Accurate Engineering Installs ATG A5 Flying Probe Tester
March 2, 2017 | Accurate EngineeringEstimated reading time: 1 minute
Accurate Engineering Inc. recently purchased an ATG A5 flying probe continuity tester. This machine uses eight test probes, four on either s (Softtouch or Micro needle probes).
The ATG A5’s smallest testable pitch is 4 mils. It can handle a PC board as thin as 0.05 mm and as thick as 2.5 mm with a maximum board size of 650 mm x 520 mm. This machine is also able to conduct high voltage tests as high as 500 V. To facilitate the further efficiency, the ATG A5 can handle flex and inner layers using its pneumatic tension shuttle.
“We felt this was a prudent purchase to help complete all the new work we’ve been receiving here at Accurate,” said Sam Sangani, owner of both Accurate Engineering Inc. and PNC Inc. “At PNC Inc., our focus on quality has become part of our identity and we hope to accomplish the same here. The ATG A5 seemed to be a logical step forward in that process.”
To further add to the speed of the process, the tester is capable of 50 scanmarks per minute while also using its four camera heads to optically check for defects.
About PNC Inc. and Accurate Engineering Inc.
At the end of 2016, PNC Inc.’s leadership fulfilled their desire to have a quality board house on the West Coast by purchasing Accurate Engineering Inc. in Sun Valley, CA. Their focus is on high-complexity flex and rigid-flex PC boards. Some of their customers include Northrop Grumman, NASA, JPL, Raytheon and Lockheed Martin. By joining forces with PNC Inc. the two companies have committed themselves to providing their customers with high-quality manufacturing made in the United States.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
04/26/2024 | Andy Shaughnessy, Design007 MagazineIn this week’s roundup, we have a variety of articles covering everything from design through assembly, and even box build. I’ve always wondered whether box build was all it was cracked up to be. Do customers really pick one EMS provider over another because one company offers box build? And if you’ve ever wanted to volunteer, IPC’s Thought Leaders Program is looking for a few good technologists to help them on their mission. Check out Stanton Rak’s article, which was published in the spring issue of IPC Community.
NCAB Group Posts Interim Report Q1 2024
04/26/2024 | NCAB GroupNet sales decreased by 17% to SEK 950.6 million (1,146.4). Compared with the year-earlier period, sales were affected bylower prices and continued inventory adjustments by customers. In USD, net sales decreased 17%. For comparable units, net sales decreased 24% in both SEK and USD.
KYZEN Announces Exclusive Partnership with Manufacturers’ Representative Restronics Florida
04/25/2024 | KYZEN'KYZEN, the global leader in innovative environmentally responsible cleaning chemistries, proudly announces its strategic partnership with Manufacturers’ Representative Restronics Florida. Just like KYZEN’s commitment to continuously improving precision cleaning, Restronics Florida serves as a consultative OEM sales representative organization dedicated to educating customers to enhance their processes and productivity.
Determining the Value-add of Box Build
04/24/2024 | Nolan Johnson, I-Connect007At a strategic level, adding box-building services makes sense for customer loyalty. But is it really that simple? Jon Schmitz, who manages customer engagement at RiverSide Integrated Solutions, talk about about what it really takes to be successful in offering EMS and final assembly services under the same company banner.
Fujitsu, METRON Collaborate to Drive ESG Success
04/24/2024 | JCN NewswireFujitsu Limited and METRON SAS, a French cleantech company specializing in energy management solutions for industrial decarbonization, today announced a strategic initiative to contribute to the realization of carbon neutrality in the manufacturing industry.