SEMI FlexTech Funds 5 New R&D Projects for Flexible Hybrid Electronics
January 19, 2022 | SEMIEstimated reading time: 1 minute
SEMI FlexTech announced more than $5 million in funding for five new research and development (R&D) projects aimed at flexible hybrid electronics (FHE) innovations for sensors, medical devices, automotive electronics and other consumer and industrial microelectronics products.
“The new projects push the limits of technology in ways that are not funded by private sector alone, illustrating the vital importance of the SEMI FlexTech program in evolving FHE technology development across multiple high-growth industries,” said Gity Samadi, Director of R&D Programs for SEMI FlexTech. “Flexible hybrid electronics help transform traditional rigid products into devices that are conforming, highly reliable, and often more sustainable.”
Project Overviews
ACI Materials will optimize the performance of its Alchemy high-film-thickness conductive sintering and semi-sintering pastes, inks, and coating for additive manufacture of higher performance FHE and direct writing in 3D printed circuit structures. Advanced inks are a key enabler to the continued growth of 3D printed components, a rapidly growing manufacturing capability. ACI is teaming with nScrypt for this 18-month project costing $510,000.
The University of Washington will demonstrate a systematic approach to in situ monitoring and machine learning control of electrohydrodynamic inkjet printing, enabling adaptable and scalable micron-scale manufacturing of 2D optics, interconnects and flexible devices. The UW will team with Iowa State University, SIJTechnology, Cyber Manufacturing and Metrology Solutions and Kent Displays on this $848,847 project.
Cornell University will apply artificial intelligence (AI) to increasing the reliability of printed electronics using optical and ultrasonic metrologies and acoustic emissions. Cornell will team with BotFactory and Geegah LLC on this $575,000 project.
GE Research will develop and demonstrate a bio-inspired soft robot for assisting a human operator in performing inspection maintenance and repair (IMR) in highly confined spaces inside industrial and defense facilities. GE Research will collaborate with Binghamton University, Georgia Tech and UES on this 18-month project costing $2 million.
GE Research will develop a high-power (?1.2kV), low-profile, low-inductance silicon carbide power module using conformable direct write interconnects and packaging. Costing $1.8 million, the 18-month project promises to make high-power, high-voltage and high-current electronics more customizable and reduce the cost of producing them in low volume.
The FlexTech R&D program is supported by the U.S. Army Research Laboratory (ARL), based in Adelphi, Maryland.
Suggested Items
Warm Windows and Streamlined Skin Patches – IDTechEx Explores Flexible and Printed Electronics
04/26/2024 | IDTechExFlexible and printed electronics can be integrated into cars and homes to create modern aesthetics that are beneficial and easy to use. From luminous car controls to food labels that communicate the quality of food, the uses of this technology are endless and can upgrade many areas of everyday life.
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Winner of The Science Show Rakett 69 Receives Incap Scholarship
04/24/2024 | IncapThe winner of the Rakett 69 science show, Andri Türkson, who stood out as an electronics enthusiast, received a scholarship from Incap Estonia, along with an internship opportunity in Saaremaa.