LPKF Launches Entirely New Flex Drilling & Cutting Laser
February 5, 2016 | LPKFEstimated reading time: 1 minute
Electronics manufacturing equipment manufacturer and laser specialist LPKF Laser & Electronics is launching an entirely new laser drilling and cutting system specifically tailored to the needs of the flexible circuit industry. The LPKF MicroLine 5000 is a UV laser based flex drilling system with a large working area of 21” x 24” and is available in two different laser power classes, depending on customer needs for various substrates and thicknesses. The system is equipped with precise process monitoring systems as well as intelligent vision systems for fiducial recognition and alignment.
Nils Heininger, Senior Vice President at LPKF explains, “We believed that the flex drilling market was underserved with the solutions currently existing in the marketplace in terms of speed, quality and cost. With LPKF being a specialist in laser based circuit processing, we felt we can do better and serve the industry with a modern laser system that is very fast and delivers superior quality drill holes at a very low cost of ownership.” Although the system is mainly focused on high-speed drilling of both blind vias and through holes, it is equally effective for contour cutting of flexible circuits. With a small laser beam spot size of only 20 µm, it allows for precise cuts of intricate flex circuit geometries. The laser system is operating in the UV wavelength allowing it to drill and cut delicate substrate materials with a minimal heat affected zone. For added flexibility, LPKF’s MicroLine 5000 can also be configured for reel-to-reel handling of flex substrates.
The company will demonstrate the LPKF MicroLine 5000 system for the first time in North America at IPC APEX EXPO 2016 (booth #228), at the Las Vegas Convention Center from March 15th through 17th, 2016 and also in Shanghai at Laser World of Photonics in booth #W5.5366.
To learn more about LPKF’s MicroLine 5000 please click here.
About LPKF
Established in 1976, LPKF Laser & Electronics manufactures milling machines and laser systems used in circuit board and microelectronics fabrication, medical technology, the automotive sector, and the production of solar cells. LPKF’s worldwide headquarters is located in Hannover, Germany and its North American headquarters resides near Portland, Oregon.
Suggested Items
Latest Test and Inspection Solutions from GOEPEL electronic at SMTconnect 2024
04/29/2024 | GOEPEL electronicGOEPEL electronic will be demonstrating automated test and inspection equipment at SMTconnect, taking place in Nuremberg from June 11 to 13, 2024.
Arlon Electronic Materials Awarded Requalification to IPC-4101 QPL for All Polyimide Specification Sheets
04/29/2024 | IPCIPC's Validation Services Program has awarded Arlon Electronic Materials Division, an electronics material manufacturing company headquartered in Rancho Cucamonga, Calif., an IPC-4101 Qualified Products Listing (QPL) requalification for the third time.
Warm Windows and Streamlined Skin Patches – IDTechEx Explores Flexible and Printed Electronics
04/26/2024 | IDTechExFlexible and printed electronics can be integrated into cars and homes to create modern aesthetics that are beneficial and easy to use. From luminous car controls to food labels that communicate the quality of food, the uses of this technology are endless and can upgrade many areas of everyday life.
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.