-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueAdditive Manufacturing
In this month’s issue, we explore additive manufacturing technology for the PCB fabricator: where it stands today, the true benefits, and where it seems to be headed.
The Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Estimated reading time: 6 minutes
Plating Process Options for Flexible Circuits
The first steps of via formation and seed plating are the same as pattern plating.After the seed coating, photoresist is imaged so it exposes only the pads that capture the via.
Copper is electroplated in the vias and pad areas as shown below.
The resist is stripped and the panel goes through a second image resist operation.
The panel then goes through an etch-strip operation—the image below shows the copper etched away. The resist is “tented” over the via to protect the through-holes from etchant.
The image below shows the resist stripped away leaving the final circuit pattern.
Plating, imaging and etching are basic operations used in flexible circuit and PCB fabrication. The sequence and combination of these operations can result in significantly different circuit configurations. Changing the order of processes can result in different plating thickness profiles. These operations are also dependent on each other for attaining desired yields. The interactions among various process steps, and achieving desired plating results, is understandably complex. We highly recommend involvement of a supplier for technical questions about specific applications.
Dave Becker is the V.P. of sales and marketing at All Flex Flexible Circuits and Heaters. To contact Becker, or read past columns, click here.
Page 2 of 2More Columns from All About Flex
All About Flex: Terms and ConditionsAll About Flex: ISO 9001 Basics
All About Flex: FAQs on UL Listings for Flexible Circuits
All About Flex: Avoiding Trace Fracturing in a Flexible Circuit
Polyimide vs. Silicone for Flexible Heaters
All About Flex: Copper Thickness Requirements for Flex Circuits
All About Flex: Copper Grain Direction
All About Flex: Options for Purchasing Flexible Heaters