Catching up with…Dr. Anthony Caputo


Reading time ( words)

I met Dr. Anthony Caputo last year while helping one of my clients secure some strong engineering talent. Anthony had been reading my columns and reached out to me since he was looking for a new opportunity in a high-tech printed circuit board facility. Once I read his CV and saw his credentials, I jumped at that chance to help this talented young man.

Anthony was also very focused on becoming an integral part of our industry and he was extremely well-educated—a Ph.D. in fact—in those things we need the most: the science of printed circuit boards. As you’ll read in the following interview he specializes in high-technology from 3D printing to CAF, HAST, and ECM. I thought I had hit the trifecta! Except for one thing. He is Canadian, which means that whoever hires him must do some paperwork to help him work here in the U.S. so that he can get his visa.

And that is the reason for this interview. I want to get Anthony’s name and most importantly, credentials and capabilities out in the marketplace. Here is someone who stands to not only help an American company with their technology, but also the industry.

We recently corresponded via email for this interview.

Dan: Anthony, please tell the I-Connect007 readers about your background.

Anthony: My pleasure, Dan. I have a very diverse background in design, reliability testing, non-destructive testing, and failure analysis of advance materials for electronic packages, 3D integrated circuit technology, 3D printing, printed circuit boards (PCBs) and assemblies, and lithium batteries for applications applicable to consumer electronics, medical devices, aerospace, automotive, electric vehicles, and down-hole oil and gas exploration. More generally, I am an expert in the following areas:  electrochemical migration (ECM), conductive anodic filament (CAF), solder fluxes, corrosion, electrochemistry, PCB design, substrate packaging, accelerated testing (i.e., temperature-humidity-bias testing)/HAST, electron microscopy, electrochemistry, semiconductors, mechanical testing, chemical synthesis, polymers, ionic liquid (molten salts that are liquid below 100 0C) electrolytes, lithium polymer ionic liquid batteries, battery safety, and the development of intellectual property for electronic and energy storage applications. 

Dan: And what is your education?

Anthony: I completed my Ph.D. at the University of Toronto, working under the supervision of Dr. Laura Turbini, who is formerly the principal scientist at Blackberry. I hold a B.S. degree in chemistry, and a Bachelor of Applied Science degree in materials engineering, also from U of T. Upon completion of my doctorate, I was a postdoctoral associate at MIT working under the supervision of Professor Donald R. Sadoway.

Dan: Anthony, in terms of the PCB industry what are your areas of expertise?

Anthony: I am an expert in the following areas: 1) Materials characterization and failure analysis (FA); 2) Li-ion polymer battery development; 3) ionic liquid, polymer development & synthesis; 4) Electrochemistry; 5) environmental accelerated testing/HAST; 6) reliability testing & development; 7) ECM and conductive anodic filament (CAF); and 8) PWB design and material selection.

More generally, I am an expert in: corrosion, reliability, ECM, chemical synthesis, semiconductor packaging, polymers, electrolyte development, battery performance, battery safety, and design of experiments. 

Dan: Let’s talk about your work history so far. What, for example, have you done in the board industry?

drtony.jpgAnthony: My doctoral work with Blackberry focused on electrochemical corrosion failure modes in printed wiring boards. All my doctoral work was conducted in an industrial setting (i.e., Blackberry's Materials Interconnect Lab), and I worked closely with PCB fabricators, material suppliers, and OEMs. This work led to several publications and invited talks. This work was very influential in understanding of how fluxes and surface finishes interact with the PCB material. My work was also very influential in understanding coupon design, and what are safe operating conductor pitches—this is very important as we move to miniaturization. 

As a postdoctoral associate at MIT, I worked on a topic unrelated to my doctoral thesis, which involved electrolyte development (both ionic liquids and polymers) using electrochemical techniques such as ac-impedance, cyclic voltammetry (CV), and high-temperature cycling of coin cells to gain an in-depth understanding of electrolyte performance to develop safer lithium polymer batteries. This work led to the development of a new polymer ionic liquid (PIL) approach to improve both the cathode/electrolyte interfacial resistance, and overall performance of the battery (U.S. Patent No. 9,203,109 B2). This work hopes to revolutionize the battery industry and produce the world’s safest and most reliable battery for a wide range of applications. My postdoctoral work has also led to several conference presentations and publications.  

Upon completion of my postdoctoral work, I joined Isola Group as a reliability scientist. My role at Isola Group was directly related to my doctoral work. As reliability scientist, I focused on ECM and CAF formation. I was responsible for developing internal ECM testing protocols, participating in industry relevant committees (i.e., member of the IPC ECM and CAF task groups), interfacing with customers, supporting the OEM marketing group, setting up and running DOEs, helping improve manufacturing quality, and performing root cause failure analysis. My work resulted in educational webinars to the industry, and in 2015 I co-authored a book chapter on ECM and CAF. I also received a special recognition award by IPC in 2016 for my leadership and work in the revision of the “IPC-9691—User Guide for the IPC-TM-650, Method 2.6.25, Conductive Anodic Filament (CAF) Resistance & Other Internal Electrochemical Migration Testing.”

Dan: What would you like to do? What kind of positiondr would you like to get?

Anthony: I have a very diverse background. Ideally, I would like to work in the electronics industry, but I am open to a variety of opportunities. I view myself as a problem solver with a wide range of expertise that I can apply to PCBs, components, assemblies, systems, coatings, Li-ion batteries etc. My interest to expand my knowledge base and apply my diverse, multidisciplinary background would be an asset to help develop, solve problems, and support many groups on a large scale at PCB fabricators, material suppliers, and OEMs. I do enjoy working with people, so consulting type roles would also be welcome.

Dan: Describe for me the position for which you would perfectly suited.

Anthony: My ideal role would allow me to apply my diverse background to help solve problems.  The role can be related to PCBs and assemblies, energy storage, reliability, failure analysis, working with design teams to help reduce potential failure risks, semiconductor packaging, batteries, etc.  A fast paced, innovative culture, which pushes the limits of technology, would be a fun environment to work in. I do enjoy working with people, so a team-oriented company would be welcomed. 

Dan: So, I understand you are in kind of dilemma since you are a Canadian citizen trying to find a position in the U.S. Tell me about that please.

Share


Suggested Items

Video from productronica 2017: Taiyo America Highlights Ink-Jettable Solder Mask

11/17/2017 | I-Connect007
After a long-term program of cooperative development, evaluation and qualification, Taiyo America’s solvent-free ink-jet solder mask formulation is working successfully in a technically demanding production environment. Don Monn recounts his experiences from the show floor at productronica 2017.

The PCB Norsemen: Industry 4.0, AI and CircuitData

11/14/2017 | Andreas Lydersen, ELMATICA
As automation works its way onto the shop floors, it still struggles to replace humans in the supporting roles, such as designers, purchasers, brokers, and back-office staff. Where automation on the shop floor replaces humans in doing repetitive manual tasks, the supporting roles (at least some of them) require intelligence to understand and utilise information.

Groundbreaking Developments at liloTree

11/09/2017 | Patty Goldman, I-Connect007
I was introduced to liloTree and Chief Scientist Kunal Shah by Joe Fjelstad. It seems this small company (with Intel as part of its pedigree) has developed a novel ENIG process that just may shake up the regular chemistry suppliers. This new process is described as cost-effective and ecofriendly while completely eliminating black pad and brittle solder joints.



Copyright © 2017 I-Connect007. All rights reserved.