-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Patty’s Perspective: Everything Old is New Again
January 19, 2017 | Patty Goldman, I-Connect007Estimated reading time: 4 minutes
Happy New Year to all of you faithful and new readers out there! I hope you are looking forward to 2017 as much as we are here at I-Connect007. We have exciting plans for this year and can’t wait to get started, but first we need to talk about this month’s topic.
This month’s issue is all about plating and surface finishes; long ago, that was pretty much my start in the world of printed circuits—wet processing. So this is kind of my home turf—and not, since I haven’t worked in wet processing for some…well, for many years. I’ve always expected that I could hop right back onto the plating room floor and pick right up where I left off all those years ago. Or could I? Have things changed much? Time to read on and see.
So what is new in plating and surface finishes? Well it’s true that there are still the basic processes—cleaners and microetches, copper and nickel and gold electroplating, immersion tin, nickel, silver—all of which have been around for quite a long time. But with the finer features, the far greater reliability concerns, the lead-free solders, the constant need for lower cost and greater efficiency, etc., the spotlight is often on these “old” processes. Plus, there are a few new ones like ENIPIG.
Much research and development has gone into refining additives for electroplating and electroless/immersion baths to improve the plating quality in one way or another, both on surfaces and in through-holes and vias. Following on that is a tremendous amount of testing to prove out said processes and the subsequent assembly-ability of components. In the end, it’s all about reliability, reliability, and reliability.
There are a plethora of final finishes to choose from today. How does one decide? Well, that takes us right to the line-up for this month. Regular columnist Tara Dunn of Omni PCB has chosen that very subject so it seems appropriate to start with her column on how to choose a final surface finish.
Following this is a study of immersion gold processes—some of that R&D work I mentioned earlier. Don Gudeczauskas, et al, of Uyemura International, present a fine research paper on a comparative study of three immersion gold processes, looking at both solderability and wire bondability.
Lest anyone think that wet processes have no effect on electrical test, Gardien Services’ Todd Kolmodin is here to set the record straight with a look at the challenges that plating and surface finishes present to electrical test.
RBP Chemical Technology’s Michael Carano is Mr. Plating himself, and he gives us a detailed look at some of those things you might tend to overlook or perhaps take for granted in your acid copper plating process. Rather than talk about controlling the typical constituents, Mike looks beyond at tank parameters and the surrounding process steps.
We are fortunate to have another R&D article, this one by Ron Blake, et al, of MacDermid Enthone Electronics Solutions. They get into another relatively new area for copper electroplating, the filling of through-holes with copper.
Next, our own Pete Starkey reports on a MACFEST development project on a “univer sal surface finish,” namely ENIPIG (electroless nickel/immersion palladium/immersion gold).
This detailed report—including ample test data—has also been recorded as a webinar and can be viewed by clicking on the link near the end of the article.
In keeping with our policy of having a few general interest items for those chemistryphobes out there, we have no less than three columnists weighing in on the U.S. presidential election—in vastly different ways. IPC President John Mitchell starts with a discussion on how the Trump presidency and potential policy shifts may affect the electronics industry. He is followed by guest columnist John Hasselmann, IPC’s VP of Government Relations, with a discussion on corporate tax policy and possible changes that may come about with the new administration in Washington, DC.
Regular columnist Barry Lee Cohen compares the “fake news” from this past presidential campaign to the potentially false news that can and probably does occur within and about your own company. Barry also provides some concrete advice on how to keep the communication lines open so news and other information can be quickly disseminated—and any false “news” can be immediately combatted.
IPC APEX EXPO 2017 happens next month (see our calendar of events) and what better time to have our magazine focus on new technology—our topic for February. We expect there to be plenty for you to read about. You can subscribe now and have The PCB Magazine delivered to your inbox every month, giving you a head start on all things PCB.
Patricia Goldman is a 30+ year veteran of the PCB industry, with experience in a variety of areas, including R&D of imaging technologies, wet process engineering, and sales and marketing of PWB chemistry. Active with IPC since 1981, Goldman has chaired numerous committees and served as TAEC chairman, and is also the co-author of numerous technical papers. To contact Goldman, click here.
Suggested Items
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources: