Miraco South Passes Phase 1 of 2 ISO 9001:2015 Certification
February 15, 2017 | Miraco Inc.Estimated reading time: Less than a minute
February of 2017 Miraco was audited and passed with no findings the first part of ISO 9001:2015 certification. This 1.75 day audit focused on the Miraco South facility which is located in Tijuana Mexico. During the audit all applicable standard requirements were reviewed, investigated and found to be compliant with objective evidence found by the auditor.
Miraco, Inc. South Operations Manager; Ricardo Mendoza stated “We have spent many hours educating our employees about the new standard while maintaining the importance of complying to both the 2008 and 2015 requirements. This was an all hands on deck situation. Communication between Miraco North and Miraco South has been flawless! Even though 5,000 miles and three time zones separate us, we communicate as if we are in the same building. Both locations processes mirror each other as well procedures. We are very proud of what we have all accomplished this week.”
Phase 2 will take place in July 2017 in Miraco, Inc. headquarters located in Manchester, NH. Upon completion of a compliant audit Miraco will officially transition certifications from ISO 9001: 2008 to ISO 9001:2015."
For more information, click here.
Suggested Items
UHDI Fundamentals: ASC Sponsors Ultra High Density Interconnect Symposium
03/21/2024 | Anaya Vardya, American Standard CircuitsAmerican Standard Circuits (ASC) is a major sponsor of an upcoming symposium on one of the most talked about new technologies that has come along in quite a while: ultra high density interconnect (UHDI).
Standards Development Propels the Industry Forward
03/20/2024 | Teresa Rowe, IPC Senior Director, Assembly and Standards TechnologyStandards development task groups will meet face-to-face at IPC APEX EXPO, April 6–11. The technical discussions provide an opportunity to share knowledge, learn from other subject matter experts, and network with others who have similar technical interests. You may remember the urgent need for coffee and the possibility of snagging a cookie or a granola bar to maintain the necessary energy level for these marathon sessions.
Flex Earns Coveted Spot on Ethisphere's 2024 World's Most Ethical Companies for Second Consecutive Year
03/12/2024 | FlexFlex announced its inclusion as one of Ethisphere's 2024 World's Most Ethical Companies in the category of industrial manufacturing. This recognition underscores Flex's unwavering commitment to ethical business practices, integrity, and corporate social responsibility.
AIM Solder Recognized for 25 Years of IPC Membership
03/08/2024 | AIM SolderAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its receipt of recognition for 25 years of IPC membership.
Demystifying the IPC Technical Activities Executive Committee Global
02/28/2024 | Linda Stepanich, IPCYou have an excellent idea for a new standard in the electronics manufacturing industry. How do you turn that idea into a reality? It’s simple: You submit a PIN to the TAEC. Now, what does that even mean? To develop a new standard, you need the help of the IPC Technical Activities Executive Committee (TAEC) Global. Ideas for new IPC standards are submitted via Project Identification Notification (PIN) to TAEC Global, which conducts an initial review. The PIN is then sent to the general TAEC standards development oversight committee for review and approval. Now, how do they review it and who comprises the committee?