Eagle Electronics: Success through 'Building Everything'
March 13, 2017 | Patty Goldman and Andy Shaughnessy, I-Connect007Estimated reading time: 7 minutes
During a recent visit to Chicago, Editors Andy Shaughnessy and Patty Goldman stopped by Eagle Electronics just outside of Chicago. Chief Operating Officer Brett McCoy gave them a tour of the facility, and spoke about the company’s plans for the future, and why Eagle is bucking the niche market trend and manufacturing a wide variety of PCBs.
Patty Goldman: We’re here at Eagle Electronics, and we’re joined by Brett McCoy, COO.
Andy Shaughnessy: Brett, why don’t you give us a little background on both the company and how you ended up here.
Brett McCoy: It is our pleasure to have you here today. Eagle Electronics has been in business since 1979. We build predominantly quick-turn prototype to high mix/low volume domestic production for the last 10+ years. This is the business in North America today and we are dedicated to supporting it. I’ve been with Eagle Electronics since 2007. My background previous to Eagle Electronics was in sales and engineering. My role today is overall company management along with the CEO of our company Mike Kalaria.
Shaughnessy: I understand you all do a lot of interesting stuff, like rigid-flex and metal back. Tell us, what's your sweet spot?
McCoy: We're building a wide range of different technologies, and that's important because the market is also very wide ranging. We build everything from metal backed, single- and double-sided boards to high layer count, 40+ layers, blind/buried via, microvia, hybrid constructions, high-speed low-loss, and edge plating/plated cavities. There's just a very broad range of technology that we can and do build. Quick turn and in-production.
Shaughnessy: You were joking about how you're not trying to be a niche manufacturer.
McCoy: The old saying is you can't be great at building everything; however, that's what we strive to do. We are building to specifications and technologies which drives us to build just about everything. This is important because we cannot turn away business in the North American market. It's incredibly important that we have the capability to support the market’s needs. Our capability and our ability to turn product quickly allows us to do just that.
Shaughnessy: When we were touring the building, you mentioned that about 70−80% of your business is from contract manufacturers. That’s pretty interesting.
McCoy: That's correct. Over the last decade, a very large portion of PCB procurement has switched over to contract manufacturers. The OEMs focus their core competencies on solutions development and design generation while relegating the assembly to EMS providers who are the experts. Full turn-key solutions are then provided to the OEMs and the PCB is the backbone of every assembled PCB.
Shaughnessy: What about your involvement in rigid-flex?
McCoy: That's a growing market for us which is also in line with the overall market trend. Our existing customers are supplying us with more of these opportunities and therefore we continue to innovate and expand our capability to support it. It is still a small percentage of our overall business but one that has seen increased demand due to limited suppliers with this capability.
Goldman: And how's business been?
McCoy: It's been consistently strong. We've had year-over-year of growth in every year since 2009. We are forecasting better than 10% growth in 2017 predominantly because of our continual investment in technology, capabilities, and personnel. We invest a significant amount of money back into our business, which can be seen when touring the facility. There are always areas we're looking to improve and add capability and/or technology.
Goldman: Tell us about some of the new equipment that you’ve been investing in.
McCoy: Most of the equipment that we've purchased has been either technology- or efficiency-driven. On the technology side, we've added critical pieces to support the HDI market. We have laser direct imaging for fine line exposing, via-fill and planarizing for through-hole via-in-pad technology, micro-mechanical drilling for microvia formation, and finally copper via fill technology to plate all microvias shut.
On the efficiency side, we have invested in additional AOI equipment expanding capacity, a strip-etch-strip line for more efficient outer layer etching, waste treatment facility upgrades reducing water usage, and we recently purchased two more micro-mechanical drill machines to reduce cycle time.
Goldman: Now, you told us a rather interesting story in the drill room when we asked about laser drills.
McCoy: Yes, several years ago, we began investigating drill systems which would allow us to form microvias. Laser drilled microvias were the industry standard, however mechanical controlled-depth drilling technology had progressed to the point where it could achieve the same. After reviewing all the capabilities of this equipment, it became clear that this was the best solution for us. Very precise, high reliability and repeatability along with the flexibility to drill any product requirement at high throughput speeds.
Laser drilling is one-dimensional, forming only microvias. Micro-mechanical drilling doesn't have some of the drawbacks that can be seen with laser drilling, like carbon deposits at the bottom of the laser via. We continue to make investments in this technology as seen with the purchase of two more machines. To one of these we have added autoload and unload capability.
Page 1 of 2
Suggested Items
SEMI Applauds U.S. Chips Act Award for Samsung Electronics Facilities to Strengthen Domestic Semiconductor Supply Chain
04/17/2024 | SEMISEMI, the industry association serving the global electronics design and manufacturing supply chain, applauded the United States Department of Commerce’s announcement of a Preliminary Memorandum of Terms for an award under the CHIPS and Science Act to support the expansion of Samsung Electronics’ presence in Texas and the company’s development and production of leading-edge chips.
Northrop Grumman honors Calumet Electronics with Supplier Excellence Award
04/17/2024 | Calumet ElectronicsNorthrop Grumman Corporation has recognized Calumet Electronics during the company’s 2024 Supplier Excellence Awards for “exceptional performance and unwavering commitment to delivering with excellence.” Calumet is one of 70 suppliers recognized from across the globe. In its award category of “Supplier Strategic Excellence,” Calumet was honored alongside global corporations such as Amazon Web Services, Dell Technologies, and Eaton Corporation.
Ark Electronics Expands Global Manufacturing Factory Network in North America and Europe
04/17/2024 | PRNewswireElectronic Manufacturing Company Ark Electronics recently announced the expansion of its Global Factory Network with the addition of Electronics Manufacturing Service (EMS) capabilities in Mexico and Europe.
Designing Electronics for High Thermal Loads
04/16/2024 | Akber Roy, Rush PCB Inc.Developing proactive thermal management strategies is important in the early stages of the PCB design cycle to minimize costly redesign iterations. Here, I delve into key aspects of electronic design that hold particular relevance for managing heat in electronic systems. Each of these considerations plays a pivotal role in enhancing the reliability and performance of the overall system.
New Yorker, Geyer Electronic Sign New Distribution Agreement
04/16/2024 | New Yorker Electronics Co.New Yorker Electronics, global distributor of electronic components, recently announced a new franchised distribution agreement with Geyer Electronic. Geyer is an international manufacturer of Quart Crystals, Oscillators and Resonators.