Stretching Beyond Flex


Reading time ( words)

Emerging end-use electronic applications are driving dramatic innovations in circuit board and interconnection technology. New form factors, functionality and durability requirements are challenging the status quo for the PCB industry and pushing design, material and process development to the limit. Incipient devices like wearables, epidermal monitors, embedded sensors, smart labels, human machine interfaces (HMIs), conformable antennas, flexible displays and in-mold electronics (IME) require a combination of circuit stretchability and toughness that isn’t achievable with conventional circuit manufacturing technologies.

Device manufacturers are seeking alternative methods for creating wiring patterns and interconnecting components that are more conformable, elastic and durable than currently available. To set the stage for a discussion on stretchable circuit technology, this article describes two classes of polymers commonly used for manufacturing circuit boards and outlines the developmental arc of two fundamental PCB materials, conductive circuits and organic substrates. The article concludes by reviewing stateof-the art, commercially available stretchable substrate and conductor technologies, as well as new materials and processes that are being researched.

Thermoplastic and Thermosetting Polymers

Broadly speaking, the polymers used for manufacturing electronics may be divided into two classes: thermoplastic and thermoset. The division is based on the degree of chemical cross-linking between the constituent molecules and the temperature-related mechanical properties this cross-linking (or lack thereof) imparts. Depending on the resin system, both classes of polymers can exhibit a wide variety of properties. For example, both thermoplastic and thermoset resins can run the gamut of hardness physiognomies from rigid and brittle to flexible and bendable to elastomeric and stretchable.

Thermoplastic polymers typically have a low degree of intermolecular cross-linking. The long chain polymer molecules are tightly “tangled” at temperatures below the glass transition (Tg), resulting in a solid or “glassy” material.

To read the full version of this article which appeared in the March 2017 issue of The PCB Magazine, click here.

Share


Suggested Items

Designing with Ultra-Thin Flexible Printed Circuit Boards

07/04/2017 | Akber Roy, Rush PCB Inc.
Designing with flexible PCBs is not much different from doing the same with rigid boards, except that the designer must account for the mechanical complexity associated with flex circuits. For instance, a flexible PCB can tear if flexed beyond its capability during installation. Therefore, it is very important to create a mechanical model of the PCB and test it for a proper fit, before taking up the electrical design.

Growth Ahead for Flexible Hybrid Electronics Industry

05/25/2017 | Heidi Hoffman, SEMI
According to Zion Research, “global demand for the flexible electronics market was valued at $5.13B in 2015 and is expected to generate revenue of $16.5B by 2021, growing at a CAGR of slightly above 21% between 2016 and 2021.” Key elements of the market, in the view of most analysts, include flex displays, sensors, batteries, and memory.

Material Choices for High-Speed Flexible Circuits

04/27/2017 | G. Sidney Cox, COX CONSULTING
Materials to make high-speed flexible circuits are now available from many material suppliers. In deciding which materials to test or use, remember the tradeoffs the suppliers made in categories we discussed: electrical properties, mechanical/flex properties, and ease of processing. A choice should only be made after considering these options. Remember with any new materials it is very important to find fabricators that are knowledgeable about processing these new materials.



Copyright © 2017 I-Connect007. All rights reserved.