Flexible Electronic Devices With Roll-To-Roll Overmolding Technology
March 31, 2017 | VTT Technical Research Centre of FinlandEstimated reading time: 1 minute
VTT Technical Research Centre of Finland has, for the first time, performed all manufacturing stages for a flexible in-moulded LED foil -in roll-to-roll process. The purpose of this demo is to prove the suitability of the technique for the highly cost-effective manufacture of products such as flexible LED displays containing printed electronics.
All smart electronics in products such as wrist-wearable computers are on a rigid board under the face of the watch. The roll-to-roll technique enables electronics to be printed on a plastic or elastomeric foil, which has various benefits such as thinness, lightness, elasticity and transparency. In hybrid-integrated systems, separate components are mounted on a printed electronic foil, after which the foil can be overmolded with thermoplastic or thermoplastic elastomer, using the injection moulding process.
"For the wristband demo, we performed all of the key manufacturing stages for printed hybrid systems – the printing of conductors, the assembly of semiconductor LEDs and the overmolding – using the roll-to-roll technique. This enables the mass manufacture of small-sized, easy-to-use, flexible electronics in a cost-effective manner," says Sami Ihme, Senior Scientist.
In practice, the roll-to-roll overmolding of a printed electronic foil involves feeding a LED foil with a foilfeeder into a mould, in which the overmolding is done. This technique is normally used to decorate plastic for various consumer products. However, the manufacture of flexible electronics – in place of graphics – involves feeding electronics with a range of electrical and optical features into a mould.
Companies invited to create new products
"The results have been promising. In the first test run for the overmolding of 186 LEDs, we achieved a 100% yield," explains Ihme.
VTT Technical Research Centre of Finland Ltd is now seeking product companies interested in trying this new technology, in order to create new product concepts for the markets.
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Winner of The Science Show Rakett 69 Receives Incap Scholarship
04/24/2024 | IncapThe winner of the Rakett 69 science show, Andri Türkson, who stood out as an electronics enthusiast, received a scholarship from Incap Estonia, along with an internship opportunity in Saaremaa.
Alternative Manufacturing Inc. Awarded QML Requalification to IPC J-STD-001 and IPC-A-610
04/24/2024 | IPCIPC's Validation Services Program has awarded an IPC J-STD-001 and IPC-A-610 Qualified Manufacturers Listing (QML) requalification to Alternative Manufacturing Inc (AMI).