A New Way to Print Electrical Circuits


Reading time ( words)

Within 15 minutes of meeting Mark Hersam, PhD, a renowned nanotechnology expert and professor of materials science and engineering at Northwestern University, Ethan Secor knew he wanted to work with him. Secor, a fifth year materials science and engineering PhD candidate, didn’t have a project in mind at the time, but when Hersam had an opening in his research group, he jumped right in — and hasn’t looked back.

Secor, from Stillwater, Minnesota, is developing graphene-based inks, which can be printed with traditional methods like inkjet printing. With the thickness of an atom, graphene is the thinnest material in the world — and one of its greatest potentials is its ability to be used as a conductor.

“For printed electronics, instead of printing red, green and blue inks, we’re printing conductors, semiconductors and insulators — different classes of electronically functional materials,” says Secor. “So instead of printing pictures, we’re printing electronic circuits.”

Scaling up

With this project’s potential for large-scale impact, Secor says there are more questions than they have time to address — and Hersam’s ability to identify the ones to answer is invaluable.

“From the beginning, Professor Hersam was very optimistic about the overall project,” said Secor. “He provided the necessary impetus to target bottlenecks in order to increase our capabilities in the lab.”

For example, when Secor started, he was making 100 milligrams of graphene at a time — which was time-consuming. Hersam encouraged Secor to explore different ways to improve the process, even investing in expanded lab capabilities so Secor could make graphene one gram at a time. “That allowed us to do considerably more — we could supply the material to collaborators and we could go after projects that wouldn’t otherwise be possible,” says Secor.

The payoff

Printing electronics with graphene inks — either on paper or plastic substrates — not only reduces the manufacturing costs of electronic components, but it also allows the use of flexible surfaces. This is critical to integrating electronics into clothing, consumer electronics and products. 

“Instead of depositing the material we want everywhere and selectively removing it where we don’t — how electronics are typically manufactured — we’re only putting material where it’s needed, so there’s less waste,” says Secor. “We’re taking mature, high-speed printing methods designed to print out hundreds of thousands of magazines and applying them to electronics.” For example, if you want to cover the desert in solar panels, it doesn’t make sense to use the technology used to fabricate computer chips. Printed electronics allow you to scale larger — even to square meters and beyond — very easily.

One reason Secor is passionate about this project is that, unlike some research projects, the practical value of graphene inks will impact everyday consumers in the very near future in a number of ways:

  • Displays: Lightweight, flexible TV or computer monitors that will be portable.
  • Smart packaging: Sensors integrated into food packaging that can detect and signal when a product is going bad to reduce food waste.
  • Wearable devices: Improved smart watch and fitness monitor design could integrate their tracking capabilities into clothing for more accurate monitoring of the body’s performance, temperature, pulse and hydration.

Since graphene offers an agile, low-cost platform, printed electronics can also open up opportunities for smaller companies to get into the industry — leading to a more innovative, dynamic market.

Inspiring future groundbreakers

Secor is just one of 30 PhD students Hersam has worked with in his research group at Northwestern — and beyond his group, that number is even higher. Throughout the science and engineering departments, Hersam’s dedication to educating the next generation of scientists is something he is known for. “The impact of a university is made by its students,” says Hersam. “The beauty of a field like nanotechnology is that it captures the imagination of young people, and will continue attracting them and bringing in the best talent.”

Hersam says he and his colleagues work hard to inspire as many students as they can. “The combined outcome of our graduate students will exceed our own,” he says. “And for nanotechnology — an area of science that truly has no limits — that’s fantastic for all society.”

Share


Suggested Items

Beyond Scaling: An Electronics Resurgence Initiative

06/05/2017 | DARPA
The Department of Defense’s proposed FY 2018 budget includes a $75 million allocation for DARPA in support of a new, public-private “electronics resurgence” initiative. The initiative seeks to undergird a new era of electronics in which advances in performance will be catalyzed not just by continued component miniaturization but also by radically new microsystem materials, designs, and architectures.

Today’s MilAero Options, Part 1: 'Pride Goeth Before...'

04/12/2016 | Marc Carter
Historians, with their 20/20 hindsight, often write about the inevitable decline and fall of kingdoms, empires, religions, organizations, governments, and all the other permanent structures we humans build.

Stretchable Inks: Changing the Wearables Market and the Landscape of Manufacturing

05/13/2015 | Barry Matties, I-Connect007
I-Connect007 Publisher Barry Matties and DuPont’s Steven Willoughby and Michael Burrows spoke recently and discussed new material for wearable electronics: stretchable inks. Wearable electronics is a fast growing sector of the electronics industry that is inspiring new and exciting products, as well as changing the requirements for becoming an electronics manufacturer.



Copyright © 2017 I-Connect007. All rights reserved.