EU Commission Launches Stakeholder Consultation on RoHS Exemptions
September 20, 2017 | IPCEstimated reading time: 1 minute
The European Union (EU) Commission launched a four-week stakeholder consultation on DRAFT Delegated Directives for exemptions:
- 6(a) Lead as an alloying element in steel for machining purposes and in galvanized steel containing up to 0.35% lead by weight
- 6(b) Lead as an alloying element in aluminum containing up to 0.4% lead by weight
- 6(c) Copper alloy containing up to 4% lead by weight
- 7(a) Lead in high melting temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead)
- 7(c)-I Electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix compound
- 18(b) Lead as activator in the fluorescent power of discharge lamps containing phosphors
- 24 Lead in solders for the soldering to machined through hole discoidal and planar array ceramic multilayer capacitors
- 34 Lead in cermet-based trimmer potentiometer elements
The consultation closes on October 17, 2017.
IPC, in conjunction with an international industry stakeholder group, applied for more than a dozen exemption extension requests under the EU RoHS Directive. The RoHS2 Directive dictates expiration dates for all exemptions granted and several critical to the electronics manufacturing industry were set to expire by July 21, 2016. However, all exemptions for which industry submitted a renewal application will not expire until the EU Commission completes the current ongoing review of the applications.
Throughout the process, IPC and several member companies provided important technical information in order to ensure the extension requests are robust and scientifically sound. IPC reviewed all extension requests and provided important feedback that resulted in credible material submitted to the EU Commission.
IPC’s EHS Committee and RoHS Exemptions Task Force will review the draft delegated acts and develop a response to the stakeholder consultation. IPC member companies are also encouraged to comment directly to EU Commission through their website.
Suggested Items
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources: