Atotech to Demo Spherolyte CU UF3 for Fine Line RDL at ECTC 2018


Reading time ( words)

Atotech will be exhibiting at the Electronics Components and Technology Conference (ECTC) 2018. As a gold sponsor, Atotech will participate with two presentations and a booth, highlighting its latest solutions for flexible electronics as well as fan-out wafer-level and fan-out panel-level packaging. The 68th ECTC will be held from May 29 to June 1, 2018, at the Sheraton San Diego Hotel and Marina in San Diego, California. Atotech’s international experts and specialists can be found at booth 207.

On Wednesday, May 30, from 8:00 – 8:25 am, Tobias Bernhard, Scientist for desmear and metallization at Atotech Deutschland GmbH, will talk about the “In-situ stress determination of electroless copper on PCB-relevant substrates”. The presentation is part of Session I on “Flexible Electronics, Substrates for High Frequency Applications” and takes place in Room Harbor Island 1. In his presentation, Tobias Bernhard will present the stress evolution of electroless Cu during and after deposition on ABF, Polyimide and on Ni-Fe in combination with Ni-containing and Ni-free commercial available electroless Cu baths.  

On Friday, June 1, from 10:50 – 11:15 am, Ralf Schmidt, Team Manager R&D for semiconductor technology at Atotech Deutschland GmbH, will present the “Optimization of electrodeposited copper for sub 5 µm L/S RDL lines by plating additives”. As part of Session 26 on “Wafer-Level Packaging Fan-In and Fan-Out Key Developments,” the presentation will be held in Room Harbor Island 2. In his presentation, Ralf Schmidt will present Atotech’s Spherolyte Cu UF3 process, which fulfills the requirements of current fine line RDL. This high-purity ECD Cu process is a three additive system designed for plating sub 5 µm Cu lines and large Cu pads while simultaneously enabling via filling. 

Spherolyte Cu UF3: Micro via filling post anneal

The ECTC is one of the premier international events bringing together the best in packaging, components and microelectronic systems science, technology and education in an environment of cooperation and technical exchange. As such, it is the perfect place for companies like Atotech to present and exhibit their innovative systems and product solutions. The 2018 ECTC will feature, among others, about 40 technical sessions, 16 professional development courses, and a technology corner for exhibitors. 

Visitors to the show are invited to join Atotech’s presentations or pass by booth 207 during the ECTC show. At the show, visitors can find out more about Atotech’s market-leading manufacturing tools, such as MultiPlate® - a systems solution for double sided (DS) ECD on wafer and DS electrolytic plating on glass panels. Atotech will also present its applications for the HDI, package substrate, semiconductor, flex/rigid-flex, PCB and IC leadframes markets. Local and international specialists will be on site to discuss any question or inquiry. 

About Atotech

Atotech is one of the world’s leading manufacturers of specialty chemicals and equipment for the printed circuit board, IC-substrate and semiconductor industries, as well as for the decorative and functional surface finishing industries. Atotech has annual sales of USD1.2 billion (2017). The company is fully committed to sustainability – we develop technologies to minimize waste and to reduce environmental impact. Atotech has its headquarters in Berlin, Germany, and employs about 4,000 people in over 40 countries. About a quarter of all staff works in one of the four locations in Germany: Berlin, Feucht, Neuruppin, and Trebur. For more information, click here.                       

Share


Suggested Items

Substrates for Advanced PCB Technologies: What Will the Future Hold?

11/06/2018 | Pete Starkey, I-Connect007
The UK chapter of the global IMAPS community of electronics and microelectronic packaging engineers shared a wealth of knowledge and wisdom about PCB substrate technology trends, developments, and future requirements in a webinar on the first of November.

Copper Pillar Plating Systems: High Speed, Low Heat

11/01/2018 | E. Walch, DJ., C. Rietmann, Ph.D., and A. Angstenberger, Ph.D.
The industry is seeing ever-more stringent requirements of interconnect technologies (ICT) from die through final assembly, in particular digital and analog high frequencies, undistorted signal propagation and efficient heat propagation are concerned.

Additive Electronics: PCB Scale to IC Scale

10/26/2018 | Tara Dunn, OMNI PCB
SAP, mSAP, SLP—what kind of crazy acronyms have we adopted now, and how much do you really need to know? In terms of consumer electronics, there is a good chance that the smartphone attached to your hand at all times contains a PCB fabricated with this technology—or at the very least, the next-generation smartphone that you purchase will utilize mSAP technology.



Copyright © 2018 I-Connect007. All rights reserved.