Candor is Breaking Boundaries with Flex-Core Boards


Reading time ( words)

Candor Industries has successfully manufactured 0.5-mil flex-core boards with 0.5-oz copper and 4-mil plated vias.

Sunny Patel, Candor’s technical sales manager, remarked about the accomplishment, "We are pushing the limits on our flex manufacturing, going for much thinner substrates and different material stiffeners."

Thinner material processing allows for better real estate savings for Candor’s flex customers when fitting into smaller packaging. By working together with Candor, developing these types of prototypes will allow for faster lead times with better cost savings down the road.

"Customers need hard, but thin, materials in thin core applications. We’ve found that stainless steel is a good fit for this and we can easily provide this service in-house using our unique flex processing,” said Patel.

Conventional board shops may have trouble getting tooling holes in stainless without CNC subcontracting. Due to their continual investments in the needs of their customers, Candor is able to provide detailed cutting of stainless sheets in-house.

About Candor Industries

Since 1999, Candor Industries has provided 21st Century customers with innovative PCB solutions for complex technologies through a commitment to service and support. Limitations created by standard manufacturing methods led Candor to invent and develop certain technological advancements, helping them to emerge in the forefront as a top of the line solutions provider. Candor continues to push the envelope of PCB manufacturing through continuous R&D, helping both customers and the industry to a brighter future. For more information about Candor, click here.

Share


Suggested Items

More Than a Word: Solder Mask

08/15/2018 | Patty Goldman, I-Connect007
Do you spend time, as I do, musing on the language of PCBs? We have developed our own lexicon to convey as much by picture, as by word, what exactly we mean.

Calumet Electronics on IMPACT 2018

08/14/2018 | Patty Goldman, I-Connect007
This year at IMPACT Washington, DC, I-Connect007's Patty Goldman sat down with Steve Vairo and Mike Kadlec of Calumet Electronics, to get their overview on the event.

Study on Application of Four-Wire and Four-Terminal Flying Probe Test Scheme

08/10/2018 | Jin Erbing, Joint Stars Technology Co., Ltd
With the four-wire and four-terminal flying probe test method, voids in the holes formed in the PCB due to process differences, thin copper, and poor conduction due to residual adhesive after laser drilling of the HDI board can be detected, and the circuit board guide can be solved. With the development of multilayer, high-density PCB layout, four-wire four-terminal flying probe testing will play an increasingly important role.



Copyright © 2018 I-Connect007. All rights reserved.