Benefits of Low-Temp Soldering: I-007eBook Now Available


Reading time ( words)

Tired of solder joint failures? Get your head off the pillow! Learn about opportunities and solutions provided by low-temperature soldering in I-Connect007’s newest micro eBook: The Printed Circuit Assembler’s Guide to… Low-Temperature Soldering.

The Printed Circuit Assembler’s Guide to… is an ongoing book series specifically dedicated to educating PCB assemblers and serves as a go-to resource for essential assembly topics.

Written by Morgana Ribas and other expert authors from Alpha Assembly Solutions, this book provides an introduction to the evolution of modern low-temperature soldering, illustrates the importance of chemistry when developing low-temperature solders, and discusses advanced and emerging applications where lower melting point alloys can provide unique assembly solutions.

“Due to the recent burgeoning in the use of low-temperature solders within the electronics assembly industry, much has been written about bismuth- and tin-based solders and solder pastes. This book does a good job of distilling out the chaff and focusing on the most relevant, valuable information available,” says Raiyo Aspandiar, senior engineer at Intel Corporation.

Readers will learn the benefits low-temperature alloys have to offer, such as reducing costs, creating more reliable solder joints, and overcoming design limitations with traditional alloys.

Download your free copy today! You can also view other titles in our full library.

We hope you enjoy The Printed Circuit Assembler’s Guide to… Low-Temperature Soldering.

For more information, contact:

Barb Hockaday
I-007eBooks

+1-916-365-1727 (GMT-8)

Share

Print


Suggested Items

PCB Design, Fabrication and Use from the Mil-Aero End-User Perspective

08/28/2018 | Pete Starkey, I-Connect007
The procedures described for Rolls Royce were directly comparable with those described for MBDA, and the presenters were unanimous in re-emphasising the importance of working closely with their chosen PCB fabricators at all levels and all stages of design, qualification and production of their circuit boards.

Thermal Capabilities of Solder Masks: How High Can We Go?

08/24/2018 | Sven Kramer, Lackwerke Peters
This article focuses on three different coating material groups that were formulated to operate under high thermal stress and are applied at the printed circuit board manufacturing level. While used for principally different applications, these coatings have in common that they can be key to a successful thermal management concept especially in e-mobility and lighting applications.

Circuit Automation on the Ever-Evolving World of Solder Mask

08/23/2018 | I-Connect007 Editorial Team
In a recent conference call, I-Connect007 editorial team was joined by Circuit Automation’s Yuki Kojima, VP of engineering; Larry Lindland, sales and applications manager; and Tom Meeker, CEO, for a lively discussion about solder mask. Spoiler: It’s not all about the equipment.



Copyright © 2018 I-Connect007. All rights reserved.