Flex Circuit Assembly: Challenges and Strategies for Success


Reading time ( words)

The continuing trend towards miniaturization and the increasing functionality in smaller and smaller devices are the primary drivers for the growth of the flexible printed circuit market. Everything is getting smaller, faster, and more complex. The segments that have consistently driven it are more on the consumer side, such as mobile phones and smart electronics. On the industrial side, contributing markets include medical—portable medical electronics, diagnostic electronics—and military/defense.

Of course, dealing with flex circuits during assembly is very different from rigid PCBs. And among the key challenges here are the material itself, and the word 'flexible,' according to David Moody, director of sales and marketing at Lenthor Engineering: "Flexible circuits are flexible; they aren’t flat, they aren’t rigid, and they conform to a shape. The other portion of it is the three-dimensionality of a flex circuit; you’re trying to do circuit mount assembly with small components, BGAs, and working on substrates’ flex circuits that often have different plane levels. There are higher portions on the circuit, so evening things out is really the challenge to getting the nice, flat, secure surface to mount the components on."

Lenthor has been in the flex and rigid-flex fabrication business for 35 years. It brought in-house flex and rigid-flex assembly 10 years ago as a value-add for its customers. Moody notes that it had been difficult for them and their customers at the time to find people in the assembly business that had a proficiency in flex circuit assembly, because there are some peculiarities regarding flex circuitry that you don’t find in rigid board assembly. "Being able to bring that in-house, we’ve been able to advance that portion of our offering to the customers."

Fig1_FA-SL-June2018.jpg

Dealing with flex circuit assembly, Lenthor does a good mixture of hand assembly and automated assembly. "Flex circuits themselves generally have a combination of some hand assembly, and automated, surface-mount line, reflow, and pick and place," explains Moody. "Rigid-flex design typically replicates rigid-board assembly, because most of the functionality on a rigid-flex board is all centered in the rigid area. The flex area of a rigid-flex is usually the interconnect between the flex areas. So, it becomes a little less problematic; but flex circuits themselves do lend themselves far more to the multiple process environment."

Lenthor found flex circuit assembly challenging initially. “Luckily for us, we hired a really good engineer who’s been able to design a lot of the fixturing that we use, and that’s what really makes us succeed in assembly,” says Moody. “In the beginning it was difficult, there was far more rework than we have today. But the techniques, the equipment that we’ve got now, have really lent themselves to an assembly that’s predictable. We get a very good first yield rate. I would guess it’s 96-97% in the first pass yield. It wasn’t that way 10 years ago.”

Indeed, when dealing with flex circuits, the overarching theme to ensure successful assembly is proper fixturing.

According to Bob Wettermann, principal of BEST Inc., an electronics rework/repair and PCB assembly firm, "In the rigid world, you have a coplanar surface and components with known fixed dimensions, and so the pick and place machine knows exactly how and where to place the device. It’s always a planar surface. Now, you add the three dimensionality as well as the lack of rigidity of the surface and it becomes very difficult to place micro components on essentially a noodle."

"Fixturing is key to tackling this problem. Having a good coplanar surface to remove and replace devices is key to reworking complex devices on flex circuitry. In terms of physical repair, such as IPC-7721-related type of physical repairs, there just aren’t any standards for flex materials. You have to make the process up as you go along. The other day, a client sent us a case where we were refereeing the acceptability criteria for the solder joints of an SOIC placed onto a flex circuit. We were dealing with an epoxy attachment to flex. And guess what? There are no industry acceptability criteria. So, it’s still a little bit of the Wild West, I would call it, in terms of standards, knowledge and practices. You make it up as you go along."

Throw it Over the Wall

In our conversations with industry experts, they always mention a critical factor to success when it comes to design, fabrication, or assembly—communication along the supply chain. Because most often than not, the industry continues to have a 'throw it over the wall' mentality.

This case is no different. "It's just because of the kind of business that we are in in terms of assembly—we're the prototyping guys, so our job is to get the customer functional units so they can go to round two or round three," says Wettermann. "Generally, the boards are not ending up in end customers' hands. Our job is to get functional units."

Moody echoes what Wettermann is saying. "In the prototype stage, a lot of customers are just simply looking to get some functionality out of the initial product, and they just want you to go figure it out. On the other hand, because we do get into some production stuff with our customers, and it’s still interesting to me that when we begin the conversation, and we begin in sometimes even at the design stage, the assembly aspect of the build is still not being considered until it’s almost necessary. No matter how much you try to drive the conversation in the beginning, I don’t know why, but there is still some reluctance to concentrate on what the assembly is going to has to be done before assembly."

Share




Suggested Items

VJ Electronix: Automating the X-ray Inspection Process

05/04/2022 | Nolan Johnson, I-Connect007
VJ Electronix's Brennan Caissie shares the benefits of a new inspection tool that can be used on a variety of boards, with an automated system that takes the pressure off the manufacturing floor operators and can provide feedback all the way to the design process.

Dave Hillman on Living Your Passion

03/29/2022 | Barry Matties, I-Connect007
Barry Matties leads this engaging retrospective conversation with Dave Hillman, a Fellow, Materials and Process engineer at Collins Aerospace, who talks about mentorship, pandemic changes, and solder. “Soldering is soldering,” Dave says. “But how we do that keeps evolving in response to the new technologies and smaller packages.” What’s the key to his success and longevity? “Find your passion.” Here’s how he’s done it.

IPC’s Dieter Bergman Fellowship Award Presented to Bev Christian, HDPUG

03/14/2022 | Patty Goldman, I-Connect007
The Dieter Bergman IPC Fellowship Award is given to individuals who have fostered a collaborative spirit, made significant contributions to standards development, and have consistently demonstrated a commitment to global standardization efforts and the electronics industry. Bev Christian is a facilitator for the High Density Packaging User Group (HDPUG) and an adjunct associate professor in the Department of Mechanical and Mechatronics Engineering of the University of Waterloo, Waterloo, Ontario, Canada. In the past 31 years he has held positions at Nortel, BlackBerry, and CALCE; all in the areas of materials and failure analysis. Bev has never missed an IPC APEX EXPO since its inception. He is a member of 27 IPC committees and attends as time and the lack of clones allow.



Copyright © 2022 I-Connect007. All rights reserved.