NextFlex and Profusa Unveil Skin-worn Reader Prototype for Continuous Oxygen Monitoring at FLEX 2019
February 18, 2019 | Business WireEstimated reading time: 2 minutes
A reader worn on the skin and working in conjunction with an injected hydrogel sensor for real-time oxygen monitoring in tissue is being unveiled today at the FLEX 2019 conference by integrated biosensor maker Profusa and NextFlex, America’s Flexible Hybrid Electronics (FHE) Manufacturing Institute.
The Lumee Oxygen Platform is intended for use in patients with potential acute and/or chronic changes in tissue oxygen levels who may benefit from continuous monitoring. The injectable hydrogel sensor is currently CE Marked in Europe and it is not yet commercially available elsewhere.
“Ten years ago, you couldn’t build a reader that could sense multiple signals and filter out the ‘noise’ of the body’s other signals, all while being small and skin-worn,” said Ben Hwang, CEO of Profusa. “With the latest advancements in flexible hybrid electronics technology, it’s just mature enough to work the way we want — primarily because we selected the right domain expertise partner to work with, namely NextFlex. Rather than managing development across multiple R&D and manufacturing facilities, we found a single place at NextFlex’s Technology Hub, where we could develop our solution in very short time and have the right conversations to move our reader design toward production at scale.”
The skin-worn reader was developed in record time, just in four months, at NextFlex’s research center and fab in San Jose, Calif., since the facility and the team combine expertise in flexible hybrid electronics, engineering, materials science and optics all reside under one roof. NextFlex has taken Profusa’s design work and criteria, and pushed them toward a smaller, flexible reality that works in harmony with Profusa’s tissue sensors. With this stage completed and other medical devices in the pipeline, NextFlex is engaged in the application for FDA approval for medical device manufacturing.
“We’ve been able to take technology that could previously only be deployed in a hospital setting and move toward having a device with clinical-grade information in a wearable and flexible form that’s attractive to consumers, like Profusa’s skin-worn reader for tissue oxygen monitoring,” said Wilfried Bair, NextFlex Vice President of Engineering. “This reflects the accelerated adoption of wireless and flexible hybrid electronics technologies in the digital health era, with wearable devices that generate data that medical doctors and consumers can get the most out of.”
To see a prototype of the reader, which is not yet commercially available, and demonstrations of its manufacturing process, please visit booth number 1002 at FLEX 2019.
About NextFlex
NextFlex, America’s Flexible Hybrid Electronics Manufacturing Institute, is a leading force in the Manufacturing USA network of Institutes. Formed through a cooperative agreement between the U.S. Department of Defense (DoD) and FlexTech Alliance, NextFlex is a consortium of companies, academic institutions, non-profits and state, local and federal governments with a shared goal of advancing U.S. manufacturing of FHE. Since its formation in 2015, NextFlex’s elite team of thought leaders, educators, problem solvers, and manufacturers has come together to collectively facilitate innovation, narrow the manufacturing workforce gap, and promote sustainable manufacturing ecosystems.
About Profusa
Profusa is leading the development of bioengineered sensors that become one with the body to detect and continuously transmit actionable, medical-grade data of body chemistry for personal and medical use. Overcoming the foreign-body response to in-body monitoring for long-term use, its tissue-integrated biosensors open the door to accessing, connecting and applying body chemistry in unprecedented ways, transforming the management of personal health and disease. Please visit profusa.com for more information.
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Winner of The Science Show Rakett 69 Receives Incap Scholarship
04/24/2024 | IncapThe winner of the Rakett 69 science show, Andri Türkson, who stood out as an electronics enthusiast, received a scholarship from Incap Estonia, along with an internship opportunity in Saaremaa.
Alternative Manufacturing Inc. Awarded QML Requalification to IPC J-STD-001 and IPC-A-610
04/24/2024 | IPCIPC's Validation Services Program has awarded an IPC J-STD-001 and IPC-A-610 Qualified Manufacturers Listing (QML) requalification to Alternative Manufacturing Inc (AMI).