New Polymer Mixture Creates Ultra-Sensitive Heat Sensor
April 3, 2019 | Linköping UniversityEstimated reading time: 2 minutes
Scientists at the Laboratory of Organic Electronics have developed an ultra-sensitive heat sensor that is flexible, transparent and printable. The results have potential for a wide range of applications – from wound healing and electronic skin to smart buildings.
The ultra-sensitive heat sensor is based on the fact that certain materials are thermoelectric. The electrons in a thermoelectric material move from the cold side to the warm side when a temperature difference arises between the two sides, and a voltage difference arises. In this present project, however, the researchers have developed a thermoelectric material that uses ions as charge carriers instead of electrons, and the effect is a hundred times larger.
A thermoelectric material that uses electrons can develop 100 µV/K (microvolt per Kelvin), which is to be compared with 10 mV/K from the new material. The signal is thus 100 times stronger, and a small temperature difference gives a strong signal.
Nature Communications
The results from the research, carried out by scientists at the Laboratory of Organic Electronics at Linköping University, Chalmers University of Technology, Stuttgart Media University and the University of Kentucky, have been published in Nature Communications.
Dan Zhao, research fellow at Linköping University and one of three principal authors of the article, has discovered the new material, an electrolyte that consists of a gel of several ionic polymers. Some of the components are polymers of p-type, in which positively charged ions carry the current. Such polymers are well-known from previous work. However, she has also found a highly conductive polymer gel of n-type, in which negatively charged ions carry the current. Very few such materials have been available until now.
First Printed Thermoelectric Module in the World
With the aid of previous results from work with electrolytes for printed electronics, the researchers have now developed the first printed thermoelectric module in the world to use ions as charge carriers. The module consists of linked n- and p-legs, where the number of leg connections determines how strong a signal is produced. The scientists have used screen printing to manufacture a highly sensitive heat sensor, based on the different and complementary polymers. The heat sensor has the ability that convert a tiny temperature difference to a strong signal: a module with 36 connected legs gives 0.333 V for a temperature difference of 1 K.
“The material is transparent, soft and flexible and can be used in a highly sensitive product that can be printed and in this way used on large surfaces. Applications are found within wound healing, where a bandage that shows the progress of the healing process is used, and for electronic skin”, says Dan Zhao.
Another possible application is in temperature exchange in smart buildings.
Suggested Items
Nihon Superior Sets New Standards in Lead-Free Soldering Technology at APEX 2024
03/13/2024 | PVANihon Superior Co. Ltd., an advanced joining material supplier, will exhibit in Booth 1325 during the 2024 IPC APEX EXPO, scheduled to take place April 9-11, 2024 at the Anaheim Convention Center in California.
Indium Corporation to Showcase Proven EV Products and High-Reliability Alloys at Productronica China
02/28/2024 | Indium CorporationAs a materials pioneer and trusted partner in electric vehicle (EV) and e-Mobility manufacturing, Indium Corporation is proud to showcase its high-reliability alloys and soldering solutions at Productronica China, March 20-22, in Shanghai.
UL-Authorization Received for Ventec High-CTI, Halogen Free FR15.1 Substrates VT-447C and VT-441C
02/27/2024 | VentecVentec International Group Co., Ltd. , is pleased to announce that UL’s evaluation of two of Ventec’s halogen-free, phenolic cured high-CTI substrates have received authorization to apply the UL mark.
KIC to Discuss Revolutionary Contact-less Thermal AnalysisTM at SMTA Dallas Expo and Tech Forum
02/09/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, will exhibit its latest breakthrough technology, Contact-less Thermal AnalysisTM, at the SMTA Dallas Expo and Tech Forum.
AIM to Highlight NC259FPA Ultrafine Solder Paste & Present on Low Temp Solder at IPC APEX 2024
02/09/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming IPC APEX EXPO 2024 taking place April 9-11 at the Anaheim Convention Center in Anaheim, California.