Polarizer Supply the Tightest in Four Years
May 13, 2019 | TrendForceEstimated reading time: 2 minutes
According to the newest observations by WitsView , a division of TrendForce , China's high-generation panel manufacturers are expanding at an alarming rate. Additionally, average TV sizes continued to expand, and production capacities of super-wide 2500mm substrates that may be economically cut to 65 inches and 75 inches for polarizer suppliers were not ramped up in time, causing polarizer supply to tighten this year. The glut ratio dove under 5% for the first time in four years and came to a mere 3.3%.
Polarizers in Low Supply, Raising the Bar in Procurement and Price Negotiations for Panel Manufacturers
TrendForce Assistant Research Manager Julian Lee points out that, although this year saw the addition of LG Chemical's wide 1490mm panel line at its Nanjing plant, this was merely a change in production base and not an increase in production capacity. Kunshan Cheng Mei Materials' super -wide 2500mm production line, set to begin mass production this year-end, is expected to enter full swing in 2H20. Yet looking at the newly added panel production capacities for this year, we already see CSOT's Gen 11 line and HKC's Gen 8.6 line beginning mass production in 1H, and Sharp's Gen 10.5 line in Guangzhou beginning in 2H. An imbalance has occurred in polarizers' supply/demand structure, yet the total supply area still remains larger than that of demand.
Polarizer manufacturers have been increasingly replacing TAC films with PMMA/PET films and COP films, yet non-TAC films still form the supply minority, its capacity expanding but slowly in the past few years. They've also failed to catch up with high- generation panel manufacturers in production capacity, causing polarizer supply to tighten somewhat this year. Panel manufacturers may even face situations such as unmet emergency orders or delayed delivery schedules, but they won't be severe enough to affect panel shipments. Nevertheless, many TV panel prices are hovering just above cash costs, whereas polarizer prices refuse to drop. The increased difficulty in negotiations remains to be the largest impact on panel suppliers from these events.
Top Three Polarizer Vendors Combined Comprise 65% of Production Capacity; China's Vendors to Rise in 2020
According to TrendForce's calculations, the total effective polarizer production capacity area for the whole 2019 year is projected to stand at 566 million square meters, while the top three suppliers—LG Chemical, Nitto Denko and Sumitomo Chemical—hold a combined market share of 65% , and are not going anywhere anytime soon. Samsung SDI is ranked at 4th place and takes up 9% of global capacity; Taiwan manufacturers such as Cheng Mei Materials, BenQ Materials and Optimax hold a combined share of 15%; China Manufacturers SAPO, Sunnypol and Sheng Bao Lai take up 8%. All other suppliers make up the remaining 3%.
China manufacturers are predicted to rise significantly in influence beginning in 2020. If Hangzhou Jinjiang Group's SAPO and Kunshan Cheng Mei Materials both open up their 250mm production lines by then, China's polarizer providers will form a double digit share of global production capacity for the first time in history, arriving at 11%.
About TrendForce
TrendForce is a global provider of the latest development, insight, and analysis of the technology industry. Having served businesses for over a decade, the company has built up a strong membership base of 435,000 subscribers. TrendForce has established a reputation as an organization that offers insightful and accurate analysis of the technology industry through five major research divisions: DRAMeXchange, WitsView, LEDinside, EnergyTrend and Topology. Founded in Taipei, Taiwan in 2000, TrendForce has extended its presence in China since 2004 with offices in Shenzhen and Beijing.
Suggested Items
Indium Corporation, Industry Partners to Showcase Products “Live@APEX”
03/26/2024 | Indium CorporationIndium Corporation®, in cooperation with its industry partners, will feature its proven solder solutions live on the show floor throughout IPC APEX Expo from Apr. 9‒11 in Anaheim, Calif., U.S.
Dymax Will Exhibit Light-Cure Solutions for Today’s Electronics at IPC APEX 2024
03/26/2024 | DymaxDymax, a leading manufacturer of rapid and light-curing materials and equipment, will exhibit at the IPC APEX EXPO 2024 in Anaheim, CA, April 9-11.
Ventec to Launch New Bondply Dielectrics and Value-Added Services at IPC APEX EXPO 2024
03/26/2024 | Ventec International GroupVentec International Group is to reveal new products for advanced signal integrity and thermal performance, and introduce services, during IPC APEX EXPO 2024, April 9-11 on booth # 4309.
Electra Polymers Ltd Expands Manufacturing Capacity, Invests in New Facilities and Talent
03/26/2024 | Electra Polymers LtdElectra Polymers Ltd, a leading provider of coatings for the electronics industry, proudly announces a significant expansion of its manufacturing capacity for inkjet materials. The company is making substantial investments in new facilities, talent acquisition, and cutting-edge laboratory equipment to meet the increasing demand for high-performance functional inkjet materials in the market.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
03/22/2024 | Nolan Johnson, I-Connect007This week's news feed contains a bunch of big money items, as well as some interesting industrial and technology puzzles to be solved. There’s even some down-home people news from the Dallas SMTA conference held this week. Don’t overlook the latest issue of PCB007 Magazine, either. The topic is sustainability, which is becoming an ecosystem of its own.