Register Now for the IPC Electronics Materials Forum


Reading time ( words)

The IPC Electronics Materials Forum is an interactive 3-Day technical forum focused on developments in materials and processes associated with advanced electronics assembly and manufacturing. While it is possible to envision many future technologies, they will never be fully realized without the materials and processes to manufacture them. New and emerging technologies such as semi additive processes are expanding our existing materials set targeted for the applications of 5G, automotive, defense and aerospace, and medical electronics. 

This conference which will be held November 5–7, 2019 in Minneapolis (Bloomington), Minnesota, will focus on materials for board fabrication, assembly, and post-assembly protection.

Here’s a sneak peek at some of our distinguished speakers:

  • Dr. Ning-Cheng Lee, Indium Corporation
  • Laura Cohen, Ph.D. and Stan Rak, Continental Automotive Systems, Inc.
  • Mike Vinson, Tara Dunn, Averatek
  • Audra Thurston, Calumet Electronics Corporation
  • Robert Carter, FaradFlex
  • Shahriar Naghshineh, LBN, Inc.
  • Sarah Czaplewski, IBM
  • Jessica Reed, Apollo Seiko
  • Jim Stockhausen, AltanaPDG Inc.
  • Rakesh Kumar, Specialty Coating Systems, Inc.
  • Maria Kogia, Jean-Marc Lucatelli, Donna Dykeman Ph.D., ANSYS/GRANTA, Cambridge UK 

Who should attend? This forum is ideal for process engineers, those developing new technology and sourcing materials, and anyone interested in cutting edge technology for the electronics industry. Networking opportunities will be provided throughout.

To register, click here.

Share

Print


Suggested Items

UV-curable Materials and Conformal Coatings

12/23/2019 | Pete Starkey, I-Connect007
Pete Starkey and Phil Kinner, global business and technical director, coatings division, Electrolube, discuss the characteristics and benefits of the company’s new UV-cured conformal coatings. Phil also describes the development of coatings for critical avionics applications and Electrolube’s collaboration with the U.K. National Physical Laboratory to establish a new condensation test.

Reliability Testing in Automotive and Digital Factories

12/11/2019 | Barry Matties, I-Connect007
Barry Matties spoke with Gen3’s Andrew Naisbitt about what readers should know about SIR and CAF testing, what to consider if you’re thinking of bringing it in-house, and how reliability testing fits into automotive and the digital factory.

André Bodegom on European Challenges, Automation, and Automotive

12/02/2019 | Pete Starkey, I-Connect007
Editor Pete Starkey speaks with André Bodegom, managing director for Adeon Technologies in the Netherlands, about changes he has seen over the years in major industry sectors, challenges in the European market, and other areas of growth.



Copyright © 2020 I-Connect007. All rights reserved.