Weaving Advocacy into E-Textiles


Reading time ( words)

Electronic textiles (e-textiles)—fabrics that have electronics embedded in them to achieve certain functions – are of growing interest in the electronics manufacturing industry, and thus they are of growing interest to the IPC Government Relations team as well.

E-textiles and their requisite parts on display at the Drexel Center for Functional Fabrics

E-textiles are being developed and/or used for a variety of interesting applications, from sensing physiological changes in medical patients; to monitoring vital signs of military service members; to displaying warning lights on clothing that can call attention to first responders.

To learn more, last week I attended IPC E-Textiles 2019, a conference at the Drexel Center for Functional Fabrics (CFF) in Philadelphia, where designers, suppliers, engineers, and innovators met to exchange knowledge, network, and tour the CFF.

I learned that the IPC D-70 E-Textiles Committee has finalized an industry standard called IPC-8921, Requirements for Woven and Knitted Electronics Textiles Integrated with Conductive Fibers, Conductive Yarns and/or Wires, which is the first standard of its kind. I also heard from more than a dozen experts on the latest developments and challenges regarding materials, processing, testing, and applications.

As a member of IPC’s Government Relations team and as an environment, health and safety (EHS) professional, my objective was to bring the IPC spirit of innovation and collaboration to develop an advocacy strategy for e-textiles. As this field continues to evolve, IPC will be working to learn more from our members, educate policymakers, and advocate for policies that will support further progress. We’ll also be looking to collaborate with other associations and organizations touched by e-textiles—including in the military, medical, and automotive industries—to develop a comprehensive agenda backed by varied stakeholders with shared interests.

Advocating for innovation requires educating those outside of the innovation space. The IPC GR is well positioned to connect those on the inside with those on the outside to lessen the distance between the two.

To learn more or participate in our advocacy efforts, please visit our website

Share




Suggested Items

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

09/23/2022 | Andy Shaughnessy, Design007 Magazine
It’s officially fall now, and in Atlanta the temperature has plummeted to the mid-80s. We’ve all bumped our air conditioners up to 74 degrees. That means it’s trade show season, and I’ve been busy looking for my suitcase. This week, we have an assortment of news about associations, education, and advocacy, as well as another installment of our Printed Electronics Roundtable. And if you’re looking for a job, you are in luck; our jobConnect007 section is chock-full of open positions at all levels in this industry.

IPC: Companies Are Intentional About Tracking Environmental and Social Risks

09/22/2022 | Suhani Chitalia and Kelly Scanlon, IPC
Leading companies in the electronics manufacturing industry are highly intentional about their environmental, social and governance (ESG) priorities, with climate change and energy use among the most closely scrutinized issues, an IPC analysis shows. As part of IPC’s ESG for Electronics initiative, IPC is interested in developing resources for members on the most common ESG methods and priorities of leading companies across the electronics value chain. In support of this, IPC has preliminarily analyzed the ESG reports of approximately a dozen companies in selected portions of the industry.

EIPC Technical Snapshot: Novel Laser-based Manufacturing Processes in Automotive Electronics

09/22/2022 | Pete Starkey, I-Connect007
“Summer is over, now it's back to work!” This was the opening line of the invitation to the 18th EIPC Technical Snapshot webinar, Sept. 14, following the theme of advances in automotive electronics technology, introduced and moderated by EIPC President Alun Morgan. The first presentation, entitled "The fully printed smart component—combining additive manufacturing and sensor printing," came from Jonas Mertin, a thin-film processing specialist at the Fraunhofer Institute for Laser Technology.



Copyright © 2022 I-Connect007. All rights reserved.