Toyochem Develops Highly Flexible EMI Shielding Film for High-speed FPCs
January 22, 2020 | ToyochemEstimated reading time: 1 minute
Toyochem Co., Ltd., a member of the Toyo Ink Group, has launched a highly flexible electromagnetic interference (EMI) shielding film, the LIOELM™ TSS510-HF, designed to meet the demanding performance requirements of 5G flexible printed circuits (FPCs). The newly developed TSS510-HF addresses the needs of today’s electronics designers for improved shielding performance for the transmission of high-frequency signals and for high flexibility so circuits do not break when bent.
The flexibility of FPCs has seen their adoption in a wide range of industrial and consumer electronic devices. As the mobile world transitions from 4G to 5G, the demand for higher performance flex circuits is expected to grow in line with demand for more advanced smartphones and 5G/IoT devices, including camera flex circuits, display flex circuits and wearable devices. While copper plating technology is typically used in the manufacturing of FPCs to absorb radio and other EMI waves, copper is not ideal for applications that require high flexibility, often cracking when the circuit is bent or folded, or burring during the die-cutting process.
Addressing these challenges, Toyochem technicians in Japan engineered the TSS510-HF shielding film to exhibit extraordinary flexibility, with no cracking even after bending the film 20 times at a 180 degree angle, 2kg load (see Image 2). Toyochem was able to achieve these advances by using a flexible and conductive urethane resin in place of traditional copper wiring as the EMI shielding material. The resin was first dispersed with a conductive filler, which generates a resin composite with enhanced compatibility between film flexibility and tensile strength. The optimized film structure enabled the company to solve the cracking and burring issues associated with copper foil shields.
Performance tests of the TSS510-HF shielding film demonstrated reduced transmission loss at the -6.5 dB level at 15 GHz, relative to -8.5 dB for conventional shielding films. Shielding effect testing generated values greater than 70 dB at 15 GHz, compared to 60 dB for conventional types, thereby making the TSS510-HF suitable for use in FPCs in the high-frequency band. Moreover, its exceptional bendibility offers FPC design engineers unlimited freedom in the shaping of flexible electronic devices.
Evaluation samples of LIOELM TSS510-HF are now available. The TSS510-HF and other advanced electronic solutions from Toyochem will be showcased at DesignCon 2020 from January 28 to 30, in Santa Clara, CA, USA.
Suggested Items
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?