Reading time ( words)
IPTE, one of the world’s leading suppliers of automated production equipment for the electronics and mechanics industry, again participates at the common booth “Future Packaging” at SMTconnect in Nuremberg (May 5−7). The common booth “Future Packaging” is located in hall 5, booth 434. The line at SMTconnect 2020 gives an opportunity to get a full and meaningful overview to really anticipate market trends and find the right people available on site to discuss constructive solutions to own challenges. Efficiency, robust processes and technology as well as a maximum of flexibility are in the main focus.
IPTE is supplying the depaneling system FlexRouter II, an automated test cell, a laser marker FlexMarker II, the EasyTest Handler ETH and the Multi-Functional Test Handler MFT as well as some necessary conveying equipment from IPTE’s EasyLine to interconnect the large variety of other suppliers’ process equipment.
The IPTE Flex Router II and the automated test cell are integrated into IPTE’s new production cells. The new production cells are built on a modular and scalable basis. They show a huge crispness. Another part of the new design is the optimized layout inside the cells. This offers an increased user-friendliness and a better access to all parts of the machines. The handling of these production cells is even better for service and reequipping. Besides the standard processes like dispensing, milling and mounting, a lot of other functionalities can be built into the new IPTE cells.
IPTE FlexRouter II
The highly successful IPTE FlexRouter II, globally tried and tested in numerous applications offers flexible, cost-efficient and fully automated depaneling with milling and/or sawing. It aims especially to middle-sized to high volume production lots featuring a high variety of different PCB versions, these are the demanding high-mix depaneling tasks based on short machine set-up procedures. Despite the very small footprint (machine width is only one meter), boards with sizes of up to 330 mm x 500 mm (length x width) can be processed without difficulties. Four of the seven machine axes in total are integrated as extremely precise linear drives of latest technology.
IPTE FlexMarker II
The FlexMarker II is an even more efficient successor to the much proven laser-marking system FlexMarker. A unique feature of this advanced machine is the integrated electrical flip unit with PCB thickness compensation (option) so the work piece can be laser-marked on both surfaces. This automated compensation results in an always-in-focus laser beam – independent of the PCB thickness. A board warpage correction is being offered as an option as well. Flipping of the PCB is done without prior moving the laser to a secured area, resulting in a handling time less than one second.
IPTE Easy Test Handler ETH
In-Circuit- or functional-test as well as programming processes can be inline automated with IPTE’s Easy Test Handler ETH. The ETH is practical for the use with single-circuit boards, multiple boards or corresponding carriers for circuit boards. Both, one- or double-sided fixtures can be realized. The fixtures can be changed quickly and easily. For optional parallel use of more than one test handler, the test handler can be equipped with a bypass-segment. This allows a constant production process, which is not interrupted by the testing process. Moreover, the bypass can be used to optimize the cycle time.
IPTE will show a live system to program/flash the processor on board.
IPTE Multi-Functional Test Handler MFT
The Multi-Functional Test Handler MFT is a handler for performing in-circuit tests and functional tests on PCBs that are routed through the handler on transport belts. The most important benefit is its concept: The modular design of the MFT offers multi-functional possibilities for test handling.
The EasyLine program for board-handling of PCBs or ceramic substrate (Hybrid-) boards can be easily integrated into production lines and production processes. EasyLine modules are available in the transport sizes small (300 mm), medium (500 mm) or large (600 mm).
Autonomous Test Cell
The autonomous test cell is setup to unload PCBs from magazines, transport them to a test cell and to return them to either the “pass” or “fail” magazine depending on the test status. Magazines are exchanged by using IPTE’s AIV to unload/load magazines to the MLL/MLU 3P.