Royal Flex Circuits Supports the Production of Ventilators for Medtronic
March 25, 2020 | Royal Flex CircuitsEstimated reading time: 1 minute
Companies across the nation are ramping up their production lines to increase the ventilator capacity in the United States and around the world. But not all companies are qualified to perform the work. Only a fraction of the approximately 100 PCB manufacturing companies in the United States is capable of quickly fabricating and assembling the necessary circuit boards.
Royal Flex Circuits, in Santa Fe Springs, California is uniquely positioned to help out in the crisis. Its new production facility, less than a year old, features the latest machinery, hardware, and production methods. The company has an inventory of copper-clad cores and prepreg, allowing it to start production as soon as the design files arrived from ventilator manufacturers.
Victor Hemingway, President of Royal Flex Circuits, said, “We have been producing circuit boards for Medtronic ventilators for over 10 years. We have extended production hours and now have two shifts of engineers and production-line employees making the circuit boards that control ventilators. Our employees are putting in long hours, but we are so proud to be helping in this time of great need.”
Throughout the COVID-19 epidemic, as many as “960,000 Americans will require ventilatory support” (US Resource Availability for COVID-19, Society of Critical Care Medicine, March 2020). A survey in 2009 identified approximately 160,000 ventilators in hospitals with another 12,700 in the Strategic National Stockpile (Worst -Case Estimates for US Coronovirus Deaths, New York Times, March 13, 2020). The large disparity between those two numbers means that potentially hundreds of thousands of Americans will not have the medical resources they need.
Royal Flex Circuits manufactures rigid, rigid-flex, and flexible printed circuits. “Fabricating and assembling flexible printed circuit boards is a very complex process that requires a fair amount of materials, a lot of labor and great attention to detail,” said Hemingway. “But done correctly, the net result is a product that helps saves lives.”
Suggested Items
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources:
Matrix to Exhibit at IPC APEX EXPO 2024 in Anaheim, CA
03/05/2024 | MatrixMatrix will be exhibiting at IPC APEX EXPO 2024, to be held on April 9-12, 2024, at the Anaheim Convention Center, Anaheim, CA.
The Chemical Connection: Getting to Know Your Vendor
02/16/2024 | Don Ball -- Column: The Chemical ConnectionAfter working for a capital equipment supplier for almost 50 years, I’ve found that the most important part of getting to know your vendor is good communication among all parties. While contact between fabricators of a constantly changing product line and the designers of those products may occur daily or weekly, conversations between you and your equipment supplier may be years apart. That lengthy gap often means that previous contacts may have been promoted, retired, or moved on to other opportunities. You may have also migrated to a new supplier with whom you have little or no history. In either case, you will be interacting with someone you are unfamiliar with (as they are with you). Therefore, it is essential for both sides to communicate clearly so expectations will align.
EIPC Winter Conference 2024, Day 2: A Closer Look at Global Trends
02/14/2024 | Pete Starkey, I-Connect007The opening session of the second day’s conference proceedings focused on global PCB trends and was introduced and moderated by Dr. Michele Stampanoni, vice president of strategic sales and business development at Cicor Group in Switzerland. He opened the session with Dr. Hayao Nakahara’s knowledgeable and enlightening video presentation on the IC substrates industry.
EIPC Winter Conference 2024, Day 1: A Grab-bag of Technical Topics
02/12/2024 | Pete Starkey, I-Connect007The 2024 Winter Conference of the EIPC took place January 30 and 31 at the IHK Academie in Villingen-Schwenningen, Germany. The keynote session will be reported separately. Here is my review of the first day’s conference proceedings.