I-Connect Editor’s Choice: Five Must-Reads for the Week


Reading time ( words)

What a difference a year makes. A year ago, I was getting ready to be on the road for two weeks covering back-to-back trade shows: DesignCon and IPC APEX EXPO. Around this time last year, I was wondering if I could make that trip with just a carry-on. (I did. I may never use a big suitcase again.)

In February, the whole world stopped because of COVID-19. We were all forced to come up with new ways to do our jobs, and the professionals in the PCB industry proved to be among the most creative at adapting to a changing landscape.

I interviewed dozens of manufacturing managers and owners who basically started over—revamping workstations, building in social distancing inside small facilities where it didn’t seem possible, and sanitizing their shops every hour, on the hour. Many of these managers then donated thousands of PCBs for ventilators in the fight against COVID-19.

Call me an optimist, but I have high hopes of being airborne again in 2021, hopefully to an industry trade show such as DesignCon in April or PCB East in May, which are slated to be in-person events as of this writing. Let’s hold a good thought. A few promising vaccines have been rolled out, and things are looking up for 2021.

We always hear that the PCB industry is “mature,” full of people past their prime who don’t know how to change with the times. I think 2020 puts the lie to that idea. I’m honored to be a journalist covering such an amazing group of people.

In the words of U2, “I will begin again.” Happy New Year!

Happy Holden Discusses His Favorite Career Moment
Published December 30

We’re fortunate to have co-workers like Happy Holden, a true pioneer in HDI and manufacturing process automation. But when we asked Happy to name his favorite career moment, he didn’t dwell on technology. In this video interview, Happy fondly recalls a time when his children went fishing on David Packard’s giant ranch, and Packard cleaned the kids’ fish for them, not long after he served as deputy secretary of defense under Richard Nixon. Someone has to clean the fish!

EIPC Technical Snapshot: PCB Surface Finishes
Published December 28

Some of you have mentioned that you feel “webinarred out” after viewing online industry events for most of the past year. If that’s the case, don’t despair: Technical Editor Pete Starkey is attending many of these online events and reviewing them for our magazines. Pete’s review of this EIPC Technical Snapshot webinar on surface finishes was one of the most popular articles of this past week.

Just Ask Heidi: Is Power Integrity the Hot Discipline of the Future?
Published December 28

Our “Just Ask” series has been a popular one this year—another lucky by-product of this crazy year. (“Everyone is at home on their computer now; I bet they have some questions they’d like answered.”) I had interviewed Heidi Barnes of Keysight Technologies when she was a panelist at AltiumLive, and I knew that she’d be a great source for questions about signal and power integrity. Also, I’d never met anyone who had won NASA’s Silver Snoopy award. Here, Heidi discusses which EE disciplines might be the most in demand in the future.

Book Excerpt: The Printed Circuit Assembler’s Guide to Smart Data, Chapter 1
Published December 30

The I-Connect007 eBooks have proven to be popular, covering PCB design, fabrication, assembly, and much more. This excerpt from Chapter 1 of “The Printed Circuit Assembler’s Guide to Smart Data,” written by Sagi Reuven and Zac Elliott of Siemens Digital Industries Software, is one of the most-read articles during the week after Christmas.

Millennials and Seasoned Veterans: Your Future Lies in Both
Published December 29

This article by columnist Dan Beaulieu drew a lot of eyeballs this week. Yes, as his title says, this industry is slowly becoming a mix of young technologists and the “graybeards,” though we folks of a certain age seem to have a numerical advantage over the youngsters for the moment. But Dan makes a great point: We can learn from each other. Sure, the new grads should learn all they can from the senior people looking toward retirement. But the young people have a totally different point of view, and we’d be wrong not to listen to them.

Share




Suggested Items

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

04/08/2022 | Andy Shaughnessy, Design007 Magazine
Spring has definitely sprung, and the trade show season continues to roll right along. Managing Editor Nolan Johnson just returned from DesignCon 2022, and as he says in his review, the attendance was up from last year’s event, which had been at the McEnery Convention Center in the waning days of the pandemic. I hope we’re getting back to normal, whatever that means. This week, we have a few articles about Industry 4.0, as well as a column on setting your priorities. We have a cool article about methods for measuring the breakdown of resins during multiple thermal laminations, and a conversation with an EMS company president who realized that he was actually running a data collection firm that happened to make circuit boards. Can you say the same about your own company?

DesignCon 2022: Back to Business as Usual

04/07/2022 | Nolan Johnson, I-Connect007
It was something of a homecoming as DesignCon returned to the Santa Clara Convention Center this week for DesignCon 2022. It’s been two years since the last DesignCon was held in this venue just before the pandemic began. I attended DesignCon 2021 at the San Jose McEnery Convention Center in July of last year, and I could see a big improvement in attendance as DesignCon moved back into its usual venue.

Setting Goals for Your PCB Design Education

03/30/2022 | Andy Shaughnessy, Design007 Magazine
For our March issue of Design007 Magazine on planning your design education, we spoke with Bill Brooks of Nordson ASYMTEK, a long-time PCB designer, CID instructor, and fantastic sculptor. He is also one of the first to ever teach standalone PCB design courses in a college. After he earned his certification to teach the IPC CID workshops, Bill served as an adjunct instructor at Palomar College near San Diego, teaching beginning and advanced PCB design classes for 10 years. I asked Bill to share his thoughts on setting up a PCB design education career plan, and the need to stay on top of your game as a PCB designer.



Copyright © 2022 I-Connect007. All rights reserved.