Arlon EMD Completes IPC Validation Recertification Audit


Reading time ( words)

Arlon Electronic Materials has successfully completed an intensive two-day recertification audit by IPC Validation Services. This audit was focused on validating Arlon’s manufacturing processes and testing procedures.  Arlon’s success in passing IPC Validation Services’ audit confirmed Arlon’s status in the electronics industry as a trusted manufacturer of high-performance laminate and prepreg products.

“Arlon is fully committed to providing the highest quality, most thermally robust polyimide laminate and prepreg products on the market. Successfully completing the audit of our facility by IPC Validation Services provides our customers with the added assurance of our commitment to consistency and quality in manufacturing.”  stated John Wright, Arlon’s Quality Manager,

All of Arlon’s polyimide laminate and prepreg products are currently listed on the IPC Validation Services QualifiedProducts List (QPL). These include Arlon 33N, 35N, 84N, 85N, and 85HP which are certified to the requirements of IPC-4101E-WAM1 slash sheets 40 and 41.  Additionally, Arlon’s 37N and 38N low flow polyimide prepregs are certified to the requirements of slash sheet 42.

About Arlon: Arlon EMD is a US manufacturer of specialty materials.  Arlon has supplied materials for the North American, UK, European, Israeli and Asian markets for more than 35 years from their manufacturing location in Rancho Cucamonga, California.

For additional information, please visit our website at www.arlonemd.com.

Share

Print


Suggested Items

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

11/26/2021 | Nolan Johnson, I-Connect007
If you’re in the United States like I am, and if you celebrated with a traditional Thanksgiving dinner, like my family did, then you just might have fallen asleep sitting up in a chair (or in my case, stretched out on the couch) and missed some of the highlights in the news this week. Never fear, I woke up early to bring the top five news items you should know for this week. We have industry bookings and sales news from IPC, some news from the flex sector, an explanation of induction lamination from Happy Holden, and two different takes on “sustainability.”

New Methods for Quantifying PCB Design Weaknesses and Manufacturing Challenges

11/18/2021 | Nolan Johnson, I-Connect007
Gerry Partida explains, "The industry is at a new point in evolving how we look at building boards. Our industry has historically built boards and then tried to find a test for them. Then, when they found a test for it, they figured out that it needed to be analyzed before they built the board. We did this with electrical test. We built boards and down the road, as people started asking, “Why am I buying bad boards? We should electrically test them,” electrical test was introduced, reluctantly, into the test part of manufacturing printed circuit boards by suppliers or fabricators. Then they embraced it. But when we started testing boards, we did comparison tests."

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

04/30/2021 | Nolan Johnson, I-Connect007
This week’s biggest news came in the form of industry briefings—there were a lot of them and the news was universally positive. The news you need to read for this week includes three reports from IPC detailing: the strength and risks in the global economic recovery; a strong EMS book-to-bill ratio; and strong North American PCB sales. Zeroing in on a single company, Apple reported a significant jump in revenue.



Copyright © 2021 I-Connect007. All rights reserved.