ILFA Invests in the Expansion of its PCB Lamination Capacities


Reading time ( words)

During the LAUFFER Technology Days, ILFA Managing Director Thomas Michels and LAUFFER Managing Director Christof Lauffer announce a close cooperation, which is sealed with a joint letter of intent. The new investment project, which is part of ILFA's modernisation offensive, is aimed at a highly automated lamination centre that will sustainably support PCB production at ILFA's Hanover site.

With the planned new investment from LAUFFER, ILFA GmbH will triple its production capacity in the lamination area. At a cost of more than EUR 1.3 million, the laminating centre would be the largest single investment to date in the company's 43-year history. The modernisation offensive at ILFA provides for total investments in the higher double-digit million range. In addition to increased automation, numerous new acquisitions are currently being made in the areas of OFT (surface technology) and FLT (photo and lacquer technology). These include a new DES line, solder resist developers, micro etching and a new plasma system.

Thomas Michels explains: "On the one hand, we want to grow technologically, but on the other hand, we also want to significantly expand our production capacities. In this way, we will consolidate our position in the market and further establish ourselves in the field of rigid-flex printed circuit boards, RF and power technology as well as in the process-safe processing of the finest structures. We are pleased to have gained LAUFFER as a partner who will support us with its many years of expertise."

The projected RMV 125/6 LAUFFER lamination centre is characterised above all by a high degree of automation and very high energy efficiency during the lamination process. Thanks to the unique design concept with large storage capacities, which was specially adapted to ILFA's requirements, the laminating system can be operated fully automatically even during night shifts or so-called ghost shifts. Another innovation is the operation of the system with newly designed heat accumulators for heat recovery during press operation. These enable energy saving effects of up to 30% depending on the operating mode of the entire system. "We are pleased to be able to realise this project together with ILFA. We see this as an important signal for the European PCB industry and especially for the domestic market in Germany," says Christof Lauffer about the jointly planned project.

Share




Suggested Items

Taiyo’s Brian Wojtkiewicz Discusses Flex, HDI and More

10/25/2022 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with Brian Wojtkiewicz at PCB West about Taiyo’s latest developments in solder mask technology. They discussed the company’s advances in flexible circuits, HDI, and much more. In particular, Brian discusses the importance of reliability in fabrication and assembly. "We’re always in the fabricators’ shops. I’m out in the field talking to them, helping the operators understand the process, and making things work better because then we don’t have issues down the road," he says.

Michael Carano: A Focus on Process Control, Part 2

09/28/2022 | I-Connect007 Editorial Team
In this second half of our conversation, Michael Carano discusses some of the metrics that fabricators need to consider before investing in new processes, especially process control technologies, and some of the challenges board shops face updating brownfield sites.

EIPC Technical Snapshot: Novel Laser-based Manufacturing Processes in Automotive Electronics

09/22/2022 | Pete Starkey, I-Connect007
“Summer is over, now it's back to work!” This was the opening line of the invitation to the 18th EIPC Technical Snapshot webinar, Sept. 14, following the theme of advances in automotive electronics technology, introduced and moderated by EIPC President Alun Morgan. The first presentation, entitled "The fully printed smart component—combining additive manufacturing and sensor printing," came from Jonas Mertin, a thin-film processing specialist at the Fraunhofer Institute for Laser Technology.



Copyright © 2022 I-Connect007 | IPC Publishing Group Inc. All rights reserved.