ESI Supplies Model 5335 Laser Processing System to PFC


Reading time ( words)

Electro Scientific Industries, Inc., an innovator in laser-based manufacturing solutions for the micro-machining industry, today announced that PFC Flexible Circuits Limited has selected the Model 5335 Laser Processing System to expand its high density interconnect (HDI) flexible circuit manufacturing capabilities. Based in Scarborough, Ont., Canada, PFC is a North American leader in flexible circuit design, manufacture and assembly.

“PFC has been supplying fine line technology for the past eight years. Now, with the addition of the Model 5335, we can support true HDI flex technologies,” said Steve Kelly, President of PFC Flexible Circuits. “This laser processing system from ESI will allow us to make smaller vias, blind and buried vias, and to cut smaller features in HDI circuits. We’re seeing strong market interest in HDI across multiple industries ranging from consumer and medical devices to military and aerospace.”

PFC chose the ESI Model 5335 in part because of its high throughput capabilities compared to alternatives. For example, the ESI Model 5335 can drill 50 micron blind vias at a rate of 32,000 holes per minute. This performance is made possible by Third Dynamics™, a patented high-speed beam positioning technology that enables fast and accurate routing and drilling of flexible circuits.

“We were looking to update our drilling technology without losing throughput,” said Anish Somaiya, Vice President, PFC Flexible Circuits. “The Model 5335 not only will significantly increase our drilling throughput and give us a technological edge over many of our competitors but also will save floor space in our drilling area.”

The ESI Model 53XX family is widely regarded as the industry standard for laser processing across the flexible circuit and interconnect industry. Over 1,200 ESI laser processing systems are installed worldwide and are in use at nine of the top 10 flex circuit manufacturers. These systems offer industry-leading drill, routing, patterning, and skiving performance.

“We are extremely pleased that PFC has decided to incorporate ESI laser processing technology into its HDI and flexible circuit manufacturing processes,” said Ed Grady, CEO of ESI. “We look forward to being a part of PFC’s long-term success and helping them meet their most challenging customer demands.”

About PFC

PFC Flexible Circuits designs, manufactures and assembles flexible printed circuits, all under one roof. Circuit types include single- and double-sided, multi-layer and rigid flex. PFC can provide 50 micron line and space in production and assemble circuits using 1005 components. Specialties include high-speed low-loss, impedance-controlled circuits. PFC offers a large library of UL approved materials and is ISO 9001 and 13485 approved. For more information go to: www.pfcflex.com.

About ESI

ESI's integrated solutions allow industrial designers and process engineers to control the power of laser light to transform materials in ways that differentiate their consumer electronics, wearable devices, semiconductor circuits and high-precision components for market advantage. ESI's laser-based manufacturing solutions feature the micro-machining industry's highest precision and speed, and target the lowest total cost of ownership. ESI is headquartered in Portland, Ore., with global operations from the Pacific Northwest to the Pacific Rim. More information is available at www.esi.com.

Share




Suggested Items

Understanding the UHDI Market

11/28/2022 | I-Connect007 Editorial Team
The more we investigate UHDI in the current market, the more advanced packaging becomes a part of the conversation. Yet there are so many questions to be answered. The I-Connect007 Editorial Team met with Calumet’s Todd Brassard and Meredith LaBeau recently to get answers to these questions and find out where the UHDI market is headed.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

10/14/2022 | Nolan Johnson, I-Connect007
I’ve been in Washington, D.C., most of this week, attending and reporting on the IPC Advanced Packaging Symposium. You’ll see more content from me in the weeks and months to come as I sort through and highlight the varied aspects of this ground-breaking event. If you’re in this industry, advanced packaging will affect you, make no mistake about it.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

10/07/2022 | Andy Shaughnessy, Design007 Magazine
It’s been a busy week for I-Connect007. Managing Editor Nolan Johnson and I covered PCB West at the Santa Clara Convention Center, and, as you’ll see in my article below the place was packed. We have an article about SMTA International, scheduled for the end of October. I think the trade show season is looking good into 2023. People are done with COVID shutdowns and ready to get back to live trade shows and conferences. We’ll be in Minneapolis to bring you the latest news and technical information. We also have a news report about the European Union committing to craft its own version of America’s CHIPS Act. There’s a great interview with Dana Korf and John Strubbe about the latest innovations in materials at TUC. And columnist Paige Fiet explains why she is committed to making manufacturing “cool” again to help recruit and retain young technologists.



Copyright © 2022 I-Connect007 | IPC Publishing Group Inc. All rights reserved.