Atotech Increases Equipment Manufacturing Capacity with New Facility in China


Reading time ( words)

Atotech, a global leader in specialty plating chemicals, equipment and services today announced the inauguration of its second equipment manufacturing facility in Guangzhou, China to meet the growing demand for its plating equipment. Globally this is Atotech's third facility dedicated to manufacturing production equipment for the electronics industry. The plant, built on an area of 63,000 sqm leaving space for further expansion and will generate close to 200 local jobs over the next three years. State-of-the-art machines and processes have been deployed to ensure greater precision, accuracy and efficiency in the production of next generation PCB, IC Substrate and Semiconductor manufacturing equipment. 

atotech...JPGCommenting on the development, Mr. Reinhard Schneider, President of Atotech said: "The opening of this facility in Guangzhou marks a new milestone for Atotech and our commitment to China. The new plant is a direct response to our customers' trust in our pioneering technology and sharply rising demand for our manufacturing equipment. In-line with our corporate priority, the facility meets latest technology and quality standards, as well as rigorous sustainability norms."   Atotech is an unrivaled supplier to the PCB and IC Substrate industries backed with over two decades of experience, a strong focus on R&D and cost-optimized manufacturing. The company's flagship brands Uniplate and Horizon are marketleading horizontal systems serving the global leaders in PCB and IC Substrate manufacturing. The Uniplate systems provide production solutions for desmear, through hole metallization and electrolytic copper processing and the Horizon systems production solutions for final finishing using immersion tin, and for surface treatment e.g. bonding enhancement and permanent non-etching adhesion processes. Both brands have been driving Atotech's success for several years now.  

Phase 1 of the new investment (33 M USD) will ramp up the production capacity of Uniplate and Horizon, as well as the newly introduced local platform for manufacturing equipment. Phase 2 will further expand the production capacity of the facility to include semiconductor equipment part manufacture and assembly to serve the increasing demand for new advanced packaging production solutions. 

With the new facility Atotech aims to react faster to the rapidly changing and highly demanding markets and cater to individual customers’ demands.  

The new facility will effectively support Atotech's customers' next generation manufacturing programs. Furthermore, it will contribute significantly to the local economy and its development within the technology industry.  

About Atotech

Atotech is one of the world’s leading manufacturers of specialty plating chemicals and equipment for the printed circuit board, IC-substrate and semiconductor industries, as well as for the decorative and functional surface finishing industries. Atotech has annual sales of 1.3 billion USD and is fully committed to sustainability – we develop technologies to minimize waste and to reduce environmental impact. Atotech is a division of the Total Group, and has its headquarters in Berlin, Germany. The company employs around 4,100 people in more than 40 countries. 

 Press Contact: Atotech Headquarters Atotech Deutschland GmbH Smriti Dave Erasmusstr. 20 D-10553 Berlin Phone +49 30-349 85-978 Fax +49 30-349 85-670 Email: smriti.dave@atotech.com   

Share




Suggested Items

Plating on Silver: What’s Old is New Again

07/07/2022 | Denis Jacques, Technic Inc.
About three decades ago, immersion silver, a nitrate-based process, gained a lot of market share in the world of PCB final finishes. More economical than ENIG, flat, solderable, and conductive, it had everything going for it—everything but corrosion resistance in a harsh environment, that is. Champagne voids were also an issue, along with line reduction. But the worst drawback, the characteristic that made the part short over time, was creep corrosion. A build-up of copper sulfide salt that grows in contact with a sulfur-rich environment, heat, and moisture resulted in failures in the field. This was enough to scar the process for good.

EIPC Summer Conference 2022: Day 2 Review

06/29/2022 | Pete Starkey, I-Connect007
Örebro, Sweden on June 15 brought a bright and early start to Day 2 of the EIPC Summer Conference for those who had enjoyed the previous evening’s networking dinner, but had resisted the temptation to over-indulge or to carry on their long-awaited catch-up conversations with old friends into the small hours. All but a few were in their seats for 9 a.m., awake and attentive for Session 4 of the conference, on the theme of new process technologies, moderated by Martyn Gaudion, CEO of Polar Instruments.

EIPC Summer Conference 2022: Day 1 Review

06/28/2022 | Pete Starkey, I-Connect007
At last, a live EIPC conference and this time in the Swedish city of Örebro, “where history and contemporary culture converge,” a pleasant and convenient location for an event that included a privileged visit to the Ericsson facility in Kumla. Around 100 delegates made the journey and the Örebro Scandic Grand Hotel was an excellent conference venue for the June 14-15 conference.



Copyright © 2022 I-Connect007. All rights reserved.