All About Flex: Lean Manufacturing and NPIP for Flexible Circuits


Reading time ( words)

Many companies are familiar with lean manufacturing concepts and have successfully used these techniques to improve manufacturing processes. Lean techniques, while most often used in printed circuit fabrication and assembly operations, can also be applied to nonmanufacturing processes. One such process is new part number introduction (NPIP).

The main thrust of lean manufacturing is to eliminate or reduce waste. There are typically seven wastes (mudas), as defined by Toyota executive Taiicho Ohno, when he developed Toyota’s Production System (TPS)[1]. (“Muda” is a Japanese word meaning uselessness, idleness or other synonyms of waste.)  The seven mudas are:

  • Transport
  • Inventory
  • Motion
  • Waiting
  • Over-processing
  • Over-production
  • Defects

The typical part number startup for flexible circuits often can suffer from a number of those wastes. Certain waste items are specific to a part number (customer out of office, conflicts in documentation, iterative design conversations, etc.) or be ingrained as accepted gaps in a supplier’s product launch system. As part of a continuous improvement mentality, wastes should be identified for reduction through a documented and monitored part number introduction process.  Some of the more common waste elements are:

Transport: In a new part number introduction process (NPIP), transport is the movement of documentation (electronic or paper) from one department to another requiring successive reviews and sign-offs. Excess transport is a symptom of a departmentalized approach to part number start-up rather than a process flow approach. A cross-functional design review team with one leader can remove departmental barriers and help assure that reviews and inputs are done in parallel rather than serially. Transport can also include sending information requests and approvals to customers and suppliers. These requests need to be challenged regarding their usefulness and necessity.

Read the full article here.

 

Editor's Note: This article originally appeared in the March 2016 issue of The PCB Magazine.

Share

Print


Suggested Items

This Month in PCB007 Magazine: Blue Box—Leading a Cleaning Revolution

08/19/2020 | I-Connect007 Editorial Team
Jim Metropoulos, CEO and founder of Blue Box, talks about the innovative foam solution he developed to clean the coils of HVAC systems in large facilities, ranging from casinos and manufacturing plants to some of the top hospitals in the country.

Cyberattack! Think It Couldn’t Happen To You? Think Again!

07/15/2020 | Barry Matties, I-Connect007
Eric Cormier and Dave Ryder of Prototron address the ransomware attack that locked them out of their system last December, bringing business to a screeching halt and forcing them into the arduous process of a full rebuild. With things finally starting to normalize, Eric and Dave now offer precautionary advice they’ve accumulated over the past six months.

2020 EIPC Winter Conference, Day 2

03/10/2020 | Pete Starkey, I-Connect007
Rested and refreshed, delegates returned to the conference room for the second day of the 2020 EIPC Winter Conference in Blijdorp, Rotterdam, South Holland. Pete Starkey provides an overview of the presentations and activities from Day 2.



Copyright © 2020 I-Connect007. All rights reserved.