The Newest Flex Shop in the U.S.


Reading time ( words)

I-Connect007 sales team member Angela Alexander and I recently got a tour of Lenthor’s new Silicon Valley flex board shop and then sat down with President and CEO Mark Lencioni to discuss the new flex facility, the markets, management, and the future.


 

Barry Matties: Mark, give our readers a little background on Lenthor Engineering and what you do.

Mark Lencioni: We are entering our 31st year of business; having been founded in 1985. We are now located in our brand new, 55,000 sq. ft. state-of-the-art facility dedicated specifically to the fabrication and assembly of flex and rigid-flex products. We made it as “Lean” as possible for all our manufacturing systems to be very close to each other, in order to get the most efficiencies with our employees and product movement. It came out just like we planned.

Matties: So is Lenthor a flex shop primarily?

Lencioni: Yes, we specialize in flex circuit fabrication and assembly. We specialize in multilayer and rigid-flex technology, very high aspect ratios, high layer counts, and the technology to allow packaging to get into the size and shape it needs to be. We have succeeded by satisfying the toughest demands from the most demanding customers in the world.

lenthorfactory-crop.jpg

 

Matties: Flex is still one of the fastest growing areas in the marketplace.

Lencioni: Yes, our customers’ products are the largest they will ever be and flex circuits are a natural solution to help people package things in the size and shape they need to be. They're getting smaller and smaller. From wearable devices, to cellphones, to any kind of mechanical device, automotive, military equipment, and some semiconductor equipment processing.

Matties: In your 30+ years, what's the most surprising thing you have seen in the flex market?

Lencioni: I would say the growth in both medical and military. We didn't really appreciate the opportunity these markets held for us until we did some specific market research after 9/11. The results of that research are what led us to move more heavily into these markets. If you look at the world and the environment we are in, these marketplaces are poised to be well-established for many, many years to come.

Lenthor_Hallway.jpgMatties: Your facility is an ITAR facility; what's the percentage of work that you bring through here?

Lencioni: We are about 55% military, 25% medical, and the rest balances across industrial and telecom.

Matties: Where do you see the largest growth coming from right now?

Lencioni: Military and Medical. Military obviously is in a very stable environment because it doesn't go offshore. We are finding growth from within a market that we are already well positioned to support. The medical market is also very favorable for us.  We have developed the kind of process validation and control that market insists on.

Matties: Going back to your new facility, who laid out the facility?

Lencioni: It was a combination of Rich Clemente and myself. We took the processes, and with help from engineers regarding where they needed to be, we just started to lay it out. We did that with an architect, and so whatever building we decided to go into we just took that footprint and laid it right in.

Matties: When you are laying out a facility like this, what's the goal?

Lencioni: The goals were product efficiency and people movement. To really make sure that the product started finished within the most efficient process path, minimizing as best we could the movement and handling of materials.

Matties: When we first started the tour we talked about your old facility and the length of that process.

Lencioni: Yes, we had a campus environment previous to this which included three separate buildings. Although they were across the parking lot from each other, the movement of materials from beginning to end was about 2.2 miles. We re-validated what it is in our new factory and depending on product type the movement is down to about one eighth of a mile. The product moves with more efficiency, it doesn't get mishandled, and the employees are able to stay focused on their job of producing boards instead of moving materials.

Share




Suggested Items

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

06/03/2022 | Andy Shaughnessy, Design007 Magazine
Things are heating up in the world of PCB design and manufacturing as well. In the past week, we published quite a bit of news—some good, some not so good. Some of the news is mixed, as we see with the EMS industry shipments rising YOY in April, but falling from the previous month. It’s nice to see NASA investing in American small businesses, but they didn’t really have a choice, did they?

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

03/04/2022 | Nolan Johnson, I-Connect007
In the news this week we found a synchrony of topics. Much of the world is aware of the speaking points from U.S. President Joe Biden’s State of the Union address this past Tuesday. In that speech, President Biden talked prominently about U.S. legislation in process to bring more technology manufacturing back to the states. In fact, Intel CEO Pat Gelsinger was not only an invited guest, but was referred to directly in the speech as a positive example. I can only assume that President Biden meant that moment to be a motivator for other CEOs in the industry.

EIPC Technical Snapshot: Considering Supply Chain and Defense

01/25/2022 | Pete Starkey, I-Connect007
Continuing the highly successful series of EIPC’s Technical Snapshots, and featuring a programme that attracted a record attendance, the 14th online event was held on January 19. The opening presentation came from the ever-cheerful Didrik Bech, of Elmatica, who promised to provide thoughts and ideas about how to secure the supply chain to ensure compliance, not only to reduce the risks but also to increase the opportunities. Stan Heltzel from ESA Materials and Processes Section in the Netherlands gave a fascinating detailed insight into ESA’s approach to microvia reliability. And Liisa Hakola, senior scientist and project manager at the VTT Technical Research Centre of Finland gave the final presentation on how sustainability creates new opportunities for electronics industry.



Copyright © 2022 I-Connect007. All rights reserved.