I-Connect007 Editor’s Choice: Five Must-Reads for the Week
Like a bad penny, COVID-19 just keeps coming back and affecting the PCB industry. This week, we saw more industry events going fully virtual—a trend that’s likely to continue. But as Chris Mitchell explains, the COVID-19 outbreak is also forcing lawmakers and organizations to work together for the good of the U.S. electronics supply chain. Sometimes, it takes a crisis to make everyone cooperate, so let’s celebrate these little victories.
Just Ask Happy: Ranking the Top Countries by Fab Technology and Production
We asked for you to send in your questions for Happy Holden, and you took us up on it! The questions you've posed run the gamut, covering technology, the worldwide fab market, and everything in between. Enjoy.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
The common theme in this week’s Top 5 editor’s picks is “change.” We’re talking change in the form of forwarding process, achieving milestones, evolving, and improving metrics. This week’s picks are not only newsworthy but also captured reader attention based on metrics. If you haven’t read any other news items from the industry this week, I propose these five must-reads.
Nano Dimension Appoints LM Instruments to Market PCB/Hi-PEDs 3D-Printers
Nano Dimension Ltd., a leading Additively Manufactured Electronics (AME)/PE (Printed Electronics) provider, has signed an agreement with LM Instruments, which will represent Nano Dimension in the Mid-Atlantic States by marketing its 3D-Fabrication Machines for High-Performance Electronic Devices (Hi-PEDs).
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
The USMCA trade agreement was just the tip of the iceberg in news affecting our industry this week. We also saw more young people getting involved in the industry, an HDP User Group webinar on automotive thermal issues, and more questions for our own Happy Holden—this time, on stacked microvia reliability, or the lack thereof.
IPC: Shawn DuBravac and Chris Mitchell on USMCA
On July 1, 2020, the USMCA trade act (United States-Mexico-Canada Act) phased in as a trade agreement guiding economic trade and growth in North America. Nolan Johnson spoke with both Shawn DuBravac, IPC’s chief economist, and Chris Mitchell, IPC’s vice president of global government affairs and an I-Connect007 columnist, about the impact of USMCA on North American electronics manufacturing.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
Updates on trade shows, conferences, and associations dominated industry news this past week. Some events are returning to a physical venue; others are opting for a virtual version in 2020. Add to that a spate of cross-association cooperative agreements and new programs for career development coming from multiple associations, and you’ve delivered four of my top five picks.
Happy Holden Is Taking Your Questions Now
Happy Holden, the industry icon and “Father of HDI,” is ready to answer your questions! What have you always wanted to ask Happy, but never thought you'd have the chance? Now is your chance! Please take a few minutes to jot down your questions for Happy. A select group of answers will be published in upcoming editions of I-Connect007 magazines and newsletters.
Where The Jobs Are: The I-Connect007 Help Wanted Pages
If you’re looking for a career in the PCB industry—design, fabrication, or assembly—the I-Connect007 Career Opportunities section, jobconnect007.com, is the first place you should look. Right now, there are job openings for positions that span the entire circuit board supply chain, and you can submit your resume directly to the hiring managers by clicking on the ad.
The iNEMI 2019 Roadmap: Flexible Hybrid Electronics
The emerging trend for “electronics on everything, everything with electronics” was the theme of iNEMI’s webinar presentation of the highlights of its recently published Flexible Hybrid Electronics Roadmap Chapter, delivered by Girish Wable, senior engineering services manager with Jabil. Pete Starkey provides an overview.
SpaceX Manned Mission Promises More Success for Milaero and Electronics Manufacturing
On May 30, 2020, SpaceX became the first non-governmental organization to send human cargo into orbit and to a successful docking rendezvous with the International Space Station (ISS). On June 1, Nolan Johnson spoke with military/aerospace consultant and I-Connect007 columnist Mike Hill about the significance of this mission.
Flexible Circuit Technologies: ‘We Do it All’
During IPC APEX EXPO 2020 in San Diego, Carey Burkett, VP of Flexible Circuit Technologies, sat down for an interview with Dan Beaulieu. The two discussed the company’s expansive growth, the current flex and rigid-flex landscape, and FCT’s drive to provide complete solutions from rigid and flex circuits through box build.
DIS: It’s All About Alignment
Jesse Ziomek, VP of sales for DIS, updates Pete Starkey on the capability of the company to achieve ultimate accuracy in layer-to-layer registration, not just in rigid multilayers, but also in flex and rigid-flex builds. Jesse also comments on keeping technology exciting enough to attract young engineers into the industry.
Sheldahl: No Plans to Rest on Its Laurels
In this video interview from the show, Enid Kivuti, director of innovation and technology for Sheldahl, and Dan Beaulieu discuss the company's long history as industry pioneers, as well as how they're on the forefront of expanding and pushing the boundaries of flex technology.
This Month in SMT007 Magazine: Exclusive Interview With Burt Rutan, Aerospace Legend
If you follow advancements in aerospace technologies and expeditions, then you know the name Burt Rutan. Described by Newsweek as “the man responsible for more innovations in modern aviation than any living engineer,” Rutan is a bold visionary with a passion for the advancement of technology, who has designed 46 aircraft throughout his career. Following his IPC APEX EXPO keynote presentation, Rutan stopped by the I-Connect007 booth and shared his thoughts on a wide variety of topics.
IPC’s Dr. John Mitchell Commends U.S. Manufacturers and Governors
On March 31, Dr. John Mitchell, IPC president and CEO, gave Barry Matties an update on the industry response to COVID-19 since their conversation on March 20. Mitchell provides an overall update on the industry, commending U.S. manufacturers for their proactive responses.
With DIS, Accurate Registration is Everything
In this video interview from the show, Technical Editor Pete Starkey and Jesse Ziomek, VP of sales for DIS, discuss how the company achieves ultimate accuracy in layer-to-layer registration, not just in rigid multilayers, but also in flex and rigid-flex builds. Jesse also comments on keeping technology exciting enough to attract young engineers into the industry.
Dan Beaulieu: Adapting to New Methods at D.B. Management
In this audio interview, Nolan Johnson gets an update from Dan Beaulieu, a 40+ year veteran of the electronics manufacturing industry and an industry consultant for 25+ years. Dan shares an update on current business operations for D.B. Management, including how—like his clients—he may be at home, but it's still business as usual. Dan also offers his perspective on how our industry will weather and emerge from this challenging time.
IPC President and CEO Dr. John Mitchell: COVID-19 Global Industry Update
On March 20, Dr. John Mitchell, IPC president and CEO, spoke with I-Connect007 publisher Barry Matties in an exclusive phone interview with updates on COVID-19-related current events in the manufacturing industry. In this information-packed 14-minute audio interview, Dr. Mitchell shared key takeaways from Friday’s IPC Executive Forum conference call.
Show & Tell Feature: New Developments and Opportunities
“Elevate the Excellence of Electronics” was the theme for this year’s IPC APEX EXPO. As expected, the show set the bar high with technical sessions, professional development sessions, committee meetings, numerous networking opportunities, and an exhibitor list that included all aspects of the electronics supply chain. Columnist Tara Dunn explains how she repeatedly found herself interested in multiple sessions being hosted at the same time, and having to pick and choose which session to attend.
Catching up With Midstate Electronics
Dan Beaulieu recently sat down with Susan Matteo, Joan Allen, and Gerri Wooten from Midstate Electronics’ sales team to discuss their company, how long they have been in business, the key ingredients to their longevity and success, and how they see the market today in general. Midstate offers everything from multilayer PCBs to flex and rigid-flex circuits and PCB assembly.
IPC APEX EXPO 2020 Attendees Speak: Brian Wojtkiewicz
"It seems they are all pursuing digital imaging; whether it’s direct imaging exposure or inkjet solder mask, they’re all going that direction, and it’s not just the big customers; small customers are doing the same," said Taiyo's Brian Wojtkiewicz. "They’re investing money, which is good. New investment is what has been lacking for a couple of years."
Taiyo America Brings New Ideas to Solder Mask Development
During the show, Technical Editor Pete Starkey and Don Monn, Midwest regional sales director at Taiyo America, discuss the company’s progress with the establishment of inkjet solder mask as a production reality, now with OEM approvals. Monn also addresses the development of crack-resistant white solder mask and new screen-printable formulations with very high thermal conductivity.
Burkle North America: New Equipment and ‘New Blood’ in the Industry
During the show, Guest Editor Dick Crowe and Kurt Palmer, president and CEO of Burkle North America, discuss Kurt's career history and responsibilities in his present role. Palmer also details the equipment that the company is exhibiting on the show floor, and the palpable excitement that veteran technologists feel this year seeing younger engineers and students attending IPC APEX EXPO 2020. There’s a lot of “new blood” in the industry, as Palmer explains.
American Standard Circuits: Strong Focus on Military and Aerospace
During IPC APEX EXPO 2020, Joe Fjelstad speaks with Anaya Vardya, president and CEO of American Standard Circuits. In this interview, Anaya shares a variety of recent business updates. He also highlights the company's flex technology and I-Connect007 eBooks on flex and rigid-flex fundamentals, as well as RF and microwave PCBs.
‘A Night of Happy-ness’ and 2020 Good for the Industry Awards
The Horton Grand Hotel in San Diego was the site of “A Night of Happy-ness” on the evening of Monday, February 3, 2020. I-Connect007 transformed the Regal Ballroom into a cozy lecture hall with two key objectives: to award the I-Connect007 Good for the Industry awards, and to celebrate the life, achievements, and personality that is industry pioneer Happy Holden.
Kurt Palmer Takes on New Role as Burkle America President
During productronica 2019, Barry Matties chatted with Kurt Palmer about his new role as president of Burkle America, the work they do with Schmoll Maschinen, and why customers in North America must continue to invest to keep up with the technology and be profitable.
Flex Standards Update With Nick Koop
This month, I interviewed Nick Koop—director of flex technology at TTM Technologies, a veteran “flex guy” and instructor, and a leader of several IPC flex standards committees. Nick provides an update for the committees he’s involved with and discusses some of the challenges that he sees as more designers enter the world of flex.
Additive Electronics Conference Set for October 2019 Debut
Kelly Dack and Tara Dunn talk about the upcoming conference "Additive Electronics: PCB Scale to IC Scale" on October 24, 2019, hosted by SMTA in San Jose, California, and why it's an important event for people to attend—especially those involved in the design process.
Insulectro and DuPont Experts Talk Flex Design
I recently spoke with Insulectro’s Chris Hunrath and DuPont’s Steven Bowles at the DuPont Technology and Innovation Center in Sunnyvale, California. We discussed a variety of topics related to flex design, including the support structure that’s needed in flex design, the everchanging world of flex materials, and the need for working with a flex fabricator as early as possible in the flex design cycle.
Additive Electronics Conference Set for October 2019
Tara Dunn, president of Omni PCB and I-Connect007 columnist, and Lenora Clark, director of autonomous driving and safety technology at MacDermid Alpha Automotive, discuss what can be expected from the upcoming Additive Electronics Conference in San Jose, California, the impetus and motivation behind the conference, and who can benefit the most from attending.
Selecting the Proper Flex Coverlayer Material
Coverlayers are polymer materials used to cover and protect the copper traces of the flex circuit product. There are a number of different options available for protecting the circuits, and they serve different design requirements in terms of cost, performance, and flexural endurance optimization. When specifying the choice, it is critical to call out not just the type of coverlayer material but also the thickness requirement. This can be very important in certain types of constructions, especially when a flex circuit will experience dynamic flexing during use.
Mentor Tools: Optimized for Flex and Rigid-flex Design
With the launch of the new Flex007 section in Design007 Magazine, we asked David Wiens, product marketing manager with Mentor, a Siemens Business, to tell us about their tools’ flex and rigid-flex design capabilities. As David explains, today’s higher-end design software tools are optimized for flex design, making workarounds a thing of the past.
26 Meters of Flex!
Barry Matties spoke with Philip Johnston, managing director of Trackwise Designs, about the company’s patented length-unlimited multilayer printed circuits aimed at replacing conventional wire harnesses. Originally created for the aerospace industry, Trackwise has since seen growing interest from a number of different industries. Jake Kelly, managing director and chairman of Viking Test Ltd., also joined the conversation to discuss the importance of having a flexible equipment supplier when dealing with such a unique technology.
Crowded Congressional Calendar Affects Industry Priorities
More than five months remain in 2019, but U.S. congressional leaders are already running out of time as they face a long list of must-pass bills before year’s end. Although some of these bills do not affect the electronics industry, some of them do, and the overall agenda does affect the opportunities and risks we face.
AWE 2019: Go XR, Be Awesome
Dan Feinberg attended and covered the recent 2019 Augmented World Expo (AWE) and conference in Santa Clara, California. The event featured the latest developments and technologies in augmented (AR), mixed (MR), virtual (VR), and extended virtual reality (many just call it all XR to make it simple). Here's a wrap-up of the event.
What Electronics Companies Need to Know About Environmental Product Requirements
The task of monitoring and complying with environmental, health and safety (EHS) rules that affect electronics companies and their products requires a watchful eye on all levels of government: local, state, national, and international.
IPC’s PCB Tech Trends Study Highlights Issues Impacting Fabricators
The 2018 survey results indicated the need for speed and low loss as critical functions of the materials chosen. This is the digital age, and with the Internet of Things, virtual and augmented reality, vehicle-to-vehicle communication, etc., the need for low-loss and ultra-low-loss materials continues to grow as a percentage of circuit boards fabricated.
DuPont on Materials Challenges and New Opportunities
John Andresakis, senior marketing technologist in the Interconnect Solutions (ICS) Group of DuPont, and Jonathan Weldon, RF applications engineer also in ICS at DuPont, spoke with the I-Connect007 editorial team about trends the company is seeing, what challenges their customers are facing with materials today, and future opportunities with new technologies, including 5G, electric cars, IoT, and more.
IMPACT Washington, D.C. 2019 Recap: Leaders Call for Action on USMCA Trade Deal
Top executives from electronics companies across the United States were in Washington, D.C., last week to call on the Trump administration and Congress to support policies that will drive the electronics industry’s future growth in North America and worldwide.
FlexFactor Program Informs, Inspires, Attracts, and Recruits Talent
Barry Matties and Nolan Johnson speak with Brynt Parmeter, Emily McGrath, Clarence Chi, and Mikayla Ridi about the NextFlex program FlexFactor. This initiative aims to help high school and college students see potential futures in the advanced manufacturing sector and combat common misperceptions young people might have about modern-day manufacturing.
Growing Opportunities with 3D Printed Electronics
Dr. Kurt Christenson, senior scientist at Optomec, discusses the company’s Aerosol Jet technology, which eliminates the need for wire bonding by printing interconnects on 3D surfaces. Christenson also explores the current state of the technology and highlights the market segments and applications with the most to benefit from being able 3D print electronic components, such as resistors, capacitors, antennas, and transistors.
DuPont on New Beginnings and Empowering the Industry
Andy Kannurpatti gives the I-Connect007 team an overview of the latest news from DuPont Electronics and Imaging, including investments toward the new production assets in Ohio, Silicon Valley Technology Center, and other facilities. He also details how the company is engaging OEMs and PCB fabricators and design teams, as well as some exciting business updates coming this spring and summer.
Technically Appropriate Material Choices are Key to Design Success
Materials are no longer a passive part of the design; they play an active role in the manufacturability, reliability, and speed of a PCB. I-Connect007’s Nolan Johnson and Mike Creeden, founder of San Diego PCB Design, discuss several key characteristics that designers should consider in their material selection process.
Learning to Be More Flexible: Case Studies on Improving FPC Design
As miniaturization requirements force manufacturers to pack more functionality into ever-smaller packages, it becomes more difficult to conform to IPC construction recommendations. Achieving robust FPCs requires frequent, iterative interaction internally among the mechanical, electrical, and PCB design teams, as well as with the fabricators and assemblers. The sooner in the design cycle you can engage the supplier and assembler, the better.
Ventec Focuses on High-mix Manufacturing
The I-Connect007 team recently toured Ventec International Group’s Suzhou factory where a modern, flexible manufacturing concept designed for fast delivery is enhancing their established volume manufacturing of specialty, high-reliability epoxy laminates and prepregs. Read on to know more about Ventec's ongoing investment in the facility to offer flexible world-class high-mix manufacturing capabilities for polyimide, thermal management, low-loss, and signal integrity material solutions.
Dan Gamota Discusses Flex and Alternative Substrates
As the VP of manufacturing technology and innovation for Jabil, Dan gave us his take on the current state of flex and alternative substrates and explained why modeling, automation, and process controls are likely to be key ingredients in the recipe for manufacturing non-FR-4 boards in the future.
Automation on Full Display at Recent China Exhibitions
With the rising cost of labor in China, the growing demand for automation has never been stronger. At the recent productronica China 2019, and accompanying shows, one hall was packed full of automation technology. This video gives you a glimpse into what was on display… and the new workforce.
Nano Dimension Offers Update on Dragonfly 3D Printer a Year After Launch
The Nano Dimension Dragonfly 3D printer arrived in much fanfare a little over a year ago. The company has been selling them to customers around the world, many of whom are using them to print antennas, sensors, and PCBs. At AltiumLive in Munich, I asked Product Manager Robert Even to discuss what they’ve learned in the year since the Dragonfly debuted, and some potential uses for 3D printing technology.
Meyer Burger on Inkjet Technology and Digital Printing Benefits
Don Veri, sales and business development manager for Meyer Berger, discusses some of the challenges fabricators face in adopting inkjet technology, the benefits they can expect once it’s deployed in their facility, and the advantages of digital printing in solving problems on the shop floor.
RTW IPC APEX EXPO 2019: Insulectro Sees Growth and Opportunities in Printed Electronics
Judy Warner speaks with Tim Redfern, Insulectro president, and Kevin M. Miller, VP of sales, about growth in the printed electronics market, the direction Insulectro is going, and opportunities for North American PCB suppliers. They note that the company will increase their focus and investment in the printed electronics market.
Flex/MSTC Joint Conference: A Collaborative Week in Monterey
Collaboration filled the air at the Hyatt Regency in Monterey, California, as the 18th annual Flex/Mems&Sensors technical conference brought flex technology and sensor experts and 550+ attendees together to network and share ideas from February 18–21, 2019.
Institute of Circuit Technology Evening Seminar
The Institute of Circuit Technology hosted its first 2019 seminar at the Woodland Grange Hotel in Royal Leamington Spa in the Midlands of England on February 26. The diverse programme of four presentations was introduced by ICT Chairman Andy Cobley, a professor at Coventry University, who stood in for Bill Wilkie, who had been taken ill at short notice.
Inspiring the Next Generation of Industry Leaders: IPC STEM Student Outreach Program
At IPC APEX EXPO 2019, I-Connect007 Managing Editor Patty Goldman spoke with Colette Buscemi, IPC's senior director for education programs, about the success and expansion of the IPC STEM Student Outreach Program, activities and scholarship opportunities for students through sponsor support—including I-Connect007—and feedback she received on the event.
RTW IPC APEX EXPO 2019: Super PCB Discusses High-end PCB Procurement Services
Kelly Dack speaks with Jessica Zhang, program manager for Super PCB, who focuses on serving customers with a small-business-type relationship. Based in Plano, Texas, Super PCB matches customer design requirements to a myriad of supplier capabilities through time-saving, direct communication with the supplier and best pricing.
RTW IPC APEX EXPO 2019: Lenthor Discusses Facility Expansion and New Equipment
Rich Clemente, general manager of Lenthor Engineering, discusses with Dan Feinberg, I-Connect007 Guest Editor, the company’s expansion and new facility and equipment. He also talks about his outlook for the electronics manufacturing industry in North America.
RTW IPC APEX EXPO 2019: Uyemura Discusses Heavy Gold Deposition
Richard DePoto, business development manager at Uyemura, brings Pete Starkey up to speed with the success of the heavy gold deposition process they discussed last year. It has been seamlessly integrated into standard ENEPIG lines to give a choice of finishes, and how advances in electroless palladium have enabled the elimination of electroless nickel for high-speed signal integrity.
RTW IPC APEX EXPO 2019: New IPC Technical Education Program Manager
Brook Sandy-Smith discusses her new role as IPC technical education program manager, which is also a brand-new IPC position. She further explains the benefits of membership, when a member should contact her, the IPC STEM Outreach Program, and upcoming events.
RTW IPC APEX EXPO 2019: Taiyo Discusses New Solder Masks and Photoimageables
Donald Monn, Midwest regional sales manager for Taiyo America, turns the tables on I-Connect007 Technical Editor Pete Starkey and quizzes him about his knowledge of Taiyo's new crack-resistant white solder mask for automotive, and the company's standard photoimageables re-formulated for laser direct imaging (LDI) that avoid the need for UL requalification.
RTW IPC APEX EXPO 2019: Ventec's Goodwin on Global Technology Directions
Mark Goodwin, Ventec International Group CEO EMEA and USA, comments on technology directions globally and in the North American market. He also explains how Ventec's quality accreditations, technical expertise, and flexible manufacturing capacity continue to strengthen their leading position.
CES 2019: More Show Floor Favorites
In my final piece covering CES 2019, I will review more automotive technology, updates on 3D printing, and some trending devices such as smartwatches and new computer components for those that either need or just want to have extremely powerful and impressive-looking computers.