Ventec Focuses on High-mix Manufacturing
The I-Connect007 team recently toured Ventec International Group’s Suzhou factory where a modern, flexible manufacturing concept designed for fast delivery is enhancing their established volume manufacturing of specialty, high-reliability epoxy laminates and prepregs. Read on to know more about Ventec's ongoing investment in the facility to offer flexible world-class high-mix manufacturing capabilities for polyimide, thermal management, low-loss, and signal integrity material solutions.
Dan Gamota Discusses Flex and Alternative Substrates
As the VP of manufacturing technology and innovation for Jabil, Dan gave us his take on the current state of flex and alternative substrates and explained why modeling, automation, and process controls are likely to be key ingredients in the recipe for manufacturing non-FR-4 boards in the future.
Automation on Full Display at Recent China Exhibitions
With the rising cost of labor in China, the growing demand for automation has never been stronger. At the recent productronica China 2019, and accompanying shows, one hall was packed full of automation technology. This video gives you a glimpse into what was on display… and the new workforce.
Nano Dimension Offers Update on Dragonfly 3D Printer a Year After Launch
The Nano Dimension Dragonfly 3D printer arrived in much fanfare a little over a year ago. The company has been selling them to customers around the world, many of whom are using them to print antennas, sensors, and PCBs. At AltiumLive in Munich, I asked Product Manager Robert Even to discuss what they’ve learned in the year since the Dragonfly debuted, and some potential uses for 3D printing technology.
Meyer Burger on Inkjet Technology and Digital Printing Benefits
Don Veri, sales and business development manager for Meyer Berger, discusses some of the challenges fabricators face in adopting inkjet technology, the benefits they can expect once it’s deployed in their facility, and the advantages of digital printing in solving problems on the shop floor.
RTW IPC APEX EXPO 2019: Insulectro Sees Growth and Opportunities in Printed Electronics
Judy Warner speaks with Tim Redfern, Insulectro president, and Kevin M. Miller, VP of sales, about growth in the printed electronics market, the direction Insulectro is going, and opportunities for North American PCB suppliers. They note that the company will increase their focus and investment in the printed electronics market.
Flex/MSTC Joint Conference: A Collaborative Week in Monterey
Collaboration filled the air at the Hyatt Regency in Monterey, California, as the 18th annual Flex/Mems&Sensors technical conference brought flex technology and sensor experts and 550+ attendees together to network and share ideas from February 18–21, 2019.
Institute of Circuit Technology Evening Seminar
The Institute of Circuit Technology hosted its first 2019 seminar at the Woodland Grange Hotel in Royal Leamington Spa in the Midlands of England on February 26. The diverse programme of four presentations was introduced by ICT Chairman Andy Cobley, a professor at Coventry University, who stood in for Bill Wilkie, who had been taken ill at short notice.
Inspiring the Next Generation of Industry Leaders: IPC STEM Student Outreach Program
At IPC APEX EXPO 2019, I-Connect007 Managing Editor Patty Goldman spoke with Colette Buscemi, IPC's senior director for education programs, about the success and expansion of the IPC STEM Student Outreach Program, activities and scholarship opportunities for students through sponsor support—including I-Connect007—and feedback she received on the event.
RTW IPC APEX EXPO 2019: Super PCB Discusses High-end PCB Procurement Services
Kelly Dack speaks with Jessica Zhang, program manager for Super PCB, who focuses on serving customers with a small-business-type relationship. Based in Plano, Texas, Super PCB matches customer design requirements to a myriad of supplier capabilities through time-saving, direct communication with the supplier and best pricing.
RTW IPC APEX EXPO 2019: Lenthor Discusses Facility Expansion and New Equipment
Rich Clemente, general manager of Lenthor Engineering, discusses with Dan Feinberg, I-Connect007 Guest Editor, the company’s expansion and new facility and equipment. He also talks about his outlook for the electronics manufacturing industry in North America.
RTW IPC APEX EXPO 2019: Uyemura Discusses Heavy Gold Deposition
Richard DePoto, business development manager at Uyemura, brings Pete Starkey up to speed with the success of the heavy gold deposition process they discussed last year. It has been seamlessly integrated into standard ENEPIG lines to give a choice of finishes, and how advances in electroless palladium have enabled the elimination of electroless nickel for high-speed signal integrity.
RTW IPC APEX EXPO 2019: New IPC Technical Education Program Manager
Brook Sandy-Smith discusses her new role as IPC technical education program manager, which is also a brand-new IPC position. She further explains the benefits of membership, when a member should contact her, the IPC STEM Outreach Program, and upcoming events.
RTW IPC APEX EXPO 2019: Taiyo Discusses New Solder Masks and Photoimageables
Donald Monn, Midwest regional sales manager for Taiyo America, turns the tables on I-Connect007 Technical Editor Pete Starkey and quizzes him about his knowledge of Taiyo's new crack-resistant white solder mask for automotive, and the company's standard photoimageables re-formulated for laser direct imaging (LDI) that avoid the need for UL requalification.
RTW IPC APEX EXPO 2019: Ventec's Goodwin on Global Technology Directions
Mark Goodwin, Ventec International Group CEO EMEA and USA, comments on technology directions globally and in the North American market. He also explains how Ventec's quality accreditations, technical expertise, and flexible manufacturing capacity continue to strengthen their leading position.
CES 2019: More Show Floor Favorites
In my final piece covering CES 2019, I will review more automotive technology, updates on 3D printing, and some trending devices such as smartwatches and new computer components for those that either need or just want to have extremely powerful and impressive-looking computers.
RTW IPC APEX EXPO 2019: Ventec Highlights Core Solutions for Thermal Management
Jack Pattie, president of Ventec International Group, speaks with I-Connect007 Guest Editor Kelly Dack about the many heat issues associated with circuit boards right now—whether in general applications, power applications, PCs—as everyone demands smaller, faster, and more powerful systems.
Laser Focus on Flex and Rigid-flex
ESI’s Chris Ryder, director of Product Management, and Shane Noel, Flex Systems product manager, discuss laser vias for flex users and the increasing necessity for companies to collaborate early on and become more and more involved, whether that be in the product design, or with the process or base material manufacturers.
Atotech at HKPCA on Announcements and Advancements
Edy Yu, managing editor for PCB007 China, caught up with Daniel Schmidt, Atotech’s director of global marketing, during the 2018 HKPCA and IPC Show in December. Edy and Daniel discussed Atotech’s new announcements at the show including their new solutions for 5G, high-speed, and high-frequency applications, and more.
ESI’s Chris Ryder: There’s More to Choosing a Laser Than You Think
At the recent HKPCA show, I sat down with ESI’s Chris Ryder, director of product management—HDI—to discuss considerations for choosing a new laser system, and how ESI uses its decades of flex and rigid-flex drilling experience to help guide customers in their decision-making process.
Robert Art on the Importance of Thermal Management
Robert Art, global account manager for IMS materials at Ventec International Group, discusses future market requirements for thermal management materials, the need for a better understanding of the concept of thermal impedance, and an initiative to propose a consistent industry-standard method for measuring thermal conductivity while at electronica 2018.
The Shape of Things to Come: Curved, Flexible, Stretchable, and Three-Dimensional Electronics
The seamless integration of electronics into flexible, curved, and even stretchable surfaces is being requested for several markets, such as automotive (dashboards, lighting, sensors), smart buildings (lighting facades, air quality, solar panels), medical (health patches, X-ray, analysis), and smart clothing (position tracking, sports).
Successful Flex Circuit Design and Processing Guidelines
With the use of sensors and technology in everything from mobile phones to refrigerators, automobiles, and wearable medical devices, circuit boards are a component in many different types of products. In today’s world of electronics, any product with an on-off switch contains a circuit board.
Ventec's Marketing Strategy and Their Newly Appointed Technology Ambassador
At electronica 2018, Mark Goodwin, chief operating officer at Ventec International Group, discusses the company’s marketing strategy along with their newly appointed technology ambassador, Alun Morgan, and how he sees the world.
Meet All Flex’s New President and CEO Matt Keithly
All Flex Flexible Circuits and Heaters recently appointed Matt Keithly as their new president and CEO. In this exclusive interview, Keithly discusses his background, the direction of the company, and topics related to flexible circuits and other areas of All Flex’s business.
150+ Years of Experience: Reflections with Three Industry Icons
You would be hard-pressed to find a more knowledgeable and experienced group than that of Gary Ferrari, Gene Weiner, and Happy Holden. In a brief interview with Barry Matties, these three industry icons consider the past, present, and future state of electronics manufacturing while also offering advice to the newest generation of manufacturers.
Flex Talk: Additive Electronics—PCB Scale to IC Scale
SAP, mSAP, SLP—what kind of crazy acronyms have we adopted now, and how much do you really need to know? In terms of consumer electronics, there is a good chance that the smartphone attached to your hand at all times contains a PCB fabricated with this technology—or at the very least, the next-generation smartphone that you purchase will utilize mSAP technology.
What's FLITE About? An Old Man's Observations
FLITE—Female Leaders in Tech, Everywhere—aims to raise the visibility of females in technology, manufacturing, and engineering by celebrating their achievements and learning from their experiences. I-Connect007 Technical Editor Pete Starkey sit in on FLITE's networking event at the recent What's New in Electronics (WNIE) Live show to find out more about this enterprise, which turned out to be an inspirational eye-opener.
SLP: The Next Level of Technology
As our electronic devices and machines become more powerful and as Moore’s Law chugs along, things in the world of PCBs keep getting smaller. You know the drill—finer lines and spaces, thinner laminates, more layers— cram more circuitry into the same or shrinking area. Where will it all end? Or will it?
Building a Better Board: It Always Comes Back to Communication
For our experts meeting on the August’s theme of reliability, we reached out to Colonial Circuits and asked them to participate in a conference call with our I-Connect007 editorial team consisting of Dan Feinberg, Andy Shaughnessy, Patty Goldman, and Happy Holden. Joining the call from Colonial Circuits was Mark Osborn, president and CEO, Kevin Knapp, quality manager, and Rodney Krick, manufacturing manager.
Reliability Takes on a New Urgency
Consumers wanted a reliable car that wouldn’t break down on the road; a computer that wouldn’t crash; a phone network that wouldn’t drop our calls; the plane we were hurtling across the sky in to stay in the air and land safely, with the wheels down. In retrospect, those seem rather simple wants, and the industry certainly wants to deliver.
Atotech on Challenges and Opportunities in PCB Manufacturing
Abel Ruivo, Atotech Deputy Business Director of Electronics for Greater China, and Daniel Schmidt, head of Global Marketing for Electronics at Atotech Group, spoke with I-Connect007 about the various challenges of PCB manufacturing in China, as well as about the opportunities in the sector.
Reflow Perspectives to Flex Circuit Assemblies
At the recent NEPCON China 2018 event in Shanghai, I spoke with Ralf Wagenfuehr, plant manager at Rehm Thermal Systems, to gain insight into flex circuit assembly, and the challenges of reflow soldering. He also speaks about the need for industry forums focused on soldering flex printed circuits.
Flex Time: Why is Rigid-Flex So Expensive?
One question that I hear fairly often, particularly after an initial quotation, is “Why is rigid-flex so expensive?” In this article, I’ll share with designers the cost drivers in rigid-flex relative to standard rigid boards and flex circuits with stiffeners. A typical rigid-flex PWB will cost about seven times the cost of the same design on a hard board, and two to three times an equivalent flex circuit with stiffeners.
EIPC 50th Anniversary Conference Day 2: The Past, the Present and the Future, Pt. 1
The sun was shining in Dusseldorf as delegates returned to the conference room for the second day of the EIPC 50th Anniversary Conference. There were very few empty chairs—even those who had enjoyed a late networking session in the hotel bar had taken their seats as Paul Waldner opened the proceedings with Session 5, on a theme of future PCB design, material and processes for the PCB supply chain.
Excerpt: The Printed Circuit Designer’s Guide to…Flex and Rigid-Flex Fundamentals
The design process is arguably the most important part of the flex circuit procurement process. The decisions made in the design process will have a lasting impact, for better or worse, throughout the manufacturing cycle. In advance of providing important details about the actual construction of the flex circuit, it is of value to provide some sort of understanding of the expected use environment for the finished product.
5G—Generation after Generation
If you’re like me, you’ve probably heard of 5G, but you may not understand what all the fuss is about. First, 5G simply means fifth-generation mobile networks. The best way to understand what 5G is about is to understand all the other Gs, like 3G and 4G (we rarely hear about the early Gs!).
The Institute of Circuit Technology Annual Symposium 2018
ICT technical director Bill Wilkie is well-known for choosing notable venues for Institute of Circuit Technology events, and his choice for this year’s Annual Symposium was the National Motor Museum, located in the village of Beaulieu in the heart of the New Forest, a national park in the county of Hampshire in Southern England. The region is known for its heathland, forest trails and native ponies.
Experts Discussion with John Talbot, Tramonto Circuits
For this first issue of Flex007 Magazine, we interviewed John Talbot, president and owner of Tramonto Circuits. Headquartered in metro Minneapolis, Minnesota, Tramonto manufactures flexible and rigid PCBs for a variety of industry segments. Editors Andy Shaughnessy, Patty Goldman and Stephen Las Marias asked John to discuss the challenges and opportunities in the world of flexible circuits, and some of the trends he’s seeing in this market.
Experts Discussion: The Flex Technologists Speak
For our first issue of the Flex007 Magazine, we invited a group of flexible circuit experts to discuss their work in this rapidly growing segment. Participants included Jonathan Weldon of DuPont, Mark Finstad of Flexible Circuit Technologies, and Scott McCurdy and Scott Miller of Freedom CAD. In a free-wheeling discussion with Andy Shaughnessy and Barry Matties, these technologists share their thoughts on the challenges and opportunities in flexible circuits, as well as what constitutes the cutting edge of flex right now.
The Survey Said: Industry Optimistic After Strong 2017
During recent trade shows and conferences, we spoke with a variety of fabricators and assembly providers. They had one thing in common: Every company achieved strong growth in 2017, and shared a positive outlook about the future. This year, the industry is optimistic, driven by positive economic outlook, growing customer demand, and new technologies and vertical markets, among others.
Geeking Out at Geek-A-Palooza MSP 2018
Kiersten Rohde, I-Connect007 editor, covers Geek-A-Palooza MSP 2018. Geek-A-Palooza "is a different kind of gathering that combines networking with a fun, relaxing atmosphere." This event provided an opportunity for local electronics geeks from every industry segment to gather for a professional social event that included great music, food, drinks, games, raffle prizes, and booths.
Autonomous Transportation: Using Disruptive Technologies to Create Social Disruption and Change
Those of us who have been driving for the last 50−60+ years have seen great change. At first, it was slow; we went from manual shift to automatic shift transmissions, then we started adding simple things such as FM radio (yes, that was a premium add-on in the early ‘60s), then air conditioning and power windows, fuel injection, cruise control, airbags, and in the last decade everything from GPS to LED lighting to automatic speed and distance control, back-up and surrounding cameras and so much more.
Unimicron Germany Rises from the Ashes with New Smart Factory
This is a review of the grand opening of Unimicron’s new smart factory in Geldern, Germany. A fire in a PCB shop is an experience we all dread, but still it happens, and the consequences can be devastating. In the early hours of December 28, 2016, the innerlayer production plant at RUWEL International in Geldern, Germany, caught fire and the whole factory and its contents were destroyed.
SHOW & TELL: Bringing STEM Students to IPC APEX EXPO for a View of the Industry
On the last morning of IPC APEX EXPO 2018, we met with Nancy Jaster, IPC design programs manager and one of the driving forces behind IPC’s STEM Outreach program for high school students. We spoke about the students who were arriving on site at IPC APEX EXPO, and what the industry, and IPC, hoped to achieve with this valuable program.
Setting the Record Straight: CEO Asher Levy on the Future of Orbotech
With the recent planned acquisition of Orbotech in place by maker KLA-Tencor, much of the industry has speculated about Orbotech’s future. Barry Matties spoke with CEO Asher Levy about what lies in store for the Orbotech group and, more specifically, their PCB division should the deal close.
Succeeding at the Velocity of Technology: An IPC APEX EXPO 2018 Wrap-Up
After many months of planning, IPC APEX EXPO 2018 proved to be a success. From revolutionary advancements displayed on the show floor to expert insights conveyed in technical conference sessions and professional development courses, IPC APEX EXPO provided the learning and connections that helped 4,574 attendees from 43 countries prepare for the future.
The Vast Offerings in Laminate Technologies from TUC
While at IPC APEX EXPO a few weeks ago, I sat down with George Hsin, chief strategy officer for TUC Worldwide, and Alan Cochrane, president of TUC North America. I was interested in learning more about the company and their laminate products and Alan was happy to fill me in.
From Math to Marketing: Orbotech CMO’s Worldview of the Industry
Barry Matties met with Orbotech’s corporate VP of Business Development and CMO, Lior Maayan, in Shenzhen and spoke about the next-generation processes currently challenging Orbotech's R&D team. Most notable among them are additive technologies like the automated optical shaping solution, and the growth of MSAP, flex, and HDI.
A Discussion About Everything Under the Sun
From flex circuits to HDI, Industry 4.0, leading market drivers, and materials—this wide-ranging discussion with Sunshine Global Circuits CTO David Aldape highlights the latest and future developments, challenges, and opportunities in the PCB manufacturing industry.
ESI Targets Growing HDI Space
At the recent HKPCA and IPC Show 2017 in Shenzhen, China, Chris Ryder, director of product management for HDI at Electro Scientific Industries Inc. (ESI), discusses how laser-based processing is addressing the challenges in HDI development, and MSAP technology and its impact on the PCB industry.
Weiner’s World—March 2018
SEMICON China 2018 was amazing in its size and attendance. More than 1,000 exhibitors filled an event record of more than 74,000 square meters of exhibition space—the size of nearly 10 professional soccer fields. This year's theme was "collect, collaborate, innovate."
RTW IPC APEX EXPO: Miraco Company and Services Introduction
Miraco's current quality manager, William Pfingston, fills Guest Editor Steve Williams in on the company's contract manufacturing capabilities and services, including strengths in design and flex circuits. He also talks about the company's expansion and organizational changes.
RTW IPC APEX EXPO: Insulectro Discusses Importance of Helping PCB Shops
Chris Hunrath, VP of technology at Insulectro, discusses their recent expansion of inventory, especially substrate materials, the need for quick access, and the importance of working closely with their customers and OEMs.
RTW IPC APEX EXPO: Catching Up with Cirexx International
Philipp Menges, president of Cirexx International, discusses yearly company updates and growing markets, including automotive, medical, and military.
Three New Mars2020 Rover Technologies: What Powers the “Body Parts” on the Mars2020 Rover?
The Mars2020 Rover Mission, designed by JPL, is the next NASA Mars Exploration Program mission that is planned to launch in 2020. Some goals of the mission include to check for past signs of life, to help prepare for manned Mars missions, and to collect soil samples and cache them on the surface for potential return to Earth by a future mission.
Bridging Knowledge and Understanding of Thermal Management Materials
At IPC APEX EXPO recently, Pete Starkey and Ian Mayoh, Ventec International’s technical support manager, had a chance to sit down and discuss the I-Connect007 micro E-book: The Printed Circuit Designer's Guide to Thermal Management with Insulated Metal Substrates, of which Ian is a co-author.
New Year, New Equipment—Right?
This month, we will discuss the equipment purchasing decision-making process. How many of you can recall the earliest “dippy dunk” PCB shops, so-called because that’s exactly how it was done? There were no conveyorized lines, no automatic hoists, no load/unload stations, maybe not even a lab for analyzing the plating baths.
Part 2: EIPC’s Winter Conference in Lyon, France: Day 2 Review
The final session, on European needs for new technology, product safety and training, was introduced and moderated by EIPC board member Dr. Michele Stampanoni, vice president of strategic sales and business development at Cicor Group.
EIPC’s Winter Conference in Lyon, France: Day 2 Review
The first day of the conference had started and ended in the dark—a long and technically intense day! After a convivial conference dinner and a good night’s sleep we were back on the bus, this time in daylight at the slightly later time of 8:00 a.m., for the journey from downtown Lyon back to Alstom’s conference facility in Villeurbanne, and it wasn’t raining. In fact, there was even some sunshine later in the day!
Part 2: EIPC’s 2018 Winter Conference in Lyon, Review of Day 1
We continue with the rest of Pete Starkey’s report on Day 1 of the EIPC Winter Conference in Lyon, France. Included in this segment are presentations by Ventec, Ericsson, TTM and others, plus photos of their evening tour of Alstom.