Ventec’s California Facility Receives ISO 9001:2015 Certification
December 10, 2020 | VentecEstimated reading time: 2 minutes
Ventec International Group Co., Ltd. is proud to announce that it has passed the ISO 9001:2015 audit for its Quality Management System at its US-facility in Fullerton, following an audit by certifying body Intertek. This follows the certification of Ventec’s Chicago facility earlier this year.
ISO 9001:2015 sets out the criteria for a quality management system and is based on a number of quality management principles including a strong customer focus, the motivation and implication of top management, the process approach and continual improvement. The hard work put in by Anthony Guerra, Julie Vance and the entire Ventec Fullerton staff, supported by Steve Williams from TRAC has ensured achieving a perfect audit with official certification being issued this month.
"Further to successfully certifying our Chicago facility in April of this year, I am very proud that our Fullerton facility now has also successfully passed the ISO 9001:2015 audit without any instances of non-conformity," said Jack Pattie, President Ventec (USA). "It recognizes the hard work of the entire Ventec team and confirms the success of our quality strategy for the benefit of all our customers."
"Ventec's global emphasis on implementing and maintaining a seamless QMS that adds value to the business is second to none. Jack and the entire team in Fullerton embraced the process and were highly engaged in the development and implementation. The results speak for themselves; a perfect audit for Fullerton to match Chicago’s results earlier this year. It is a pleasure working with an organization that gets it," added Steve Williams, President of TRAC.
"Ventec maintains robust quality management systems in all its facilities around the world including AS9100 Rev D and IATF 16949:2016, ensuring that all our customers receive reliable, consistent, good quality products and services from us through our fully controlled global supply chain," said Mark Goodwin, COO Europe & Americas.
Ventec International Group Co., Ltd. (6672 TT) is a world leader in the production of polyimide & high reliability epoxy laminates and prepregs and specialist provider of thermal management and IMS solutions.
About Ventec International Group
Ventec International Group Co., Ltd. (6672 TT) is a premier supplier to the Global PCB industry. With volume manufacturing facilities in Taiwan and China and distribution locations and manufacturing sites in both the US and Europe, Ventec specializes in advanced copper clad glass reinforced and metal backed substrates. Ventec materials, which include high-quality enhanced FR4, high-speed/low-loss- & high-performance IMS material technology and an advanced range of thermal management solutions, are manufactured by Ventec using strict quality-controlled processes that are certified to AS9100 Revision D, IATF 16949:2016 and ISO 9001:2015, and are backed by a fully controlled and managed global supply chain, sales- and technical support-network. For more information, visit www.venteclaminates.com.
Suggested Items
The Chemical Connection: Reducing Etch System Water Usage, Part 2
05/02/2024 | Don Ball -- Column: The Chemical ConnectionIn my last column, I reviewed some relatively simple ways to reduce water usage in existing etch systems: cutting down cooling coil water flow, adding chillers to replace plant water for cooling, lowering flow rate nozzles for rinses, etc. This month, I’ll continue with more ways to control water usage in your etcher. Most of these are not easily retrofittable to existing equipment but should be given serious consideration when new equipment is contemplated. With the right combination of add-ons, it is possible to bring the amount of water used in an etch system to almost zero.
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.