-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
What Designers Should Know About Test
February 5, 2024 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 2 minutes
Bert Horner, president of The Test Connection, Inc. (TTCI) in Hunt Valley, Maryland, has been helping PCB designers address design-for-test challenges, as well as the need to consider DFT early in the design cycle. I asked him to discuss some of the DFT issues that PCB designers need to be more aware of, and what designers can do to help PCB manufacturers avoid test problems farther down the line. As Bert says, many DFT snafus could be avoided if designers had a better understanding of the actual testing process.
Bert, what are some things that designers need to know about designing for test?
Bert Horner: Of course, test is an integral part of the manufacturing process. Often, designers will design a board that works, but it may only work in a lab or a non-production environment. With DFT, there are really only a couple of key things that you'll need to consider. One is the controllability of parts; you want to be able to disable, control tri-state, and do certain things to have controllability of the card as you're testing areas of the circuitry. You look around at the different control ports, and if you want to utilize things like boundary scan, make sure the five key pins have some kind of access, whether it's going through a header or a bed of nails, where you can access that point to utilize the boundary scan capabilities on the board. Then you’ll have that controllability in utilizing test tools.
Also, be sure to have access to allow for enough power and ground points on the board so you have a balance and you don't have ground bounce. If you're looking at ICT, flying probe, or anything with a bed of nails, you want physical access so you don't have to have the big 0.032" points. Different probing technologies allow you to utilize smaller center-to-center spacings. You can use a through-hole device as a test point on a net; just utilize an unmasked via and call it a test via. Normally on a bed of nails, you don't want to go below 0.018" to .020" in diameter; you want to stay in 0.039", 0.050", 0.075", or 0.100" center-to-center spacing.
When you look at testability, controllability, having enough power and ground points on the board, and then the physical access, you realize that DFT could be setting up your test strategy. I know I will be looking at these bypass caps with AOI, and AOI or testing will be looking at this, so I don’t need to have test points all over that part of that circuitry. If you’re in RF, or even just high-speed digital, you might say, “I can't have test points hanging off that because there are a whole bunch of RCLs hanging off that location.” Well, what can we test, and how do we test that high-speed portion of that board through a black box when not everything is high speed?
To continue reading this conversation, which appeared in the January 2024 issue of Design007 Magazine, click here.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Software Solutions for Circuit Board Challenges
05/03/2024 | Real Time with...IPC APEX EXPONolan Johnson speaks with Will Webb from Aster Technologies about their software solutions for design teams, manufacturing, test engineers, and process engineers. Aster's software addresses the increasing complexities of circuit boards and the need for alternative testing methods.
Manta Ray UUV Prototype Completes In-Water Testing
05/02/2024 | DARPAThe Manta Ray prototype uncrewed underwater vehicle (UUV) built by performer Northrop Grumman completed full-scale, in-water testing off the coast of Southern California in February and March 2024.
Real Time with… IPC APEX EXPO 2024: Exploring Electronic Card Testing and AI Integration with SPEA
05/02/2024 | Real Time with...IPC APEX EXPOLuca Fanelli, president of SPEA, and vice president Andrea Furnari discuss the company and its business units. The challenges in testing electronic cards and SPEA's solutions are discussed, and its focus on the US market is emphasized. The use of AI in testing, particularly in optical inspection and test program execution, is also examined.
Boeing T-7A Red Hawk Triples Progress
05/01/2024 | BoeingThe Boeing T-7A Red Hawk achieved three recent milestones, propelling the advanced pilot trainer for the U.S. Air Force forward.
Keysight Secures New Test Case Validations for Narrowband Non-Terrestrial Networks Standard
04/30/2024 | Keysight TechnologiesKeysight Technologies, Inc. has validated new conformance test cases for 3rd Generation Partnership Project (3GPP) Release 17 (Rel-17) standards for non-terrestrial networks (NTN) using narrowband internet of things (NB-IoT) technology.