Ding Cheng of BYD Electronic: Embracing the FPC Factory Model of the Future

Reading time ( words)

The topic of the third issue of PCB007 China Magazine is "The Wide World of Flex." Around this theme, we asked one of the leaders of China's FPC industry, Ding Cheng, general manager of the FPC Division of Shenzhen BYD Electronic Parts Company, to share his perspective about trends in flex, and where he thinks that market is headed in the future. 

Tulip Gu: What trends have you seen in the flexible printed circuit market in recent years, such as product applications, technology updates, and process improvement? 

Ding_Cheng.jpgDing Cheng: I think the FPC market is mainly affected by the following drivers. While product requirement are getting smaller and smaller, the product itself should also be smaller. Traces and spaces should be finer, 9/12/9 double-sided non-adhesive material will be widely implemented. And 50/50 trace, 0.1 mm vias and 0.05 mm blind vias will become the market standard. 

There are many technical requirements that 5G brings, such as high frequency, loss control, etc. The material process consistency, processing difficulty, and electrical performance testing requirements will be higher and higher. 

BYD2.jpgLastly, FPC is being driven by the requirements of faster assembling speed and direct assembly production. Today, FPC manufacturers are asked to provide similar services like EMS. FPC + SMT + assembly will become the best choice, but also the last choice. In addition to soldering electronic devices on the FPC, more and more orders request the integration of metal/plastic structural parts, die-cut plastic parts, dispensing, etc. We found that the end-customer is gradually transferring the hard-to-process part for EMS manufacturers to the upstream FPC fabricators. 

Gu: What is the biggest advantage for Chinese FPC manufacturers? Looking at the global market, could this advantage provide global competitiveness for Chinese manufacturers? 

Ding: Chinese FPC manufacturers basically can be divided into two kinds: one is the supply end, which provides product assemblies, similar to small EMS providers. The other focuses on specialized modules (LCM, CC, TP), providing FPC to these fabricators. But Chinese FPC manufacturers' technical capabilities and management capabilities are relatively weak; their product portfolio is mainly composed of double-sided circuits. 

Today, the Chinese FPC industry's main end-customers are mobile phone and tablet companies. There are quite a lot of models out there, changing fast, with short cycle times. Chinese FPC companies are well adapted to these. But, there are two sides to every coin; these also lead to shorter design cycles, which will lead to poor manufacturability, in turn resulting in poor production consistency. At the same time, with lots of models, production of one model is limited, resulting in limited investment on tooling and equipment. Overall, Chinese FPC manufacturers lack technology accumulation. Also, their management is weaker than foreign manufacturers. 

BYD3.jpgCompared to Apple or Samsung, they have less models, more units sold, longer design cycle, mass production quality is easier to control. Lots of Japanese and South Korean companies are opening facilities in mainland China or Southeast Asia with solid quality control and good yields, and their prices are not much higher than that of Chinese manufacturers. Meanwhile, workforce and environmental policy changes are leading to rising costs, so that Chinese manufacturers may have lost the cost advantage.

Today, in terms of the complexity of product, Chinese manufacturers are basically double-sided, while the Korean rigid-flex manufacturers took about 50% of the entire FPC production. In recent years, Korean companies have been developing rapidly, and their technical capabilities have even surpassed some major Japanese companies. Their factories are highly automated; AVI visual inspection is very common. 

In my opinion, FPC + SMT + assembly is extremely complex. It's not something that other industries can imagine. FPC is characterized by its flexible design, but at the same time, designing and manufacturing is very much dependent on people. FPC requires Chinese manufacturers to try to eliminate the variations, solidify process, promote automation and IT management. The biggest factor in variations is the human factor, we must control, manage it well. 

Gu: Artificial intelligence application in automotive electronics is a highlight in the market and Chinese and foreign manufacturers in this area continue to grow. With BYD as one of the leading FPC and new energy vehicle manufacturers in China, what is your response? 

Ding: As for automotive electronics, we are mainly supplying ourselves, including sensor, remote control, multimedia, power batteries, lights, gearbox, etc. We are considering to provide them to other automotive companies in the future. 

BYD1.jpgGu: Can you share the current status of the new plant? 

Ding: In addition to single-sided RTR production line established in 2006 in our Shen Hui facility, we have invested in a new double-sided RTR production line, which can perform RTR laser drilling, remove residue and black hole, RTR copper plating, RTR automatic alignment exposure, all the way to the finished circuit, 100% AOI inspection, double-sided 50/50 line spacing, 0.1 mm vias / 0.05 mm blind vias, plate plating and hole plating production capacity. 

In the future, we will be able to do automatic drilling, automatic stamping, automatic stiffener application, automatic sticker application, automatic electrical test, automatic loading and unloading, automatic dispensing and other automated processes. Some will be able to be automatically visual inspected, QR code traceability; SMT production lines with AOI and SPI as standard equipment will be ramped up. At the same time, we will actively implement smart manufacturing for the full realization of production automation, IT management, and personnel specialization, as well as comprehensively promoting lean production and good management. Our vision is to become the most competitive FPC assembly provider. 

Meanwhile, our new plant in Jiangxi will have the capacity of 50,000 square meters of precision double-sided + assembly by the end of 2017. The capacity of the FPC Division will reach 160,000 square meters per month by then, marching on the FPC + SMT + assembly to EMS path. 

Gu: Thank you for your time. 

Ding: Thank you. 


Tulip Gu is executive editor of PCB007 China, with I-Connect007 China.


Suggested Items

Plating on Silver: What’s Old is New Again

07/07/2022 | Denis Jacques, Technic Inc.
About three decades ago, immersion silver, a nitrate-based process, gained a lot of market share in the world of PCB final finishes. More economical than ENIG, flat, solderable, and conductive, it had everything going for it—everything but corrosion resistance in a harsh environment, that is. Champagne voids were also an issue, along with line reduction. But the worst drawback, the characteristic that made the part short over time, was creep corrosion. A build-up of copper sulfide salt that grows in contact with a sulfur-rich environment, heat, and moisture resulted in failures in the field. This was enough to scar the process for good.

EIPC Summer Conference 2022: Day 2 Review

06/29/2022 | Pete Starkey, I-Connect007
Örebro, Sweden on June 15 brought a bright and early start to Day 2 of the EIPC Summer Conference for those who had enjoyed the previous evening’s networking dinner, but had resisted the temptation to over-indulge or to carry on their long-awaited catch-up conversations with old friends into the small hours. All but a few were in their seats for 9 a.m., awake and attentive for Session 4 of the conference, on the theme of new process technologies, moderated by Martyn Gaudion, CEO of Polar Instruments.

EIPC Summer Conference 2022: Day 1 Review

06/28/2022 | Pete Starkey, I-Connect007
At last, a live EIPC conference and this time in the Swedish city of Örebro, “where history and contemporary culture converge,” a pleasant and convenient location for an event that included a privileged visit to the Ericsson facility in Kumla. Around 100 delegates made the journey and the Örebro Scandic Grand Hotel was an excellent conference venue for the June 14-15 conference.

Copyright © 2022 I-Connect007. All rights reserved.