Toray Creates Revolutionary PPS Film for 5G Circuit Boards


Reading time ( words)

Toray Industries, Inc., announced that it has created a polyphenylene sulfide (PPS) film that maintains the outstanding dielectric characteristics—or low dielectric losses of electrical energy—flame retardancy, and chemical robustness of that polymer while remaining thermally resistant at 40°C higher than conventional counterparts. The new film resists deformation and is dimensionally stable near its melting point. PPS is a super engineering plastic that also offers excellent electrical insulation. It is crystalline, with a melting point of 280°C.

Employing the new film in flexible printed circuits offering 5G and other fast data rates would offer two key benefits. First, the film would cut the transmission losses of communication devices at high frequencies. Second, it would help stabilize high-speed communication across the temperature and humidity spectrums. Flexible printed circuits are film-like wiring boards in which electrical circuits are formed on base materials from bonding thin, soft insulating base films with copper foil or other conductive metals.

Toray has already completed the technology for the new film on a pilot basis, and looks to have a mass production setup in place during fiscal 2020 that would help swiftly popularize devices in the fast-expanding 5G arena. 5G is commanding attention as an advanced platform for delivering outstanding speed capacity, multi-connectivity, and low latency. It harnesses frequency bands below 6 GHz and above 20 GHz.

Development efforts have seen the emergence of practical liquid crystal polymer (LCP) films as flexible printed circuit substrate materials needed for 5G. The dielectric properties of such films reduce transmission losses in high-frequency bands. These films also offer thermal resistance when soldering circuit boards. The expense and processing issues of LCP films fueled the exploration of other materials that could overcome those shortcomings.

Generally PPS film offers superior flame retardancy and chemical resistance while matching or exceeding the dielectric properties of LCP film, and is far less vulnerable to temperature and humidity extremes. On the downside, PPS film deforms easily at high temperatures and provides insufficient resistance to heat when soldering circuit boards.

These considerations drove Toray to blaze a new trail in film design. It was in the course of that effort that it developed a proprietary technology that controls the crystal structure of PPS films. It thereby maintained the outstanding properties of PPS polymer while dramatically increasing thermal resistance.

Testing to 250°C confirmed that Toray’s new PPS film does not deform. Increasing thermal resistance should make it possible to employ existing processing facilities of circuit boards. Toray attained a low coefficient of thermal expansion in the thickness direction of 98 ppm/°C by employing technology it has amassed over many years to control the orientation of film molecular chains. The diverse applications that leveraging those features, including 5G transmission cables and antennas, should enable the design of smaller, multi-layered circuit boards.

By taking advantage of the high thermal dimensional stability and cost-competitiveness of TORELINA, its biaxially-oriented PPS film, Toray looks to secure the adoption of its new film in the FPC market, particularly for smartphones, and thereafter cultivate diverse applications, including for vehicular usage and base stations. In so doing, the company will create new value in keeping with its corporate philosophy of contributing to society through innovative ideas, technologies, and products.

Share




Suggested Items

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

07/08/2022 | Nolan Johnson, I-Connect007
In more than one conversation while discussing the industry this week, the themes have included industry turmoil, lots of business opportunities, and the urgent need to build out to meet changing demands. In fact, our July issue of PCB007 Magazine, which publishes later this month, will focus on these very topics. It’s definitely one not to be missed! These themes also emerged in this week’s top five news items as well. Top stories include an acquisition in the soldering machinery space, sales and service expansion in Mexico, industry data from SIA on semiconductor global sales data, and strong financial numbers from two China-based manufacturers. Now, with the U.S. Congress putting its focus on the PCB industry, things could really heat up. It’s going to be an interesting year.

Material Application for Mini Backlight Unit

04/12/2022 | Aaron Chen, Wazam New Material Co. Ltd.
In 1980, about 90% of the materials used to make PCBs was FR-4. As time went by, technology developed, and electronic devices relentlessly integrated into every area of our lives. The constant acceleration of upgrading meant endless challenges and opportunities for CCL suppliers. Wazam New Material Co. Ltd. is a CCL supplier that strives to be attentive to the needs of its end customers and provide comprehensive solutions. One example is the mini backlight unity (MBLU) application material.

ICT Autumn Seminar Review: Live in 2021!

12/07/2021 | Pete Starkey, I-Connect007
Faced with the choice between a real or virtual event, Bill Wilkie took a calculated risk. It has been many long months since members of the Institute of Circuit Technology had gathered together under one roof, but a fair-sized bunch of industry stalwarts braved the weather and the threat of COVID, descended on the Manor Hotel in Meriden, UK, on Nov. 30, and applauded Bill’s decision to go live. They were not disappointed; the program was superb, the atmosphere upbeat, and the networking opportunity priceless.



Copyright © 2022 I-Connect007. All rights reserved.