Rogers to Feature Advanced Materials Technology, Capabilities for Antennas at IEEE AP-S
July 5, 2022 | Rogers CorporationEstimated reading time: 1 minute
Rogers Corporation will exhibit at the IEEE International Symposium on Antennas & Propagation (IEEE AP-S) in Denver, CO (Booth #400) on July 12-14.
The IEEE AP-S conference is intended to provide an international forum for the exchange of information on state-of-the-art research in antennas, propagation, electromagnetic engineering and radio science.
Key Rogers’ products being featured include:
Recently introduced Radix™ 3D Printable Dielectrics family of products, with the first available material featuring a dielectric constant of 2.8 and low loss characteristics at microwave frequencies. These printable dielectric materials give radio frequency (RF) designers unprecedented design freedom in creating new components, eliminating the need to consider typical manufacturing design constraints.
Radix 3D Printable Dielectrics are proprietary composite materials designed for the scalable manufacture of gradient index and controlled dk 3D structures, through a scalable, high-resolution printing process for end-use RF dielectric component manufacturing. Rogers Corporation’s first Radix 3D Printable Dielectric material has a targeted dielectric constant of 2.8 and a dissipation factor of 0.0043 at 10 GHz when cured.
MAGTREX® 555 High Impedance Laminates: The first commercially available low loss laminate with controlled and matched permeability and permittivity, enabling antenna designers to expand the trade-space of their antenna design, enabling design flexibility and optimization.
Rogers technical staff will be available to discuss the most demanding applications from Phase Array Radar Antennas, high frequency magneto-dielectric materials, ablative Radome materials, and metallized-shaped/3D ADM dielectric solutions.
Conference attendees can learn about “3D-Printed E-Band Gradient Dielectric Lens for Automotive and Industrial Applications” from Trevor Polidore of Rogers Corporation and Philip Lambert of 3DFortify at the 3D Printed Lens Antennas technical session on Friday July 15th starting at 3:20 p.m.
Suggested Items
PCBflow Helps Designers Choose Best Manufacturer for the Job
03/28/2024 | Andy Shaughnessy, Design007 MagazineI recently spoke with a few technologists who have first-hand experience with PCBflow: Susan Kayesar, technical product manager with Siemens; Evgeny Makhline, CTO of Nistec, a CEM based in Israel; and Peter Tranitz, senior director of technology solutions and leader of the IPC Design Initiative. They explain how PCBflow functions, from the designer’s and manufacturer’s viewpoint, and how this database helps break down the wall between these stakeholders.
Elementary, Mr. Watson: Ensuring Design Integrity
03/28/2024 | John Watson -- Column: Elementary, Mr. WatsonBack in February, many of us watched the "Big Game." It reminded me of the saying, “It's not how you start that is important, but rather how you finish." It is perfectly okay when you are talking about sports, you get off to a bad first half and need to recover in the second half. However, when it comes to PCB design, this is not a good practice. If things start badly, they usually don't recover. They continue down that same path, costing more money and losing design time.
Arrow Electronics Launches Intelligent Vision Ecosystem
03/27/2024 | BUSINESS WIREArrow Electronics, Inc. is utilizing the onsemi Imager Access System (IAS) module standard for developing intelligent vision solutions for use in robotics, machine vision, commercial cameras and other uses.
Dymax Will Exhibit Light-Cure Solutions for Today’s Electronics at IPC APEX 2024
03/26/2024 | DymaxDymax, a leading manufacturer of rapid and light-curing materials and equipment, will exhibit at the IPC APEX EXPO 2024 in Anaheim, CA, April 9-11.
Synopsys Announces New AI-Driven EDA, IP and Systems Design Solutions At SNUG Silicon Valley
03/25/2024 | PRNewswireSynopsys, Inc. kicked off its annual flagship Synopsys User Group (SNUG) conference in Silicon Valley at the Santa Clara Convention Center with a keynote presentation by Synopsys president and CEO Sassine Ghazi. Ghazi discussed the unprecedented innovation opportunities and challenges that technology R&D teams face in this era of pervasive intelligence.