Sustainability: What and Why?


Reading time ( words)

In 2013, Earth welcomed roughly 140 million new citizens, replacing approximately 60 million who passed away, netting a growth in the world’s population of 80 million people--a number which happens to roughly match the population of Egypt. The Earth’s population now stands at more than 7.2 billion. (For those interested, real-time statistical estimates for population and other subjects of significance including health and environmental matters can be found here.)

The numbers are staggering and border on the incomprehensible. They also present an ongoing challenge to us all to find ways to make certain that those just joining the human race have a chance to realize their potential. Without question, it is a huge challenge we collectively face. Presently and throughout history, there has existed a great divide between more advanced and exploitative cultures and nations and the many still developing peoples and nations of the world that coexist on this, our little "blue marble" in space, or as futurist and visionary Buckminster Fuller aptly called it, “Spaceship Earth.” He asserted, and rightly so, that we are all astronauts and as its crew, we needed to maintain the delicate balancing act to assure that Spaceship Earth will allow us to survive future trips around our sun.  

The resources of our planet are unquestionably limited and thus are diminishing as we continue to unleash and ramp-up a seemingly never-ending flow of products to both serve and amuse us with output of the global electronics industry likely to be nearing the top of the list of “offenders.” In that regard, we are becoming victims of our own success, to one degree or another. For better or for worse, the engine of economics runs on the fuel that the consumers’ wants must always exceed their needs. Moreover, product developers and promoters are putting forth their best effort to make sure that as many of their products as possible can be perceived as needs rather than simple wants.

Presently, their focus remains targeted on those of us who inhabit the top of the world's economic pyramid and our numbers exceed 3.5 billion people. A substantial market to be sure and already there is evidence that we are, or soon will be, stretching the limits of natural resources. This leaves half of the world's population on the outside looking in. It would seem that, if we are going to satisfy the expectations of those billions of people not fortunate enough to be born in the right place at the right time, we are going to have to make some adjustments in our approach to the design and manufacture of future products. In short, we are going to have to look very seriously at what we might need to do to create a truly sustainable electronics manufacturing industry in the future.

Read the full column here.


Editor's Note: This column originally appeared in the April 2014 issues of SMT Magazine and The PCB Magazine.

Share




Suggested Items

Catching up with ASC’s Bob Duke

11/16/2022 | Dan Beaulieu, D.B. Management Group
Bob Duke has been involved in global sourcing for over 20 years, and by global sourcing, it’s far beyond basic PCBs and PCBAs. Bob was doing this sort of thing before it was cool. He has been involved in everything from metal and plastic fabrication to cables and wire harnesses— just about anything an electronics customer might need. So, when American Standard Circuits started a new division to expand its global sourcing solutions, it was no surprise that CEO Anaya Vardya tapped his long-time friend Bob Duke to lead the way. I sat down to have a talk with Bob about this new division and his plans for the future.

Taiyo’s Brian Wojtkiewicz Discusses Flex, HDI and More

10/25/2022 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with Brian Wojtkiewicz at PCB West about Taiyo’s latest developments in solder mask technology. They discussed the company’s advances in flexible circuits, HDI, and much more. In particular, Brian discusses the importance of reliability in fabrication and assembly. "We’re always in the fabricators’ shops. I’m out in the field talking to them, helping the operators understand the process, and making things work better because then we don’t have issues down the road," he says.

Material Application for Mini Backlight Unit

04/12/2022 | Aaron Chen, Wazam New Material Co. Ltd.
In 1980, about 90% of the materials used to make PCBs was FR-4. As time went by, technology developed, and electronic devices relentlessly integrated into every area of our lives. The constant acceleration of upgrading meant endless challenges and opportunities for CCL suppliers. Wazam New Material Co. Ltd. is a CCL supplier that strives to be attentive to the needs of its end customers and provide comprehensive solutions. One example is the mini backlight unity (MBLU) application material.



Copyright © 2023 I-Connect007 | IPC Publishing Group Inc. All rights reserved.