Opportunities for 3D Printed Structural Electronics
January 28, 2015 | Dr. Jon Harrop, IDTechExEstimated reading time: 1 minute
3D printing refers to the physical construction of an object from a digital description through the selective deposition of material. Today’s 3D printers have many limitations, but the boundaries are being pushed and exciting developments are continuously being made. One of the most promising recent developments in the world of 3D printing is multimaterial printing, not least because it is the key to the emergence of 3D printed electronics. Today’s commercially available multimaterial 3D printers are limited to providing a variety of mechanical characteristics such as rigidity as well as color and transparency, but the seemingly simple inclusion of UV curable conductive inks could make these machines capable of manufacturing objects that contain conductive traces.
This is naturally regarded by many as a direct alternative to traditional PCB manufacture and, in many respects, not a very good one. The logical application for 3D PCBs plays to the traditional strengths of 3D printing: rapid prototyping. However, the ability to lay down conductive traces inside a 3D object has far more potential. There is no longer any requirement to use flat designs. The added design freedom has the potential to greatly simplify circuit layout but will require a new generation of software tools. Furthermore, the natural evolution of this design freedom is the ability to embed electronics in the structure of anything. This is known as structural electronics.
Structural electronics is one of the most important technological developments of this century. It forms a key part of the dream, first formulated 30 years ago, of computing disappearing into the fabric of society. It also addresses, in a particularly elegant manner, the dream of Edison in 1880 that electricity should be made where it is needed. Structural electronics is often biomimetic—it usefully imitates nature in ways not previously feasible.
Suggested Items
iNEMI Webinar: Humidity Robustness and Insulation Coordination for e-Mobility
03/27/2024 | iNEMIThis webinar is a follow-up to the recent Seminar on Humidity Robustness and Insulation Coordination for e-Mobility, organized by iNEMI and ZESTRON Europe and supported by the ECPE.
Electronics Industry Sentiment Rises in March
03/27/2024 | IPCIPC releases March 2024 Global Sentiment of the Electronics Supply Chain Report
Mycronic to Showcase More Versatile, High-productivity Assembly Solutions at IPC APEX EXPO 2024
03/27/2024 | MycronicMycronic, the leading Sweden-based electronics assembly solutions provider, will continue to respond to growing customer demand for high-flexibility, high-productivity solutions for zero-defect PCB assembly at IPC APEX EXPO 2024 in Anaheim, CA on April 9 - 11.
Don Dennison Appointed to Roll Out KIC’s Latest Thermal Analysis System Software in the Northeast
03/26/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, is pleased to announce the appointment of PIT Equipment Services, LLC, led by Don Dennison, as its representative for New York, New Jersey, and Eastern Pennsylvania.
The Many Complexities of PFAS
03/26/2024 | Marcy LaRont, PCB007 MagazineIn its simplest definition, PFAS is a group of chemicals used to make fluoropolymer coatings and products that resist heat, oil, stains, grease, and water. Fluoropolymer coatings can be in a variety of products. Though this definition is not inaccurate, it can be misleading. Depending on who you ask, there are upward of 10,000 PFAS chemistries that can meet various definitions.