Matrix Product Lines: Laminates and Drills


Reading time ( words)

Fred reviews the Panasonic line of laminates, including high speed and flex materials. Hans discusses Jinzhou's new drill design for high aspect ratio drilling, as well as the opening of several high-tech re-pointing centers in North America.

Watch the interview here.

Share




Suggested Items

Michael Carano: A Focus on Process Control, Part 2

09/28/2022 | I-Connect007 Editorial Team
In this second half of our conversation, Michael Carano discusses some of the metrics that fabricators need to consider before investing in new processes, especially process control technologies, and some of the challenges board shops face updating brownfield sites.

A Focus on Process Control, Part 1

09/27/2022 | I-Connect007 Editorial Team
Michael Carano is a noted subject matter expert with respect to process control, electroplating and metallization technology, surface finishing, and reliability. So, it was only natural that we sat down to talk about mechanizing an existing facility given today’s fickle environment. Will any of the CHIPS funding trickle down to bare board fabrication? What process can be adjusted on the factory floor? The focus needs to be more than just on manufacturing and getting work out the door, he says, but also process control.

IPC Advanced Packaging Symposium to Draw Industry, Government Representatives

08/22/2022 | Nolan Johnson, I-Connect007
Nolan Johnson speaks with IPC’s Chris Mitchell, vice president of global government relations, and Matt Kelly, chief technologist, about the inaugural IPC Advanced Packaging Symposium, scheduled for October 11-12, 2022 in Washington, DC. In this conversation, Mitchell and Kelly detail the symposium's objectives, presenters, and the value to both fabricators and assemblers in attending.



Copyright © 2022 I-Connect007 | IPC Publishing Group Inc. All rights reserved.