The Drive for Transparent Circuits


Reading time ( words)

DKN Research develops many types of unique electronic circuits. Some products in our portfolio include ultra-thin conductor circuits as small as 0.2 microns, metal-free circuits, and some circuits up to 20 meters long. Our staff fields many inquiries for packaging of new electronic devices. Lately, there is a lot of interest in transparent flexible circuits. The increase in interest is driven by the recent market expansion of display and optical devices.

One example of this is the touchscreen display for tablet PCs and smartphones. When Apple launched the iPod Touch, touch screen displays became the benchmark for the industry. The flexible circuits found inside must be transparent so the user can see the LCD panel. Unfortunately, the most popular substrate material used in flexible circuits is polyimide film, because it is brown in color and not optically transparent. Circuit manufacturers use PET films instead of polyimide films because its heat resistance is remarkably lower than polyimide film. Circuit manufacturers had to develop a low-temperature process using the correct materials to make this a success. After many trials, PET films are the standard substrate material for touchscreen displays in mobile devices.

Many applications for industrial and aerospace devices demand both transparency and heat resistance. Up until now, this was not possible. Recently, a Japanese plastic manufacturer developed a process using transparent polyimide film as the main substrate for flex circuits in a volume application setting. This will remove a technological barrier for heat resistance and is a huge progress for transparent circuits.

Many are asking if transparent flexible circuits are practical on a commercial scale. The answer could be yes, if we can push through one more barrier: identifying a transparent conductor. Copper foils are the major conductor material for printed circuit boards, but they are not transparent. Indium tin oxide (ITO) was used as an alternative transparent conductor for most of the display devices, because it can be sputtered at relatively low temperatures. Its conductivity is much lower compared to metallic copper, so many researchers are trying to develop conductive organic molecules for this purpose. Other researchers are considering the use of carbon nanotubes or graphene as the transparent conductor; unfortunately, their conductivities are not much greater than ITO, and other problems need to be addressed before any commercial application is considered. Currently, silver nanowire and thin metallic mesh screen may be the key, even though those materials are not transparent. Creating appropriate opening turns the materials transparent with higher conductivities. This is not the perfect solution, but it is practical. That’s why I am optimistic that transparent flexible circuits are practical on a commercial scale.

A few smaller challenges that need to be addressed center on cover materials and adhesive materials. These secondary materials can be made transparent with a few minor changes based on their current performances.

We can now create several types of heat-resistant, transparent flexible circuits by using a few different combinations. The only thing I can’t tell you is how much all of this will cost—the cost structures for most of the materials have not been determined.  

To read back issues of the newsletter, click here.

Headlines of the Week

1. Yaskawa Electric (major equipment manufacturer in Japan) 7/2
Has commercialized a new spot-welding robot, MOTOMAN-VS100, for automobile assembly. It features seven rotating modes.
 
2. Fuji Electric (major electric company in Japan) 7/2
Has rolled out a new steam generation heat pipe. It can utilize low-temperature waste water.
 
3. Hitachi (major electric and electronics company in Japan) 7/3
Has begun volume production of one-chip distortion sensors utilizing a metal-bonding technology for automobile applications.
 
4. AIST (R&D organization in Japan) 7/7
Has developed an ultra-high-density capacitor device using mono-layer carbon nano tube. The size can be one thousandth of an aluminum capacitor.
 
5. Toshiba (major electric and electronics company in Japan) 7/8
Has developed a new multilayer magnetic memory system. It will enlarge the memory capacity of hard disc drives significantly.
 
6. Mitsubishi Electric (major electric company in Japan) 7/14
Has commercialized a new heavy-duty robot series. The largest robot can handle 70 kg.
 
7. AIST (R&D organization in Japan) 7/10
Has been co-developing a new hydrogen base power generation system using aluminum waste materials.
 
8. Mitsubishi Motors (major automobile manufacturer in Japan) 7/10
Has agreed to start commercial base field test of the electric power storage system with French companies. The test will be conducted in Paris, France.
 
9. Daikin (equipment manufacturer in Japan) 7/14
Has begun field testing a micro hydroelectric power generation system that utilizes the power of city water and sewage.

10. Rohm (major device manufacturer in Japan) 7/14
Has developed the world’s smallest (2mm x 2mm) pressure sensor, BM1385GLV, with a high precision for mobile devices and wearable devices.

To read the full articles, click here.

To reach Dominique K. Numakura, visit www.dknresearchllc.com or email dnumakura@dknresearch.com.

Share




Suggested Items

EIPC Technical Snapshot: Novel Laser-based Manufacturing Processes in Automotive Electronics

09/22/2022 | Pete Starkey, I-Connect007
“Summer is over, now it's back to work!” This was the opening line of the invitation to the 18th EIPC Technical Snapshot webinar, Sept. 14, following the theme of advances in automotive electronics technology, introduced and moderated by EIPC President Alun Morgan. The first presentation, entitled "The fully printed smart component—combining additive manufacturing and sensor printing," came from Jonas Mertin, a thin-film processing specialist at the Fraunhofer Institute for Laser Technology.

Plating on Silver: What’s Old is New Again

07/07/2022 | Denis Jacques, Technic Inc.
About three decades ago, immersion silver, a nitrate-based process, gained a lot of market share in the world of PCB final finishes. More economical than ENIG, flat, solderable, and conductive, it had everything going for it—everything but corrosion resistance in a harsh environment, that is. Champagne voids were also an issue, along with line reduction. But the worst drawback, the characteristic that made the part short over time, was creep corrosion. A build-up of copper sulfide salt that grows in contact with a sulfur-rich environment, heat, and moisture resulted in failures in the field. This was enough to scar the process for good.

EIPC Summer Conference 2022: Day 2 Review

06/29/2022 | Pete Starkey, I-Connect007
Örebro, Sweden on June 15 brought a bright and early start to Day 2 of the EIPC Summer Conference for those who had enjoyed the previous evening’s networking dinner, but had resisted the temptation to over-indulge or to carry on their long-awaited catch-up conversations with old friends into the small hours. All but a few were in their seats for 9 a.m., awake and attentive for Session 4 of the conference, on the theme of new process technologies, moderated by Martyn Gaudion, CEO of Polar Instruments.



Copyright © 2022 I-Connect007. All rights reserved.