productronica 2015: Orbotech's Nuvogo 1000 Brings High Speed to Solder Mask LDI


Reading time ( words)

28 watts of laser power enables the Nuvogo 1000 dual wavelength direct imaging system to achieve production throughput for solder mask up to 40 double-sided panels per hour, while retaining the versatility to image inner layer and outer layer features as fine as 24 microns. Orbotech’s open cooperation with leading solder mask suppliers ensures that their customers achieve optimized performance over a wide range of material choices. Also, the intrinsic depth of focus of Orbotech’s laser optics copes easily with the height variations associated with flex-rigid constructions.

Watch the interview here.

Share




Suggested Items

Michael Carano: A Focus on Process Control, Part 2

09/28/2022 | I-Connect007 Editorial Team
In this second half of our conversation, Michael Carano discusses some of the metrics that fabricators need to consider before investing in new processes, especially process control technologies, and some of the challenges board shops face updating brownfield sites.

EIPC Technical Snapshot: Novel Laser-based Manufacturing Processes in Automotive Electronics

09/22/2022 | Pete Starkey, I-Connect007
“Summer is over, now it's back to work!” This was the opening line of the invitation to the 18th EIPC Technical Snapshot webinar, Sept. 14, following the theme of advances in automotive electronics technology, introduced and moderated by EIPC President Alun Morgan. The first presentation, entitled "The fully printed smart component—combining additive manufacturing and sensor printing," came from Jonas Mertin, a thin-film processing specialist at the Fraunhofer Institute for Laser Technology.

EIPC Summer Conference 2022: Day 2 Review

06/29/2022 | Pete Starkey, I-Connect007
Örebro, Sweden on June 15 brought a bright and early start to Day 2 of the EIPC Summer Conference for those who had enjoyed the previous evening’s networking dinner, but had resisted the temptation to over-indulge or to carry on their long-awaited catch-up conversations with old friends into the small hours. All but a few were in their seats for 9 a.m., awake and attentive for Session 4 of the conference, on the theme of new process technologies, moderated by Martyn Gaudion, CEO of Polar Instruments.



Copyright © 2022 I-Connect007. All rights reserved.