Isola to Exhibit and Present at DesignCon 2016 in Booth 507
December 16, 2015 | IsolaEstimated reading time: 1 minute
Now in its 21st year, DesignCon, which will be held in Santa Clara Convention Center on January 20-21, 2016, is the premier educational conference and technology exhibition for electronic design engineers in the high speed communications and semiconductor communities.
Join Isola in booth 507 to learn about the latest innovations in dielectric materials.
Join Isola at the following sessions during the show:
- A “Material” World, Modeling Dielectrics and Conductors for Interconnects Operating at 10-50 GBPS
- PCB-Substrate Characterization at Multigigahertz Frequencies Through SIW Measurements
- Characterizing Geometry-Dependent Crossover Frequency for Stripline Dielectric and Metal Losses
Taking place annually in Silicon Valley, DesignCon was created by engineers for engineers and remains the largest gathering of chip, board and systems designers in the country. Combining technical paper sessions, tutorials, industry panels, product demos and exhibits, DesignCon brings engineers the latest theories, methodologies, techniques, applications and demonstrations on PCB design tools, power and signal integrity, jitter and crosstalk, high-speed serial design, test and measurement tools, parallel and memory interface design, ICs, semiconductor components and more.
DesignCon enables chip, board and systems designers, software developers and silicon manufacturers to:
- Grow their design expertise
- Learn about and see the latest advanced design technologies and tools from top vendors in the industry
- Network with and gain inspiration from fellow engineers and design engineering experts
Suggested Items
Real Time with... IPC APEX EXPO 2024: Exploring IPC's PCB Design Courses with Kris Moyer
04/18/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and IPC instructor Kris Moyer discuss IPC's PCB design training and education offerings. They delve into course topics such as design fundamentals, mil/aero, rigid-flex, RF design, and advanced design concepts. They also highlight material selection for high-speed design, thermal management, and dissipation techniques. The interview wraps up with details about how to access these courses online.
Cadence Unveils Palladium Z3 and Protium X3 Systems
04/18/2024 | Cadence Design SystemsThe Palladium Z3 and Protium X3 systems offer increased capacity, and scale from job sizes of 16 million gates up to 48 billion gates, so the largest SoCs can be tested as a whole rather than just partial models, ensuring proper functionality and performance.
Signal Integrity Expert Donald Telian to Teach 'Signal Integrity, In Practice' Masterclass Globally
04/17/2024 | PRLOGDonald Telian and The EEcosystem announce the global tour of "Signal Integrity, In Practice," a groundbreaking LIVE masterclass designed to equip hardware engineers with essential skills for solving Signal Integrity (SI) challenges in today's fast-paced technological landscape.
On the Line With... Podcast Talks With Cadence Expert on Manufacturing
04/18/2024 | I-Connect007In “PCB 3.0: A New Design Methodology: Manufacturing” Patrick Davis returns to the podcast to talk about design rules. As design considerations become more and more complex, so, too, do the rulesets designers must abide by.
Designing Electronics for High Thermal Loads
04/16/2024 | Akber Roy, Rush PCB Inc.Developing proactive thermal management strategies is important in the early stages of the PCB design cycle to minimize costly redesign iterations. Here, I delve into key aspects of electronic design that hold particular relevance for managing heat in electronic systems. Each of these considerations plays a pivotal role in enhancing the reliability and performance of the overall system.