IPC Committee Works to Develop Shop Floor Communication Standard


Reading time ( words)

On Wednesday, March 16, at IPC APEX EXPO, IPC’s 2-13 Shop Floor Communications Subcommittee brought together leading software developers, machine vendors, assembly equipment manufacturers and their customers to work on development of a new IPC standard to meet the current and future needs of industry that will fill a gap identified by the group. This new standard will provide uniformity of data protocols that will allow ease of machine to machine communication.

The subcommittee is firmly committed to developing the standard and is also working to provide an easy-to-understand definition of Industry 4.0 and its significance,” said Subcommittee Chairman Jason Spera, CEO of Aegis Software. “The group is working to identify additional committee leaders from the customer and machine side.”

“Machine vendors want to engage quickly and all parties agree that a replacement for the current IPC-2541, Generic Requirements for Electronics Manufacturing Shop-Floor Equipment Communication Messages (CAMX) is needed and demanded by industry and speed of execution is critical,” said David Bergman, IPC vice president of standards and training. “During the meeting two commercial initiatives were presented, and based on those two presentations, the subcommittee realized that several licensing and intellectual property issues need to be resolved before the new standard can progress. The subcommittee also determined that the IP cannot be controlled by any entity other than IPC, nor a revenue generator for any company contributing to the standard.”

For more information on this evolving standard and 2-13 subcommittee activities, contact Bergman, at DavidBergman@ipc.org or +1 847-597-2840.

About IPC

IPC is a global industry association based in Bannockburn, Ill., dedicated to the competitive excellence and financial success of its 3,700 member companies which represent all facets of the electronics industry, including design, printed board manufacturing, electronics assembly and test. As a member-driven organization and leading source for industry standards, training, market research and public policy advocacy, IPC supports programs to meet the needs of an estimated $2 trillion global electronics industry. IPC maintains additional offices in Taos, N.M.; Washington, D.C.; Atlanta, Ga.; Brussels, Belgium; Stockholm, Sweden; Moscow, Russia; Bangalore and New Delhi, India; Bangkok, Thailand; and Qingdao, Shanghai, Shenzhen, Chengdu, Suzhou and Beijing, China.

 

Share

Print


Suggested Items

GEN3 Webinar, Part 8 Released: New IEC Standards—A Walk Through

01/12/2022 | I-Connect007 Editorial Team
In this engaging, 11-part micro webinar series, topic experts Graham Naisbitt and Chris Hunt examine the history of the influences of Electrochemical Migration (ECM) and the evolving use of Surface Insulation Resistance Testing (SIR) that has been developed over the past 25 years by GEN3 and its association with the British National Physical Laboratory. GEN3 and NPL have created the standard that has now been in widespread use around the world since the turn of the millennium. The eighth episode, “New IEC Standards—A Walk Through” can be viewed in just over five minutes. Presenters discuss scope, measurement technique, the B52 and field gradient, dummy components and the test chamber.

GEN3 Webinar, Part 7 Released: SIR Test Coupon Design

01/05/2022 | I-Connect007 Editorial Team
In this engaging, 11-part micro webinar series, topic experts Graham Naisbitt and Chris Hunt examine the history of the influences of Electrochemical Migration (ECM) and the evolving use of Surface Insulation Resistance Testing (SIR) that has been developed over the past 25 years by GEN3 and its association with the British National Physical Laboratory. GEN3 and NPL have created the standard that has now been in widespread use around the world since the turn of the millennium.

Don’t Miss Further Discussion of Materials Testing in GEN3 Episode 6 of ‘Predicting Reliability in Electronics’

12/22/2021 | I-Connect007 Editorial Team
The sixth episode, “Materials Testing—Process Materials,” can be viewed in under four minutes. Presenters share information on paste vs. flux vs. rework, limitations of standards, hand soldering/rework cautions, and more. Designed to complement GEN3’s book, The Printed Circuit Assembler’s Guide to...Process Validation, this entire webinar series can be viewed in about an hour and covers a comprehensive range of topics surrounding the four groundbreaking test standards published between 2019 and 2021 that set the scene for Objective Evidence and its widespread influence throughout the world of electronics, whether in the high reliability arena of space, medical, automotive, or general industrial applications.



Copyright © 2022 I-Connect007. All rights reserved.