Flex is Where It’s At


Reading time ( words)

A number of the more astute PCB companies are finding the local SMTA expos very advantageous to attend and exhibit at, and it is interesting to talk with them when possible. I met with Jack Baculik of Circuits LLC, a rather new flex manufacturer not far from the SMTA-Ohio Expo we were both attending. It sure seems that flex and rigid-flex is what everyone is looking at.

Patty Goldman: Jack, please fill me in a little bit on Circuits LLC. I don't know very much even though they're rather close by to me.

Jack Baculik: We are close by. Circuits LLC has been in business since 2008, so we’re a relatively new company located in Murrysville, Pennsylvania, which is a suburb of Pittsburgh. We’re considered a small company by the federal government; we have 25 employees. We make flex and rigid-flex printed circuit boards, so we don't make any rigid boards, but if it has a piece of flex in it we'll build it. So that's one niche of ours.

Another niche of ours is our experience. Even though we're a new company we have well over 200 years of manufacturing and engineering experience in making the flex product. We work with companies up front and help them out with material choices, bend radius, impedance—because a lot of companies are still new to flex, even though flex has been around for many, many years some people are new to it.

Goldman: I feel like they're waking up to it.

Baculik: Waking up to it out of necessity. Some people have maybe used it 20 years ago, got burned by it because it was just a bad experience and now they need to fit something big into a small footprint and flex or rigid-flex is the only way to go.

Goldman: I guess there are more and more applications, and more need?

Baculik: Yeah, a lot of hand-held products. Military is big in flex and rigid-flex. It's a very robust product. We make boards that go into military devices. They're out in the field and these soldiers need to communicate with each other so they can't be having breakdowns out in the field.

Goldman: So military is one of the markets you serve. How about medical?

Baculik: Medical, industrial controls, industrial products.

Goldman: So a lot of things use flex, really.

Baculik: Yes. Your iPhone has flex even though it's not bent, like for weight issues, because it's very light and thin.

Goldman: Are most of the applications involving something that's going to be bent or folded? Like you said, the cellphone has it in there but it's flat.

Baculik: I would say the majority of the applications would be bend-to-install. So you'll populate the parts and you'll bend the flex circuit and put it into whatever box it's going into.

Goldman: And there it stays.

Baculik: It temporarily stays. Sometimes it can be dynamic, where it's opening and closing a couple hundred thousand times, but more times than not it will be bend-to-install.

CircuitsLLC-SMTA.jpg

Goldman: That's a pretty important part of it though, because otherwise it won't fit! Laughs)

Baculik: We need to know bend-to-install versus a dynamic application. If it’s dynamic, you’re going to get a change of material, you’re going to have to change your copper, and then change how it’s manufactured. It's good to work with the costumer up front to know what their end products will be so we can help them go down the right path.

Goldman: I hear that both ways, that some costumers don't want to work with the circuit board shop. They just want to throw it over the wall. Do you find in flex that most people want to work with you?

Baculik: They do, because you can take the other parts and throw it over the wall and who knows how many times you're going to revise something to get it to work. You’re spending all that time and money trying to get your end product to do what you want it to do. Whereas if you work with them up front it will only take one or two spins, and then you can define the design a lot quicker and cheaper. It's less of a headache for everybody.

Goldman: How long have you been with Circuits LLC?

Baculik: I've been there since 2013. So three and a half years.

Goldman: It's going well, I take it?

Baculik: Yeah, things are going well. Business is improving every year and there's more and more need for flex.

Goldman: It's the latest, greatest, we always say. Especially when you throw in rigid-flex, your possibilities become endless, I would think. How's the show here for you?

Baculik: The show's been going well. We've had a few people stop by that could be some potential business. All it takes is the one good one and it's all worthwhile.

Goldman: As I was thinking before that, if you want to pick up business in the local area, these little SMTA shows seem like the way to go. They present a great opportunity to meet potential customers face-to-face in a nice, laid-back atmosphere.

Baculik: We're about half way through the day, but it's been going good.

Goldman: Great. More power to you! Nice talking with you.

Baculik: Thank you very much.

Share

Print


Suggested Items

A Tour of the New Isola Factory: Investing in North America

12/23/2021 | Barry Matties, I-Connect007
Barry Matties recently toured Isola’s new 118,000-square-foot low-volume, high-mix manufacturing facility in Chandler, Arizona. The facility’s construction began in 2020 and, like many building projects, was delayed because of the COVID-19 pandemic. Building a new factory during the pandemic was certainly a challenge but the team persevered and the new greenfield facility is now operating to meet the needs of the North American market. During the tour, Barry met with Travis Kelly, Ed Kelley, Sean Mirshafiei, Jenny Inocencio, and Walt Niziolek. They covered a range of topics, including lab operations, hiring, the supply chain, R&D, and the concept of the new facility. The factory was designed to extensively utilize automation to improve efficiencies and, as Travis Kelly stated, “to de-risk the labor shortage issue.”

Agfa Taking Leap to Digital Platform

12/13/2021 | Pete Starkey, I-Connect007
I-Connect007 Technical Editor Pete Starkey spoke with Agfa Business Unit Manager Frank Louwet ahead of last month’s productronica show in Europe. They discuss the company’s desire to reduce its carbon footprint and the benefits of this change, particularly with a move to digital inkjet printing, and describes some of the company’s newest products. As Louwet explains, "Our claim is 'Grow your business, not your footprint.' By going digital you can grow your business without having to increase your waste materials, your processing chemicals, your water, and even your floor space."

Insulectro Passionate About Educational Programs

12/10/2021 | I-Connect007 Editorial Team
Ken Parent, Chris Hunrath, and Michelle Walsh discuss their educational and training vision, programs that they are bringing to the industry, and why. There’s a gap, they say, in the talent pool from entry level to engineers. “There’s a huge demand now,” says Chris Hunrath. “The quicker we can fill that gap and train new people, the more PCBs can be built and more of the new products and technology will be accepted into the industry.” We are living in a people-constrained business today.



Copyright © 2022 I-Connect007. All rights reserved.